[−][src]Struct alt_stm32f30x_hal::device::rtc::cr::W
Value to write to the register
Methods
impl W
[src]
pub fn reset_value() -> W
[src]
Reset value of the register
pub unsafe fn bits(&mut self, bits: u32) -> &mut W
[src]
Writes raw bits to the register
pub fn wcksel(&mut self) -> _WCKSELW
[src]
Bits 0:2 - Wakeup clock selection
pub fn tsedge(&mut self) -> _TSEDGEW
[src]
Bit 3 - Time-stamp event active edge
pub fn refckon(&mut self) -> _REFCKONW
[src]
Bit 4 - Reference clock detection enable (50 or 60 Hz)
pub fn bypshad(&mut self) -> _BYPSHADW
[src]
Bit 5 - Bypass the shadow registers
pub fn fmt(&mut self) -> _FMTW
[src]
Bit 6 - Hour format
pub fn alrae(&mut self) -> _ALRAEW
[src]
Bit 8 - Alarm A enable
pub fn alrbe(&mut self) -> _ALRBEW
[src]
Bit 9 - Alarm B enable
pub fn wute(&mut self) -> _WUTEW
[src]
Bit 10 - Wakeup timer enable
pub fn tse(&mut self) -> _TSEW
[src]
Bit 11 - Time stamp enable
pub fn alraie(&mut self) -> _ALRAIEW
[src]
Bit 12 - Alarm A interrupt enable
pub fn alrbie(&mut self) -> _ALRBIEW
[src]
Bit 13 - Alarm B interrupt enable
pub fn wutie(&mut self) -> _WUTIEW
[src]
Bit 14 - Wakeup timer interrupt enable
pub fn tsie(&mut self) -> _TSIEW
[src]
Bit 15 - Time-stamp interrupt enable
pub fn add1h(&mut self) -> _ADD1HW
[src]
Bit 16 - Add 1 hour (summer time change)
pub fn sub1h(&mut self) -> _SUB1HW
[src]
Bit 17 - Subtract 1 hour (winter time change)
pub fn bkp(&mut self) -> _BKPW
[src]
Bit 18 - Backup
pub fn cosel(&mut self) -> _COSELW
[src]
Bit 19 - Calibration output selection
pub fn pol(&mut self) -> _POLW
[src]
Bit 20 - Output polarity
pub fn osel(&mut self) -> _OSELW
[src]
Bits 21:22 - Output selection
pub fn coe(&mut self) -> _COEW
[src]
Bit 23 - Calibration output enable
Auto Trait Implementations
Blanket Implementations
impl<T, U> TryFrom<U> for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T, U> Into<U> for T where
U: From<T>,
[src]
U: From<T>,
impl<T> From<T> for T
[src]
impl<T, U> TryInto<U> for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
impl<T> Borrow<T> for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
[src]
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,
impl<T> Same<T> for T
type Output = T
Should always be Self