Struct alt_stm32f30x_hal::gpio::PB6
source · [−]Expand description
Pin
Implementations
sourceimpl<PT: PullType, PM: PinMode> PB6<PT, PM>
impl<PT: PullType, PM: PinMode> PB6<PT, PM>
sourcepub fn downgrade(self) -> PBx<PT, PM>
pub fn downgrade(self) -> PBx<PT, PM>
Erases the pin number from the type
This is useful when you want to collect the pins into an array where you need all the elements to have the same type
sourceimpl<PT: PullType, OT: OutputType, OS: OutputSpeed> PB6<PT, Output<OT, OS>>
impl<PT: PullType, OT: OutputType, OS: OutputSpeed> PB6<PT, Output<OT, OS>>
sourcepub fn output_type<NOT: OutputType>(self, ot: NOT) -> PB6<PT, Output<NOT, OS>>
pub fn output_type<NOT: OutputType>(self, ot: NOT) -> PB6<PT, Output<NOT, OS>>
Set output type
sourcepub fn open_drain(self) -> PB6<PT, Output<OpenDrain, OS>>
pub fn open_drain(self) -> PB6<PT, Output<OpenDrain, OS>>
Set output type to OpenDrain
sourcepub fn output_speed<NOS: OutputSpeed>(self, os: NOS) -> PB6<PT, Output<OT, NOS>>
pub fn output_speed<NOS: OutputSpeed>(self, os: NOS) -> PB6<PT, Output<OT, NOS>>
Set output speed
sourceimpl<PT: PullType, AFN: AltFnNum, OT: OutputType, OS: OutputSpeed> PB6<PT, AltFn<AFN, OT, OS>>
impl<PT: PullType, AFN: AltFnNum, OT: OutputType, OS: OutputSpeed> PB6<PT, AltFn<AFN, OT, OS>>
sourcepub fn output_type<NOT: OutputType>(
self,
ot: NOT
) -> PB6<PT, AltFn<AFN, NOT, OS>>
pub fn output_type<NOT: OutputType>(
self,
ot: NOT
) -> PB6<PT, AltFn<AFN, NOT, OS>>
Set output type
sourcepub fn output_speed<NOS: OutputSpeed>(
self,
os: NOS
) -> PB6<PT, AltFn<AFN, OT, NOS>>
pub fn output_speed<NOS: OutputSpeed>(
self,
os: NOS
) -> PB6<PT, AltFn<AFN, OT, NOS>>
Set output speed
Trait Implementations
sourceimpl<PT: PullType, PM: PinMode> I2cExt<I2C1, PB6<PT, PM>, PA14<PT, PM>, PB6<PT, AltFn<AF4, PushPull, HighSpeed>>, PA14<PT, AltFn<AF4, PushPull, HighSpeed>>> for I2C1
impl<PT: PullType, PM: PinMode> I2cExt<I2C1, PB6<PT, PM>, PA14<PT, PM>, PB6<PT, AltFn<AF4, PushPull, HighSpeed>>, PA14<PT, AltFn<AF4, PushPull, HighSpeed>>> for I2C1
sourceimpl<PT: PullType, PM: PinMode> I2cExt<I2C1, PB6<PT, PM>, PB7<PT, PM>, PB6<PT, AltFn<AF4, PushPull, HighSpeed>>, PB7<PT, AltFn<AF4, PushPull, HighSpeed>>> for I2C1
impl<PT: PullType, PM: PinMode> I2cExt<I2C1, PB6<PT, PM>, PB7<PT, PM>, PB6<PT, AltFn<AF4, PushPull, HighSpeed>>, PB7<PT, AltFn<AF4, PushPull, HighSpeed>>> for I2C1
sourceimpl<PT: PullType, PM: PinMode> I2cExt<I2C1, PB6<PT, PM>, PB9<PT, PM>, PB6<PT, AltFn<AF4, PushPull, HighSpeed>>, PB9<PT, AltFn<AF4, PushPull, HighSpeed>>> for I2C1
impl<PT: PullType, PM: PinMode> I2cExt<I2C1, PB6<PT, PM>, PB9<PT, PM>, PB6<PT, AltFn<AF4, PushPull, HighSpeed>>, PB9<PT, AltFn<AF4, PushPull, HighSpeed>>> for I2C1
sourceimpl<PT: PullType> InputPin for PB6<PT, Input>
impl<PT: PullType> InputPin for PB6<PT, Input>
sourceimpl<PT: PullType, OT: OutputType, OS: OutputSpeed> OutputPin for PB6<PT, Output<OT, OS>>
impl<PT: PullType, OT: OutputType, OS: OutputSpeed> OutputPin for PB6<PT, Output<OT, OS>>
sourceimpl<PT: PullType, AN: AltFnNum, OT: OutputType, OS: OutputSpeed> OutputPin for PB6<PT, AltFn<AN, OT, OS>>
impl<PT: PullType, AN: AltFnNum, OT: OutputType, OS: OutputSpeed> OutputPin for PB6<PT, AltFn<AN, OT, OS>>
sourceimpl<SP: OutputSpeed, PT: PullType, PM: PinMode, CM: ChMode> PwmExt<SP, Channel<CH1, CM>, AF2> for PB6<PT, PM>
impl<SP: OutputSpeed, PT: PullType, PM: PinMode, CM: ChMode> PwmExt<SP, Channel<CH1, CM>, AF2> for PB6<PT, PM>
sourceimpl<PT: PullType, PM: PinMode> SerialExt<USART1, PB6<PT, PM>, PA10<PT, PM>, PB6<PT, AltFn<AF7, PushPull, HighSpeed>>, PA10<PT, AltFn<AF7, PushPull, HighSpeed>>> for USART1
impl<PT: PullType, PM: PinMode> SerialExt<USART1, PB6<PT, PM>, PA10<PT, PM>, PB6<PT, AltFn<AF7, PushPull, HighSpeed>>, PA10<PT, AltFn<AF7, PushPull, HighSpeed>>> for USART1
sourceimpl<PT: PullType, PM: PinMode> SerialExt<USART1, PB6<PT, PM>, PB7<PT, PM>, PB6<PT, AltFn<AF7, PushPull, HighSpeed>>, PB7<PT, AltFn<AF7, PushPull, HighSpeed>>> for USART1
impl<PT: PullType, PM: PinMode> SerialExt<USART1, PB6<PT, PM>, PB7<PT, PM>, PB6<PT, AltFn<AF7, PushPull, HighSpeed>>, PB7<PT, AltFn<AF7, PushPull, HighSpeed>>> for USART1
sourceimpl<PT: PullType, PM: PinMode> SerialExt<USART1, PB6<PT, PM>, PC5<PT, PM>, PB6<PT, AltFn<AF7, PushPull, HighSpeed>>, PC5<PT, AltFn<AF7, PushPull, HighSpeed>>> for USART1
impl<PT: PullType, PM: PinMode> SerialExt<USART1, PB6<PT, PM>, PC5<PT, PM>, PB6<PT, AltFn<AF7, PushPull, HighSpeed>>, PC5<PT, AltFn<AF7, PushPull, HighSpeed>>> for USART1
sourceimpl<PT: PullType, PM: PinMode> SerialExt<USART1, PB6<PT, PM>, PE1<PT, PM>, PB6<PT, AltFn<AF7, PushPull, HighSpeed>>, PE1<PT, AltFn<AF7, PushPull, HighSpeed>>> for USART1
impl<PT: PullType, PM: PinMode> SerialExt<USART1, PB6<PT, PM>, PE1<PT, PM>, PB6<PT, AltFn<AF7, PushPull, HighSpeed>>, PE1<PT, AltFn<AF7, PushPull, HighSpeed>>> for USART1
sourceimpl<PT: PullType, OT: OutputType, OS: OutputSpeed> StatefulOutputPin for PB6<PT, Output<OT, OS>>
impl<PT: PullType, OT: OutputType, OS: OutputSpeed> StatefulOutputPin for PB6<PT, Output<OT, OS>>
sourcefn is_set_high(&self) -> bool
fn is_set_high(&self) -> bool
👎 Deprecated since 0.2.2:
Deprecated because the methods cannot return errors. Users should use the traits in digital::v2.
Is the pin in drive high mode? Read more
sourcefn is_set_low(&self) -> bool
fn is_set_low(&self) -> bool
👎 Deprecated since 0.2.2:
Deprecated because the methods cannot return errors. Users should use the traits in digital::v2.
Is the pin in drive low mode? Read more
impl<PT: PullType, OT: OutputType, OS: OutputSpeed> Default for PB6<PT, Output<OT, OS>>
Auto Trait Implementations
impl<PT, PM> RefUnwindSafe for PB6<PT, PM> where
PM: RefUnwindSafe,
PT: RefUnwindSafe,
impl<PT, PM> Send for PB6<PT, PM> where
PM: Send,
PT: Send,
impl<PT, PM> Sync for PB6<PT, PM> where
PM: Sync,
PT: Sync,
impl<PT, PM> Unpin for PB6<PT, PM> where
PM: Unpin,
PT: Unpin,
impl<PT, PM> UnwindSafe for PB6<PT, PM> where
PM: UnwindSafe,
PT: UnwindSafe,
Blanket Implementations
sourceimpl<T> BorrowMut<T> for T where
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
const: unstable · sourcefn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more