[−][src]Enum amq_protocol_tcp::TcpStream
Re-export TcpStream Wrapper around plain or TLS TCP streams
Variants
Wrapper around std::net::TcpStream
Wrapper around a TLS stream hanled by rustls
Implementations
impl TcpStream
[src]
Re-export TcpStream
pub fn connect<A>(addr: A) -> Result<TcpStream, Error> where
A: ToSocketAddrs,
[src]
A: ToSocketAddrs,
Wrapper around std::net::TcpStream::connect
pub fn connect_timeout<A>(
addr: A,
timeout: Duration
) -> Result<TcpStream, Error> where
A: ToSocketAddrs,
[src]
addr: A,
timeout: Duration
) -> Result<TcpStream, Error> where
A: ToSocketAddrs,
Wrapper around std::net::TcpStream::connect_timeout
pub fn from_std(stream: TcpStream) -> Result<TcpStream, Error>
[src]
Convert from a std::net::TcpStream
#[must_use]pub fn is_connected(&self) -> bool
[src]
Check whether the stream is connected or not
pub fn try_connect(&mut self) -> Result<bool, Error>
[src]
Retry the connection. Returns:
- Ok(true) if connected
- Ok(false) if connecting
- Err(_) if an error is encountered
pub fn into_tls(
self,
domain: &str,
config: TLSConfig<'_, '_, '_>
) -> Result<TcpStream, HandshakeError>
[src]
self,
domain: &str,
config: TLSConfig<'_, '_, '_>
) -> Result<TcpStream, HandshakeError>
Enable TLS
pub fn into_rustls(
self,
connector: &RustlsConnector,
domain: &str
) -> Result<TcpStream, HandshakeError>
[src]
self,
connector: &RustlsConnector,
domain: &str
) -> Result<TcpStream, HandshakeError>
Enable TLS using rustls
impl TcpStream
[src]
Re-export TcpStream
pub fn is_readable(&self) -> Result<(), Error>
[src]
Attempt reading from underlying stream, returning Ok(()) if the stream is readable
pub fn is_writable(&self) -> Result<(), Error>
[src]
Attempt writing to underlying stream, returning Ok(()) if the stream is writable
Methods from Deref<Target = TcpStream>
pub fn peer_addr(&self) -> Result<SocketAddr, Error>
1.0.0[src]
Returns the socket address of the remote peer of this TCP connection.
Examples
use std::net::{Ipv4Addr, SocketAddr, SocketAddrV4, TcpStream}; let stream = TcpStream::connect("127.0.0.1:8080") .expect("Couldn't connect to the server..."); assert_eq!(stream.peer_addr().unwrap(), SocketAddr::V4(SocketAddrV4::new(Ipv4Addr::new(127, 0, 0, 1), 8080)));
pub fn local_addr(&self) -> Result<SocketAddr, Error>
1.0.0[src]
Returns the socket address of the local half of this TCP connection.
Examples
use std::net::{IpAddr, Ipv4Addr, TcpStream}; let stream = TcpStream::connect("127.0.0.1:8080") .expect("Couldn't connect to the server..."); assert_eq!(stream.local_addr().unwrap().ip(), IpAddr::V4(Ipv4Addr::new(127, 0, 0, 1)));
pub fn shutdown(&self, how: Shutdown) -> Result<(), Error>
1.0.0[src]
Shuts down the read, write, or both halves of this connection.
This function will cause all pending and future I/O on the specified
portions to return immediately with an appropriate value (see the
documentation of Shutdown
).
Platform-specific behavior
Calling this function multiple times may result in different behavior,
depending on the operating system. On Linux, the second call will
return Ok(())
, but on macOS, it will return ErrorKind::NotConnected
.
This may change in the future.
Examples
use std::net::{Shutdown, TcpStream}; let stream = TcpStream::connect("127.0.0.1:8080") .expect("Couldn't connect to the server..."); stream.shutdown(Shutdown::Both).expect("shutdown call failed");
pub fn try_clone(&self) -> Result<TcpStream, Error>
1.0.0[src]
Creates a new independently owned handle to the underlying socket.
The returned TcpStream
is a reference to the same stream that this
object references. Both handles will read and write the same stream of
data, and options set on one stream will be propagated to the other
stream.
Examples
use std::net::TcpStream; let stream = TcpStream::connect("127.0.0.1:8080") .expect("Couldn't connect to the server..."); let stream_clone = stream.try_clone().expect("clone failed...");
pub fn set_read_timeout(&self, dur: Option<Duration>) -> Result<(), Error>
1.4.0[src]
Sets the read timeout to the timeout specified.
If the value specified is None
, then read
calls will block
indefinitely. An Err
is returned if the zero Duration
is
passed to this method.
Platform-specific behavior
Platforms may return a different error code whenever a read times out as
a result of setting this option. For example Unix typically returns an
error of the kind WouldBlock
, but Windows may return TimedOut
.
Examples
use std::net::TcpStream; let stream = TcpStream::connect("127.0.0.1:8080") .expect("Couldn't connect to the server..."); stream.set_read_timeout(None).expect("set_read_timeout call failed");
An Err
is returned if the zero Duration
is passed to this
method:
use std::io; use std::net::TcpStream; use std::time::Duration; let stream = TcpStream::connect("127.0.0.1:8080").unwrap(); let result = stream.set_read_timeout(Some(Duration::new(0, 0))); let err = result.unwrap_err(); assert_eq!(err.kind(), io::ErrorKind::InvalidInput)
pub fn set_write_timeout(&self, dur: Option<Duration>) -> Result<(), Error>
1.4.0[src]
Sets the write timeout to the timeout specified.
If the value specified is None
, then write
calls will block
indefinitely. An Err
is returned if the zero Duration
is
passed to this method.
Platform-specific behavior
Platforms may return a different error code whenever a write times out
as a result of setting this option. For example Unix typically returns
an error of the kind WouldBlock
, but Windows may return TimedOut
.
Examples
use std::net::TcpStream; let stream = TcpStream::connect("127.0.0.1:8080") .expect("Couldn't connect to the server..."); stream.set_write_timeout(None).expect("set_write_timeout call failed");
An Err
is returned if the zero Duration
is passed to this
method:
use std::io; use std::net::TcpStream; use std::time::Duration; let stream = TcpStream::connect("127.0.0.1:8080").unwrap(); let result = stream.set_write_timeout(Some(Duration::new(0, 0))); let err = result.unwrap_err(); assert_eq!(err.kind(), io::ErrorKind::InvalidInput)
pub fn read_timeout(&self) -> Result<Option<Duration>, Error>
1.4.0[src]
Returns the read timeout of this socket.
If the timeout is None
, then read
calls will block indefinitely.
Platform-specific behavior
Some platforms do not provide access to the current timeout.
Examples
use std::net::TcpStream; let stream = TcpStream::connect("127.0.0.1:8080") .expect("Couldn't connect to the server..."); stream.set_read_timeout(None).expect("set_read_timeout call failed"); assert_eq!(stream.read_timeout().unwrap(), None);
pub fn write_timeout(&self) -> Result<Option<Duration>, Error>
1.4.0[src]
Returns the write timeout of this socket.
If the timeout is None
, then write
calls will block indefinitely.
Platform-specific behavior
Some platforms do not provide access to the current timeout.
Examples
use std::net::TcpStream; let stream = TcpStream::connect("127.0.0.1:8080") .expect("Couldn't connect to the server..."); stream.set_write_timeout(None).expect("set_write_timeout call failed"); assert_eq!(stream.write_timeout().unwrap(), None);
pub fn peek(&self, buf: &mut [u8]) -> Result<usize, Error>
1.18.0[src]
Receives data on the socket from the remote address to which it is connected, without removing that data from the queue. On success, returns the number of bytes peeked.
Successive calls return the same data. This is accomplished by passing
MSG_PEEK
as a flag to the underlying recv
system call.
Examples
use std::net::TcpStream; let stream = TcpStream::connect("127.0.0.1:8000") .expect("couldn't bind to address"); let mut buf = [0; 10]; let len = stream.peek(&mut buf).expect("peek failed");
pub fn set_nodelay(&self, nodelay: bool) -> Result<(), Error>
1.9.0[src]
Sets the value of the TCP_NODELAY
option on this socket.
If set, this option disables the Nagle algorithm. This means that segments are always sent as soon as possible, even if there is only a small amount of data. When not set, data is buffered until there is a sufficient amount to send out, thereby avoiding the frequent sending of small packets.
Examples
use std::net::TcpStream; let stream = TcpStream::connect("127.0.0.1:8080") .expect("Couldn't connect to the server..."); stream.set_nodelay(true).expect("set_nodelay call failed");
pub fn nodelay(&self) -> Result<bool, Error>
1.9.0[src]
Gets the value of the TCP_NODELAY
option on this socket.
For more information about this option, see TcpStream::set_nodelay
.
Examples
use std::net::TcpStream; let stream = TcpStream::connect("127.0.0.1:8080") .expect("Couldn't connect to the server..."); stream.set_nodelay(true).expect("set_nodelay call failed"); assert_eq!(stream.nodelay().unwrap_or(false), true);
pub fn set_ttl(&self, ttl: u32) -> Result<(), Error>
1.9.0[src]
Sets the value for the IP_TTL
option on this socket.
This value sets the time-to-live field that is used in every packet sent from this socket.
Examples
use std::net::TcpStream; let stream = TcpStream::connect("127.0.0.1:8080") .expect("Couldn't connect to the server..."); stream.set_ttl(100).expect("set_ttl call failed");
pub fn ttl(&self) -> Result<u32, Error>
1.9.0[src]
Gets the value of the IP_TTL
option for this socket.
For more information about this option, see TcpStream::set_ttl
.
Examples
use std::net::TcpStream; let stream = TcpStream::connect("127.0.0.1:8080") .expect("Couldn't connect to the server..."); stream.set_ttl(100).expect("set_ttl call failed"); assert_eq!(stream.ttl().unwrap_or(0), 100);
pub fn take_error(&self) -> Result<Option<Error>, Error>
1.9.0[src]
Gets the value of the SO_ERROR
option on this socket.
This will retrieve the stored error in the underlying socket, clearing the field in the process. This can be useful for checking errors between calls.
Examples
use std::net::TcpStream; let stream = TcpStream::connect("127.0.0.1:8080") .expect("Couldn't connect to the server..."); stream.take_error().expect("No error was expected...");
pub fn set_nonblocking(&self, nonblocking: bool) -> Result<(), Error>
1.9.0[src]
Moves this TCP stream into or out of nonblocking mode.
This will result in read
, write
, recv
and send
operations
becoming nonblocking, i.e., immediately returning from their calls.
If the IO operation is successful, Ok
is returned and no further
action is required. If the IO operation could not be completed and needs
to be retried, an error with kind io::ErrorKind::WouldBlock
is
returned.
On Unix platforms, calling this method corresponds to calling fcntl
FIONBIO
. On Windows calling this method corresponds to calling
ioctlsocket
FIONBIO
.
Examples
Reading bytes from a TCP stream in non-blocking mode:
use std::io::{self, Read}; use std::net::TcpStream; let mut stream = TcpStream::connect("127.0.0.1:7878") .expect("Couldn't connect to the server..."); stream.set_nonblocking(true).expect("set_nonblocking call failed"); let mut buf = vec![]; loop { match stream.read_to_end(&mut buf) { Ok(_) => break, Err(ref e) if e.kind() == io::ErrorKind::WouldBlock => { // wait until network socket is ready, typically implemented // via platform-specific APIs such as epoll or IOCP wait_for_fd(); } Err(e) => panic!("encountered IO error: {}", e), }; }; println!("bytes: {:?}", buf);
Trait Implementations
impl AsRawFd for TcpStream
[src]
impl<'_> AsRawFd for &'_ TcpStream
[src]
impl Debug for TcpStream
[src]
impl Deref for TcpStream
[src]
type Target = TcpStream
The resulting type after dereferencing.
pub fn deref(&self) -> &<TcpStream as Deref>::Targetⓘ
[src]
impl DerefMut for TcpStream
[src]
impl From<StreamOwned<ClientSession, TcpStream>> for TcpStream
[src]
impl From<TcpStream> for MidHandshakeTlsStream
[src]
pub fn from(mid: TcpStream) -> MidHandshakeTlsStream
[src]
impl FromRawFd for TcpStream
[src]
pub unsafe fn from_raw_fd(fd: i32) -> TcpStreamⓘ
[src]
impl Read for TcpStream
[src]
pub fn read(&mut self, buf: &mut [u8]) -> Result<usize, Error>
[src]
pub fn read_vectored(
&mut self,
bufs: &mut [IoSliceMut<'_>]
) -> Result<usize, Error>
[src]
&mut self,
bufs: &mut [IoSliceMut<'_>]
) -> Result<usize, Error>
pub fn read_to_end(&mut self, buf: &mut Vec<u8, Global>) -> Result<usize, Error>
[src]
pub fn read_to_string(&mut self, buf: &mut String) -> Result<usize, Error>
[src]
pub fn read_exact(&mut self, buf: &mut [u8]) -> Result<(), Error>
[src]
pub fn is_read_vectored(&self) -> bool
[src]
pub unsafe fn initializer(&self) -> Initializer
[src]
pub fn by_ref(&mut self) -> &mut Self
1.0.0[src]
pub fn bytes(self) -> Bytes<Self>
1.0.0[src]
pub fn chain<R>(self, next: R) -> Chain<Self, R> where
R: Read,
1.0.0[src]
R: Read,
pub fn take(self, limit: u64) -> Take<Self>
1.0.0[src]
impl TryFrom<TcpStream> for TcpStream
[src]
type Error = Error
The type returned in the event of a conversion error.
pub fn try_from(s: TcpStream) -> Result<TcpStream, Error>
[src]
impl Write for TcpStream
[src]
pub fn write(&mut self, buf: &[u8]) -> Result<usize, Error>
[src]
pub fn flush(&mut self) -> Result<(), Error>
[src]
pub fn write_vectored(&mut self, bufs: &[IoSlice<'_>]) -> Result<usize, Error>
[src]
pub fn write_all(&mut self, buf: &[u8]) -> Result<(), Error>
[src]
pub fn write_fmt(&mut self, fmt: Arguments<'_>) -> Result<(), Error>
[src]
pub fn is_write_vectored(&self) -> bool
[src]
pub fn write_all_vectored(
&mut self,
bufs: &mut [IoSlice<'_>]
) -> Result<(), Error>
[src]
&mut self,
bufs: &mut [IoSlice<'_>]
) -> Result<(), Error>
pub fn by_ref(&mut self) -> &mut Self
1.0.0[src]
Auto Trait Implementations
impl !RefUnwindSafe for TcpStream
[src]
impl Send for TcpStream
[src]
impl Sync for TcpStream
[src]
impl Unpin for TcpStream
[src]
impl !UnwindSafe for TcpStream
[src]
Blanket Implementations
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,
impl<T> Borrow<T> for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
[src]
T: ?Sized,
pub fn borrow_mut(&mut self) -> &mut T
[src]
impl<T> Conv for T
impl<T> Conv for T
impl<T> FmtForward for T
pub fn fmt_binary(self) -> FmtBinary<Self> where
Self: Binary,
Self: Binary,
pub fn fmt_display(self) -> FmtDisplay<Self> where
Self: Display,
Self: Display,
pub fn fmt_lower_exp(self) -> FmtLowerExp<Self> where
Self: LowerExp,
Self: LowerExp,
pub fn fmt_lower_hex(self) -> FmtLowerHex<Self> where
Self: LowerHex,
Self: LowerHex,
pub fn fmt_octal(self) -> FmtOctal<Self> where
Self: Octal,
Self: Octal,
pub fn fmt_pointer(self) -> FmtPointer<Self> where
Self: Pointer,
Self: Pointer,
pub fn fmt_upper_exp(self) -> FmtUpperExp<Self> where
Self: UpperExp,
Self: UpperExp,
pub fn fmt_upper_hex(self) -> FmtUpperHex<Self> where
Self: UpperHex,
Self: UpperHex,
impl<T> From<T> for T
[src]
impl<T> Instrument for T
[src]
pub fn instrument(self, span: Span) -> Instrumented<Self>
[src]
pub fn in_current_span(self) -> Instrumented<Self>
[src]
impl<T, U> Into<U> for T where
U: From<T>,
[src]
U: From<T>,
impl<T> Pipe for T where
T: ?Sized,
T: ?Sized,
pub fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> R
pub fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> R where
R: 'a,
R: 'a,
pub fn pipe_ref_mut<'a, R>(
&'a mut self,
func: impl FnOnce(&'a mut Self) -> R
) -> R where
R: 'a,
&'a mut self,
func: impl FnOnce(&'a mut Self) -> R
) -> R where
R: 'a,
pub fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R where
Self: Borrow<B>,
R: 'a,
B: 'a + ?Sized,
Self: Borrow<B>,
R: 'a,
B: 'a + ?Sized,
pub fn pipe_borrow_mut<'a, B, R>(
&'a mut self,
func: impl FnOnce(&'a mut B) -> R
) -> R where
Self: BorrowMut<B>,
R: 'a,
B: 'a + ?Sized,
&'a mut self,
func: impl FnOnce(&'a mut B) -> R
) -> R where
Self: BorrowMut<B>,
R: 'a,
B: 'a + ?Sized,
pub fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R where
Self: AsRef<U>,
U: 'a + ?Sized,
R: 'a,
Self: AsRef<U>,
U: 'a + ?Sized,
R: 'a,
pub fn pipe_as_mut<'a, U, R>(
&'a mut self,
func: impl FnOnce(&'a mut U) -> R
) -> R where
Self: AsMut<U>,
U: 'a + ?Sized,
R: 'a,
&'a mut self,
func: impl FnOnce(&'a mut U) -> R
) -> R where
Self: AsMut<U>,
U: 'a + ?Sized,
R: 'a,
pub fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R where
Self: Deref<Target = T>,
T: 'a + ?Sized,
R: 'a,
Self: Deref<Target = T>,
T: 'a + ?Sized,
R: 'a,
pub fn pipe_deref_mut<'a, T, R>(
&'a mut self,
func: impl FnOnce(&'a mut T) -> R
) -> R where
Self: DerefMut<Target = T> + Deref,
T: 'a + ?Sized,
R: 'a,
&'a mut self,
func: impl FnOnce(&'a mut T) -> R
) -> R where
Self: DerefMut<Target = T> + Deref,
T: 'a + ?Sized,
R: 'a,
impl<T> Pipe for T
impl<T> PipeAsRef for T
pub fn pipe_as_ref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R where
Self: AsRef<T>,
T: 'a,
R: 'a,
Self: AsRef<T>,
T: 'a,
R: 'a,
pub fn pipe_as_mut<'a, T, R>(
&'a mut self,
func: impl FnOnce(&'a mut T) -> R
) -> R where
Self: AsMut<T>,
T: 'a,
R: 'a,
&'a mut self,
func: impl FnOnce(&'a mut T) -> R
) -> R where
Self: AsMut<T>,
T: 'a,
R: 'a,
impl<T> PipeBorrow for T
pub fn pipe_borrow<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R where
Self: Borrow<T>,
T: 'a,
R: 'a,
Self: Borrow<T>,
T: 'a,
R: 'a,
pub fn pipe_borrow_mut<'a, T, R>(
&'a mut self,
func: impl FnOnce(&'a mut T) -> R
) -> R where
Self: BorrowMut<T>,
T: 'a,
R: 'a,
&'a mut self,
func: impl FnOnce(&'a mut T) -> R
) -> R where
Self: BorrowMut<T>,
T: 'a,
R: 'a,
impl<T> PipeDeref for T
pub fn pipe_deref<'a, R>(
&'a self,
func: impl FnOnce(&'a Self::Target) -> R
) -> R where
Self: Deref,
R: 'a,
&'a self,
func: impl FnOnce(&'a Self::Target) -> R
) -> R where
Self: Deref,
R: 'a,
pub fn pipe_deref_mut<'a, R>(
&'a mut self,
func: impl FnOnce(&'a mut Self::Target) -> R
) -> R where
Self: DerefMut,
R: 'a,
&'a mut self,
func: impl FnOnce(&'a mut Self::Target) -> R
) -> R where
Self: DerefMut,
R: 'a,
impl<T> PipeRef for T
pub fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> R where
R: 'a,
R: 'a,
pub fn pipe_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> R where
R: 'a,
R: 'a,
impl<T> Same<T> for T
type Output = T
Should always be Self
impl<T> Tap for T
pub fn tap(self, func: impl FnOnce(&Self)) -> Self
pub fn tap_mut(self, func: impl FnOnce(&mut Self)) -> Self
pub fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self where
Self: Borrow<B>,
B: ?Sized,
Self: Borrow<B>,
B: ?Sized,
pub fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self where
Self: BorrowMut<B>,
B: ?Sized,
Self: BorrowMut<B>,
B: ?Sized,
pub fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self where
Self: AsRef<R>,
R: ?Sized,
Self: AsRef<R>,
R: ?Sized,
pub fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self where
Self: AsMut<R>,
R: ?Sized,
Self: AsMut<R>,
R: ?Sized,
pub fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self where
Self: Deref<Target = T>,
T: ?Sized,
Self: Deref<Target = T>,
T: ?Sized,
pub fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self where
Self: DerefMut<Target = T> + Deref,
T: ?Sized,
Self: DerefMut<Target = T> + Deref,
T: ?Sized,
pub fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self
pub fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self
pub fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self where
Self: Borrow<B>,
B: ?Sized,
Self: Borrow<B>,
B: ?Sized,
pub fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self where
Self: BorrowMut<B>,
B: ?Sized,
Self: BorrowMut<B>,
B: ?Sized,
pub fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self where
Self: AsRef<R>,
R: ?Sized,
Self: AsRef<R>,
R: ?Sized,
pub fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self where
Self: AsMut<R>,
R: ?Sized,
Self: AsMut<R>,
R: ?Sized,
pub fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self where
Self: Deref<Target = T>,
T: ?Sized,
Self: Deref<Target = T>,
T: ?Sized,
pub fn tap_deref_mut_dbg<T>(self, func: impl FnOnce(&mut T)) -> Self where
Self: DerefMut<Target = T> + Deref,
T: ?Sized,
Self: DerefMut<Target = T> + Deref,
T: ?Sized,
impl<T> Tap for T
pub fn tap<F, R>(self, func: F) -> Self where
F: FnOnce(&Self) -> R,
F: FnOnce(&Self) -> R,
pub fn tap_dbg<F, R>(self, func: F) -> Self where
F: FnOnce(&Self) -> R,
F: FnOnce(&Self) -> R,
pub fn tap_mut<F, R>(self, func: F) -> Self where
F: FnOnce(&mut Self) -> R,
F: FnOnce(&mut Self) -> R,
pub fn tap_mut_dbg<F, R>(self, func: F) -> Self where
F: FnOnce(&mut Self) -> R,
F: FnOnce(&mut Self) -> R,
impl<T, U> TapAsRef<U> for T where
U: ?Sized,
U: ?Sized,
pub fn tap_ref<F, R>(self, func: F) -> Self where
Self: AsRef<T>,
F: FnOnce(&T) -> R,
Self: AsRef<T>,
F: FnOnce(&T) -> R,
pub fn tap_ref_dbg<F, R>(self, func: F) -> Self where
Self: AsRef<T>,
F: FnOnce(&T) -> R,
Self: AsRef<T>,
F: FnOnce(&T) -> R,
pub fn tap_ref_mut<F, R>(self, func: F) -> Self where
Self: AsMut<T>,
F: FnOnce(&mut T) -> R,
Self: AsMut<T>,
F: FnOnce(&mut T) -> R,
pub fn tap_ref_mut_dbg<F, R>(self, func: F) -> Self where
Self: AsMut<T>,
F: FnOnce(&mut T) -> R,
Self: AsMut<T>,
F: FnOnce(&mut T) -> R,
impl<T, U> TapBorrow<U> for T where
U: ?Sized,
U: ?Sized,
pub fn tap_borrow<F, R>(self, func: F) -> Self where
Self: Borrow<T>,
F: FnOnce(&T) -> R,
Self: Borrow<T>,
F: FnOnce(&T) -> R,
pub fn tap_borrow_dbg<F, R>(self, func: F) -> Self where
Self: Borrow<T>,
F: FnOnce(&T) -> R,
Self: Borrow<T>,
F: FnOnce(&T) -> R,
pub fn tap_borrow_mut<F, R>(self, func: F) -> Self where
Self: BorrowMut<T>,
F: FnOnce(&mut T) -> R,
Self: BorrowMut<T>,
F: FnOnce(&mut T) -> R,
pub fn tap_borrow_mut_dbg<F, R>(self, func: F) -> Self where
Self: BorrowMut<T>,
F: FnOnce(&mut T) -> R,
Self: BorrowMut<T>,
F: FnOnce(&mut T) -> R,
impl<T> TapDeref for T
pub fn tap_deref<F, R>(self, func: F) -> Self where
Self: Deref,
F: FnOnce(&Self::Target) -> R,
Self: Deref,
F: FnOnce(&Self::Target) -> R,
pub fn tap_deref_dbg<F, R>(self, func: F) -> Self where
Self: Deref,
F: FnOnce(&Self::Target) -> R,
Self: Deref,
F: FnOnce(&Self::Target) -> R,
pub fn tap_deref_mut<F, R>(self, func: F) -> Self where
Self: DerefMut,
F: FnOnce(&mut Self::Target) -> R,
Self: DerefMut,
F: FnOnce(&mut Self::Target) -> R,
pub fn tap_deref_mut_dbg<F, R>(self, func: F) -> Self where
Self: DerefMut,
F: FnOnce(&mut Self::Target) -> R,
Self: DerefMut,
F: FnOnce(&mut Self::Target) -> R,
impl<T> TryConv for T
impl<T> TryConv for T
impl<T, U> TryFrom<U> for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
pub fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T, U> TryInto<U> for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,