Expand description
ad9361
: Bindings to the AD9361 part of the Analog Devices Inc. no-OS
library.
Usage
use ad9361_rs::{Ad9361, Ad9361InitParam};
use embedded_hal::blocking::spi::Transfer;
use embedded_hal::digital::v2::OutputPin;
use embedded_hal::blocking::delay::{DelayMs, DelayUs};
fn example(spi: impl Transfer<u8>,
delay: impl DelayMs<u32> + DelayUs<u32>,
reset_n: impl OutputPin)
{
let parameters: Ad9361InitParam = Default::default();
let heap = Vec::with_capacity(540);
let mut ad9361 = Ad9361::new(spi, delay, Some(reset_n), heap); // ad9361 must not be moved after this point
ad9361.init(parameters).unwrap();
let _temperature = ad9361.get_temperature().unwrap();
}
#[no_std]
To use the crate in a no-std enviroment, specify default-features = false
in Cargo.toml. You will then need to specify one of the supported device features.
ad9361_device
ad9364_device
ad9363a_device
ad9361-rs = { default-features = false, features = ["ad9364_device"] }
The build process for this crate requires a C compiler. When cross-compiling, you will need to make sure you have a suitable compiler installed. If necessary the cc crate supports external configuration via enviroment variables
Structs
An AD9361 RF PHY
Parameters used to configure the AD9361 RF PHY
Parameters used to configure the Rx FIR filter
Parameters used to configure the Tx FIR filter
Enums
Built-In Self Test (BIST) mode
Enable State Machine (ENSM) state.
Internal / External LO selection
Tx Local Oscillator power down
Loopback mode. When enabled, loopback (AD9361 internal) TX->RX
RF Gain Control Mode
RX RF Port Selection
TX RF Port Selection