[−][src]Struct alt_stm32f30x_hal::device::i2c1::isr::R
Value read from the register
Methods
impl R
[src]
pub fn bits(&self) -> u32
[src]
Value of the register as raw bits
pub fn addcode(&self) -> ADDCODER
[src]
Bits 17:23 - Address match code (Slave mode)
pub fn dir(&self) -> DIRR
[src]
Bit 16 - Transfer direction (Slave mode)
pub fn busy(&self) -> BUSYR
[src]
Bit 15 - Bus busy
pub fn alert(&self) -> ALERTR
[src]
Bit 13 - SMBus alert
pub fn timeout(&self) -> TIMEOUTR
[src]
Bit 12 - Timeout or t_low detection flag
pub fn pecerr(&self) -> PECERRR
[src]
Bit 11 - PEC Error in reception
pub fn ovr(&self) -> OVRR
[src]
Bit 10 - Overrun/Underrun (slave mode)
pub fn arlo(&self) -> ARLOR
[src]
Bit 9 - Arbitration lost
pub fn berr(&self) -> BERRR
[src]
Bit 8 - Bus error
pub fn tcr(&self) -> TCRR
[src]
Bit 7 - Transfer Complete Reload
pub fn tc(&self) -> TCR
[src]
Bit 6 - Transfer Complete (master mode)
pub fn stopf(&self) -> STOPFR
[src]
Bit 5 - Stop detection flag
pub fn nackf(&self) -> NACKFR
[src]
Bit 4 - Not acknowledge received flag
pub fn addr(&self) -> ADDRR
[src]
Bit 3 - Address matched (slave mode)
pub fn rxne(&self) -> RXNER
[src]
Bit 2 - Receive data register not empty (receivers)
pub fn txis(&self) -> TXISR
[src]
Bit 1 - Transmit interrupt status (transmitters)
pub fn txe(&self) -> TXER
[src]
Bit 0 - Transmit data register empty (transmitters)
Auto Trait Implementations
Blanket Implementations
impl<T, U> TryFrom<U> for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T, U> Into<U> for T where
U: From<T>,
[src]
U: From<T>,
impl<T> From<T> for T
[src]
impl<T, U> TryInto<U> for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
impl<T> Borrow<T> for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
[src]
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,
impl<T> Same<T> for T
type Output = T
Should always be Self