Trait actix::prelude::Stream[][src]

#[must_use = "streams do nothing unless polled"]pub trait Stream {
    type Item;
    pub fn poll_next(
        self: Pin<&mut Self>,
        cx: &mut Context<'_>
    ) -> Poll<Option<Self::Item>>; pub fn size_hint(&self) -> (usize, Option<usize>) { ... } }

A stream of values produced asynchronously.

If Future<Output = T> is an asynchronous version of T, then Stream<Item = T> is an asynchronous version of Iterator<Item = T>. A stream represents a sequence of value-producing events that occur asynchronously to the caller.

The trait is modeled after Future, but allows poll_next to be called even after a value has been produced, yielding None once the stream has been fully exhausted.

Associated Types

type Item[src]

Values yielded by the stream.

Loading content...

Required methods

pub fn poll_next(
    self: Pin<&mut Self>,
    cx: &mut Context<'_>
) -> Poll<Option<Self::Item>>
[src]

Attempt to pull out the next value of this stream, registering the current task for wakeup if the value is not yet available, and returning None if the stream is exhausted.

Return value

There are several possible return values, each indicating a distinct stream state:

  • Poll::Pending means that this stream’s next value is not ready yet. Implementations will ensure that the current task will be notified when the next value may be ready.

  • Poll::Ready(Some(val)) means that the stream has successfully produced a value, val, and may produce further values on subsequent poll_next calls.

  • Poll::Ready(None) means that the stream has terminated, and poll_next should not be invoked again.

Panics

Once a stream has finished (returned Ready(None) from poll_next), calling its poll_next method again may panic, block forever, or cause other kinds of problems; the Stream trait places no requirements on the effects of such a call. However, as the poll_next method is not marked unsafe, Rust’s usual rules apply: calls must never cause undefined behavior (memory corruption, incorrect use of unsafe functions, or the like), regardless of the stream’s state.

If this is difficult to guard against then the fuse adapter can be used to ensure that poll_next always returns Ready(None) in subsequent calls.

Loading content...

Provided methods

pub fn size_hint(&self) -> (usize, Option<usize>)[src]

Returns the bounds on the remaining length of the stream.

Specifically, size_hint() returns a tuple where the first element is the lower bound, and the second element is the upper bound.

The second half of the tuple that is returned is an Option<usize>. A None here means that either there is no known upper bound, or the upper bound is larger than usize.

Implementation notes

It is not enforced that a stream implementation yields the declared number of elements. A buggy stream may yield less than the lower bound or more than the upper bound of elements.

size_hint() is primarily intended to be used for optimizations such as reserving space for the elements of the stream, but must not be trusted to e.g., omit bounds checks in unsafe code. An incorrect implementation of size_hint() should not lead to memory safety violations.

That said, the implementation should provide a correct estimation, because otherwise it would be a violation of the trait’s protocol.

The default implementation returns (0, None) which is correct for any stream.

Loading content...

Implementations on Foreign Types

impl<S> Stream for Box<S, Global> where
    S: Stream + Unpin + ?Sized
[src]

type Item = <S as Stream>::Item

impl<'_, S> Stream for &'_ mut S where
    S: Stream + Unpin + ?Sized
[src]

type Item = <S as Stream>::Item

impl<P> Stream for Pin<P> where
    P: DerefMut + Unpin,
    <P as Deref>::Target: Stream
[src]

type Item = <<P as Deref>::Target as Stream>::Item

impl<S> Stream for AssertUnwindSafe<S> where
    S: Stream
[src]

type Item = <S as Stream>::Item

impl<I> Stream for Iter<I> where
    I: Iterator
[src]

type Item = <I as Iterator>::Item

impl<St1, St2> Stream for Chain<St1, St2> where
    St1: Stream,
    St2: Stream<Item = <St1 as Stream>::Item>, 
[src]

type Item = <St1 as Stream>::Item

impl<St, F> Stream for Inspect<St, F> where
    Map<St, InspectFn<F>>: Stream
[src]

type Item = <Map<St, InspectFn<F>> as Stream>::Item

impl<St, Fut> Stream for TakeUntil<St, Fut> where
    Fut: Future,
    St: Stream
[src]

type Item = <St as Stream>::Item

impl<St> Stream for TryFlatten<St> where
    St: TryStream,
    <St as TryStream>::Ok: TryStream,
    <<St as TryStream>::Ok as TryStream>::Error: From<<St as TryStream>::Error>, 
[src]

type Item = Result<<<St as TryStream>::Ok as TryStream>::Ok, <<St as TryStream>::Ok as TryStream>::Error>

impl<Fut> Stream for Once<Fut> where
    Fut: Future
[src]

type Item = <Fut as Future>::Output

impl<B, St, S, Fut, F> Stream for Scan<St, S, Fut, F> where
    F: FnMut(&mut S, <St as Stream>::Item) -> Fut,
    Fut: Future<Output = Option<B>>,
    St: Stream
[src]

type Item = B

impl<T> Stream for Empty<T>[src]

type Item = T

impl<St, F> Stream for InspectOk<St, F> where
    Inspect<IntoStream<St>, InspectOkFn<F>>: Stream
[src]

type Item = <Inspect<IntoStream<St>, InspectOkFn<F>> as Stream>::Item

impl<F> Stream for FlattenStream<F> where
    F: Future,
    Flatten<F, <F as Future>::Output>: Stream
[src]

type Item = <Flatten<F, <F as Future>::Output> as Stream>::Item

impl<St, Fut, F, T> Stream for FilterMap<St, Fut, F> where
    F: FnMut1<<St as Stream>::Item, Output = Fut>,
    Fut: Future<Output = Option<T>>,
    St: Stream
[src]

type Item = T

impl<St, Fut, F> Stream for SkipWhile<St, Fut, F> where
    F: FnMut(&<St as Stream>::Item) -> Fut,
    Fut: Future<Output = bool>,
    St: Stream
[src]

type Item = <St as Stream>::Item

impl<S> Stream for Fuse<S> where
    S: Stream
[src]

type Item = <S as Stream>::Item

impl<St1, St2> Stream for Select<St1, St2> where
    St1: Stream,
    St2: Stream<Item = <St1 as Stream>::Item>, 
[src]

type Item = <St1 as Stream>::Item

impl<St, Fut, F> Stream for Filter<St, Fut, F> where
    F: for<'a> FnMut1<&'a <St as Stream>::Item, Output = Fut>,
    Fut: Future<Output = bool>,
    St: Stream
[src]

type Item = <St as Stream>::Item

impl<St1, St2> Stream for Zip<St1, St2> where
    St1: Stream,
    St2: Stream
[src]

type Item = (<St1 as Stream>::Item, <St2 as Stream>::Item)

impl<St, F> Stream for MapOk<St, F> where
    Map<IntoStream<St>, MapOkFn<F>>: Stream
[src]

type Item = <Map<IntoStream<St>, MapOkFn<F>> as Stream>::Item

impl<St, Fut, F> Stream for TryTakeWhile<St, Fut, F> where
    F: FnMut(&<St as TryStream>::Ok) -> Fut,
    Fut: TryFuture<Ok = bool, Error = <St as TryStream>::Error>,
    St: TryStream
[src]

type Item = Result<<St as TryStream>::Ok, <St as TryStream>::Error>

impl<St, F> Stream for MapErr<St, F> where
    Map<IntoStream<St>, MapErrFn<F>>: Stream
[src]

type Item = <Map<IntoStream<St>, MapErrFn<F>> as Stream>::Item

impl<St, E> Stream for ErrInto<St, E> where
    MapErr<St, IntoFn<E>>: Stream
[src]

type Item = <MapErr<St, IntoFn<E>> as Stream>::Item

impl<St, Fut, F> Stream for TryFilter<St, Fut, F> where
    F: FnMut(&<St as TryStream>::Ok) -> Fut,
    Fut: Future<Output = bool>,
    St: TryStream
[src]

type Item = Result<<St as TryStream>::Ok, <St as TryStream>::Error>

impl<St> Stream for Cycle<St> where
    St: Clone + Stream
[src]

type Item = <St as Stream>::Item

impl<St> Stream for IntoStream<St> where
    St: TryStream
[src]

type Item = Result<<St as TryStream>::Ok, <St as TryStream>::Error>

impl<St, U, F> Stream for FlatMap<St, U, F> where
    Flatten<Map<St, F>, U>: Stream
[src]

type Item = <Flatten<Map<St, F>, U> as Stream>::Item

impl<St, Fut, F, T> Stream for TryFilterMap<St, Fut, F> where
    F: FnMut(<St as TryStream>::Ok) -> Fut,
    Fut: TryFuture<Ok = Option<T>, Error = <St as TryStream>::Error>,
    St: TryStream
[src]

type Item = Result<T, <St as TryStream>::Error>

impl<St, Fut, F> Stream for TakeWhile<St, Fut, F> where
    F: FnMut(&<St as Stream>::Item) -> Fut,
    Fut: Future<Output = bool>,
    St: Stream
[src]

type Item = <St as Stream>::Item

impl<St, Fut, F> Stream for AndThen<St, Fut, F> where
    F: FnMut(<St as TryStream>::Ok) -> Fut,
    Fut: TryFuture<Error = <St as TryStream>::Error>,
    St: TryStream
[src]

type Item = Result<<Fut as TryFuture>::Ok, <St as TryStream>::Error>

impl<F> Stream for IntoStream<F> where
    Once<F>: Stream
[src]

type Item = <Once<F> as Stream>::Item

impl<St> Stream for Flatten<St> where
    St: Stream,
    Flatten<St, <St as Stream>::Item>: Stream
[src]

type Item = <Flatten<St, <St as Stream>::Item> as Stream>::Item

impl<St> Stream for Take<St> where
    St: Stream
[src]

type Item = <St as Stream>::Item

impl<T, F, Fut, Item> Stream for Unfold<T, F, Fut> where
    F: FnMut(T) -> Fut,
    Fut: Future<Output = Option<(Item, T)>>, 
[src]

type Item = Item

impl<T, F, Fut, Item> Stream for TryUnfold<T, F, Fut> where
    F: FnMut(T) -> Fut,
    Fut: TryFuture<Ok = Option<(Item, T)>>, 
[src]

type Item = Result<Item, <Fut as TryFuture>::Error>

impl<A, F> Stream for RepeatWith<F> where
    F: FnMut() -> A, 
[src]

type Item = A

impl<St, Fut, F> Stream for OrElse<St, Fut, F> where
    F: FnMut(<St as TryStream>::Error) -> Fut,
    Fut: TryFuture<Ok = <St as TryStream>::Ok>,
    St: TryStream
[src]

type Item = Result<<St as TryStream>::Ok, <Fut as TryFuture>::Error>

impl<St, F> Stream for Map<St, F> where
    F: FnMut1<<St as Stream>::Item>,
    St: Stream
[src]

type Item = <F as FnOnce1<<St as Stream>::Item>>::Output

impl<T> Stream for Repeat<T> where
    T: Clone
[src]

type Item = T

impl<St> Stream for Enumerate<St> where
    St: Stream
[src]

type Item = (usize, <St as Stream>::Item)

impl<St, Fut, F> Stream for Then<St, Fut, F> where
    F: FnMut(<St as Stream>::Item) -> Fut,
    Fut: Future,
    St: Stream
[src]

type Item = <Fut as Future>::Output

impl<S> Stream for Peekable<S> where
    S: Stream
[src]

type Item = <S as Stream>::Item

impl<T, F> Stream for PollFn<F> where
    F: FnMut(&mut Context<'_>) -> Poll<Option<T>>, 
[src]

type Item = T

impl<St> Stream for Skip<St> where
    St: Stream
[src]

type Item = <St as Stream>::Item

impl<A, B> Stream for Either<A, B> where
    A: Stream,
    B: Stream<Item = <A as Stream>::Item>, 
[src]

type Item = <A as Stream>::Item

impl<T> Stream for Pending<T>[src]

type Item = T

impl<St, F> Stream for InspectErr<St, F> where
    Inspect<IntoStream<St>, InspectErrFn<F>>: Stream
[src]

type Item = <Inspect<IntoStream<St>, InspectErrFn<F>> as Stream>::Item

impl<Fut> Stream for TryFlattenStream<Fut> where
    Fut: TryFuture,
    TryFlatten<Fut, <Fut as TryFuture>::Ok>: Stream
[src]

type Item = <TryFlatten<Fut, <Fut as TryFuture>::Ok> as Stream>::Item

impl<St, Fut, F> Stream for TrySkipWhile<St, Fut, F> where
    F: FnMut(&<St as TryStream>::Ok) -> Fut,
    Fut: TryFuture<Ok = bool, Error = <St as TryStream>::Error>,
    St: TryStream
[src]

type Item = Result<<St as TryStream>::Ok, <St as TryStream>::Error>

impl Stream for PollSemaphore[src]

type Item = OwnedSemaphorePermit

impl<T, D> Stream for FramedWrite<T, D> where
    T: Stream
[src]

type Item = <T as Stream>::Item

impl<L, R> Stream for Either<L, R> where
    R: Stream<Item = <L as Stream>::Item>,
    L: Stream
[src]

type Item = <L as Stream>::Item

impl<T, D> Stream for FramedRead<T, D> where
    T: AsyncRead,
    D: Decoder
[src]

type Item = Result<<D as Decoder>::Item, <D as Decoder>::Error>

impl<T, U> Stream for Framed<T, U> where
    T: AsyncRead,
    U: Decoder
[src]

type Item = Result<<U as Decoder>::Item, <U as Decoder>::Error>

Loading content...

Implementors

impl<A: Actor> Stream for AddressReceiver<A>[src]

type Item = Envelope<A>

Loading content...