[−][src]Struct alt_stm32f30x_hal::device::rtc::tafcr::W
Value to write to the register
Methods
impl W
[src]
pub fn reset_value() -> W
[src]
Reset value of the register
pub unsafe fn bits(&mut self, bits: u32) -> &mut W
[src]
Writes raw bits to the register
pub fn tamp1e(&mut self) -> _TAMP1EW
[src]
Bit 0 - Tamper 1 detection enable
pub fn tamp1trg(&mut self) -> _TAMP1TRGW
[src]
Bit 1 - Active level for tamper 1
pub fn tampie(&mut self) -> _TAMPIEW
[src]
Bit 2 - Tamper interrupt enable
pub fn tamp2e(&mut self) -> _TAMP2EW
[src]
Bit 3 - Tamper 2 detection enable
pub fn tamp2trg(&mut self) -> _TAMP2TRGW
[src]
Bit 4 - Active level for tamper 2
pub fn tamp3e(&mut self) -> _TAMP3EW
[src]
Bit 5 - Tamper 3 detection enable
pub fn tamp3trg(&mut self) -> _TAMP3TRGW
[src]
Bit 6 - Active level for tamper 3
pub fn tampts(&mut self) -> _TAMPTSW
[src]
Bit 7 - Activate timestamp on tamper detection event
pub fn tampfreq(&mut self) -> _TAMPFREQW
[src]
Bits 8:10 - Tamper sampling frequency
pub fn tampflt(&mut self) -> _TAMPFLTW
[src]
Bits 11:12 - Tamper filter count
pub fn tampprch(&mut self) -> _TAMPPRCHW
[src]
Bits 13:14 - Tamper precharge duration
pub fn tamppudis(&mut self) -> _TAMPPUDISW
[src]
Bit 15 - TAMPER pull-up disable
pub fn pc13value(&mut self) -> _PC13VALUEW
[src]
Bit 18 - PC13 value
pub fn pc13mode(&mut self) -> _PC13MODEW
[src]
Bit 19 - PC13 mode
pub fn pc14value(&mut self) -> _PC14VALUEW
[src]
Bit 20 - PC14 value
pub fn pc14mode(&mut self) -> _PC14MODEW
[src]
Bit 21 - PC 14 mode
pub fn pc15value(&mut self) -> _PC15VALUEW
[src]
Bit 22 - PC15 value
pub fn pc15mode(&mut self) -> _PC15MODEW
[src]
Bit 23 - PC15 mode
Auto Trait Implementations
Blanket Implementations
impl<T, U> TryFrom<U> for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T, U> Into<U> for T where
U: From<T>,
[src]
U: From<T>,
impl<T> From<T> for T
[src]
impl<T, U> TryInto<U> for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
impl<T> Borrow<T> for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
[src]
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,
impl<T> Same<T> for T
type Output = T
Should always be Self