Struct alt_stm32f30x_hal::gpio::PB10
source · [−]Expand description
Pin
Implementations
sourceimpl<PT: PullType, PM: PinMode> PB10<PT, PM>
impl<PT: PullType, PM: PinMode> PB10<PT, PM>
sourcepub fn downgrade(self) -> PBx<PT, PM>
pub fn downgrade(self) -> PBx<PT, PM>
Erases the pin number from the type
This is useful when you want to collect the pins into an array where you need all the elements to have the same type
sourceimpl<PT: PullType, OT: OutputType, OS: OutputSpeed> PB10<PT, Output<OT, OS>>
impl<PT: PullType, OT: OutputType, OS: OutputSpeed> PB10<PT, Output<OT, OS>>
sourcepub fn output_type<NOT: OutputType>(self, ot: NOT) -> PB10<PT, Output<NOT, OS>>
pub fn output_type<NOT: OutputType>(self, ot: NOT) -> PB10<PT, Output<NOT, OS>>
Set output type
sourcepub fn open_drain(self) -> PB10<PT, Output<OpenDrain, OS>>
pub fn open_drain(self) -> PB10<PT, Output<OpenDrain, OS>>
Set output type to OpenDrain
sourcepub fn output_speed<NOS: OutputSpeed>(
self,
os: NOS
) -> PB10<PT, Output<OT, NOS>>
pub fn output_speed<NOS: OutputSpeed>(
self,
os: NOS
) -> PB10<PT, Output<OT, NOS>>
Set output speed
sourceimpl<PT: PullType, AFN: AltFnNum, OT: OutputType, OS: OutputSpeed> PB10<PT, AltFn<AFN, OT, OS>>
impl<PT: PullType, AFN: AltFnNum, OT: OutputType, OS: OutputSpeed> PB10<PT, AltFn<AFN, OT, OS>>
sourcepub fn output_type<NOT: OutputType>(
self,
ot: NOT
) -> PB10<PT, AltFn<AFN, NOT, OS>>
pub fn output_type<NOT: OutputType>(
self,
ot: NOT
) -> PB10<PT, AltFn<AFN, NOT, OS>>
Set output type
sourcepub fn output_speed<NOS: OutputSpeed>(
self,
os: NOS
) -> PB10<PT, AltFn<AFN, OT, NOS>>
pub fn output_speed<NOS: OutputSpeed>(
self,
os: NOS
) -> PB10<PT, AltFn<AFN, OT, NOS>>
Set output speed
Trait Implementations
sourceimpl<PT: PullType> InputPin for PB10<PT, Input>
impl<PT: PullType> InputPin for PB10<PT, Input>
sourceimpl<PT: PullType, OT: OutputType, OS: OutputSpeed> OutputPin for PB10<PT, Output<OT, OS>>
impl<PT: PullType, OT: OutputType, OS: OutputSpeed> OutputPin for PB10<PT, Output<OT, OS>>
sourceimpl<PT: PullType, AN: AltFnNum, OT: OutputType, OS: OutputSpeed> OutputPin for PB10<PT, AltFn<AN, OT, OS>>
impl<PT: PullType, AN: AltFnNum, OT: OutputType, OS: OutputSpeed> OutputPin for PB10<PT, AltFn<AN, OT, OS>>
sourceimpl<PT: PullType, PM: PinMode> SerialExt<USART3, PB10<PT, PM>, PB11<PT, PM>, PB10<PT, AltFn<AF7, PushPull, HighSpeed>>, PB11<PT, AltFn<AF7, PushPull, HighSpeed>>> for USART3
impl<PT: PullType, PM: PinMode> SerialExt<USART3, PB10<PT, PM>, PB11<PT, PM>, PB10<PT, AltFn<AF7, PushPull, HighSpeed>>, PB11<PT, AltFn<AF7, PushPull, HighSpeed>>> for USART3
sourceimpl<PT: PullType, PM: PinMode> SerialExt<USART3, PB10<PT, PM>, PC11<PT, PM>, PB10<PT, AltFn<AF7, PushPull, HighSpeed>>, PC11<PT, AltFn<AF7, PushPull, HighSpeed>>> for USART3
impl<PT: PullType, PM: PinMode> SerialExt<USART3, PB10<PT, PM>, PC11<PT, PM>, PB10<PT, AltFn<AF7, PushPull, HighSpeed>>, PC11<PT, AltFn<AF7, PushPull, HighSpeed>>> for USART3
sourceimpl<PT: PullType, PM: PinMode> SerialExt<USART3, PB10<PT, PM>, PD9<PT, PM>, PB10<PT, AltFn<AF7, PushPull, HighSpeed>>, PD9<PT, AltFn<AF7, PushPull, HighSpeed>>> for USART3
impl<PT: PullType, PM: PinMode> SerialExt<USART3, PB10<PT, PM>, PD9<PT, PM>, PB10<PT, AltFn<AF7, PushPull, HighSpeed>>, PD9<PT, AltFn<AF7, PushPull, HighSpeed>>> for USART3
sourceimpl<PT: PullType, PM: PinMode> SerialExt<USART3, PB10<PT, PM>, PE15<PT, PM>, PB10<PT, AltFn<AF7, PushPull, HighSpeed>>, PE15<PT, AltFn<AF7, PushPull, HighSpeed>>> for USART3
impl<PT: PullType, PM: PinMode> SerialExt<USART3, PB10<PT, PM>, PE15<PT, PM>, PB10<PT, AltFn<AF7, PushPull, HighSpeed>>, PE15<PT, AltFn<AF7, PushPull, HighSpeed>>> for USART3
sourceimpl<PT: PullType, OT: OutputType, OS: OutputSpeed> StatefulOutputPin for PB10<PT, Output<OT, OS>>
impl<PT: PullType, OT: OutputType, OS: OutputSpeed> StatefulOutputPin for PB10<PT, Output<OT, OS>>
sourcefn is_set_high(&self) -> bool
fn is_set_high(&self) -> bool
👎 Deprecated since 0.2.2:
Deprecated because the methods cannot return errors. Users should use the traits in digital::v2.
Is the pin in drive high mode? Read more
sourcefn is_set_low(&self) -> bool
fn is_set_low(&self) -> bool
👎 Deprecated since 0.2.2:
Deprecated because the methods cannot return errors. Users should use the traits in digital::v2.
Is the pin in drive low mode? Read more
impl<PT: PullType, OT: OutputType, OS: OutputSpeed> Default for PB10<PT, Output<OT, OS>>
Auto Trait Implementations
impl<PT, PM> RefUnwindSafe for PB10<PT, PM> where
PM: RefUnwindSafe,
PT: RefUnwindSafe,
impl<PT, PM> Send for PB10<PT, PM> where
PM: Send,
PT: Send,
impl<PT, PM> Sync for PB10<PT, PM> where
PM: Sync,
PT: Sync,
impl<PT, PM> Unpin for PB10<PT, PM> where
PM: Unpin,
PT: Unpin,
impl<PT, PM> UnwindSafe for PB10<PT, PM> where
PM: UnwindSafe,
PT: UnwindSafe,
Blanket Implementations
sourceimpl<T> BorrowMut<T> for T where
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
const: unstable · sourcefn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more