brep_kernel/intersect/

surface_surface_intersection.rs

use crate::curve::interior_knot_count;
use crate::fit::solve_small;
use crate::projection::project_point_to_surface_from_seed;
use crate::{project_point_to_surface, KnotVector, NurbsSurface, Vec3};
use serde::{Deserialize, Serialize};

const EPSILON: f64 = crate::tolerance::FP_FLOOR;
const LINEAR_TOLERANCE: f64 = crate::tolerance::DEFAULT_MODEL;

/// Minimum `|n_a × n_b|` at a start point for a trace to begin there — the
/// gate `intersect_surfaces` applies to explicit seeds and grid starts alike,
/// and `intersect_surfaces_supplemental` to its own seeds.
///
/// Below it the carriers are tangent there to working precision, so the point
/// sits in a tangency BAND — the set of points within the coincidence
/// tolerance of both surfaces, about `√(2·R·tol)` wide across a contact of
/// curvature radius `R` — rather than on a transverse curve.  A trace started
/// inside the band walks the band's noise: it neither closes nor reaches a
/// boundary and exhausts its step budget (a corner blend's sphere kissing a
/// mirrored copy's face plane at one point; the same sphere inscribed in its
/// own fillet cylinder, kissing it along a circle).  Shared topology at a
/// tangential contact comes from imprint's boundary-curve exchange, never
/// from marching ("similar faces we do not intersect" — Golovanov §6.2).
const TRANSVERSE_START_CROSS: f64 = 1e-2;

/// [`TRANSVERSE_START_CROSS`] under its crate-wide name: the bound at which a
/// contact stops being a graze and becomes a crossing. `csg::imprint`'s
/// tangential-only gate asks the same question of a marched point, and must ask
/// it with the same number the seeds were accepted by.
pub(crate) const TRANSVERSE_SEED_CROSS: f64 = TRANSVERSE_START_CROSS;

/// How much CURVE a trace must be able to reach, as a multiple of the
/// carriers' shared extent, whatever step ceiling the caller asked for.
///
/// `maximum_steps` bounds corrector CALLS; multiplied by the ceiling in force
/// it bounds the ARC a trace can reach, and that product is the only thing
/// that decides whether an ordinary section is reachable at all.  At the
/// marcher's own ceiling (`diagonal / 15`) the default budget reaches 266
/// extents — no bound in practice.  A caller that asks for a FINER ceiling is
/// asking for RESOLUTION, and its request silently shortened the reach in the
/// same proportion: `offset_shell`'s `0.0005 · scale` leaves 2.0 extents, less
/// than one turn of an ordinary closed section on a part that size, so a
/// perfectly marched circle died at 4000 steps (2026-09-13: the apex-cone
/// carrier against its base plane — 42.714 of curve against a 28.844 reach,
/// every step at the cap, the §4.12 curvature budget permitting 113× more).
///
/// That is the 2026-08-06 rule one level up: what a marcher can reach must be
/// a fixed fraction of the MODEL, never a function of the step the caller
/// asked for.  So the ceiling is honoured as resolution and the step COUNT is
/// derived from it — the trace takes however many steps this much curve needs.
/// Nothing that completes today changes by a single step: the derived count
/// only ever exceeds the caller's own, and only on the fine-ceiling lane.
///
/// It is a FLOOR on the reach, not a bound on how long a section may be — the
/// default lane keeps its 266 extents.  Sized for the fine-ceiling lane alone,
/// where the longest section measured over the kernel's 37 631 traces is 1.76
/// extents (the 2026-09-13 census; 4.43 is the most any capped ceiling reached
/// before this and 0.13 the least).
const MARCH_REACH_EXTENTS: f64 = 4.0;

/// Corrector calls a trace may spend: the caller's own budget, or however many
/// [`MARCH_REACH_EXTENTS`] of curve need at `maximum_step`, whichever is more.
fn step_budget(maximum_steps: usize, maximum_step: f64, diagonal: f64) -> usize {
    if !(maximum_step > 0.0) || !diagonal.is_finite() {
        return maximum_steps;
    }
    let needed = (MARCH_REACH_EXTENTS * diagonal / maximum_step).ceil();
    if !needed.is_finite() || needed <= maximum_steps as f64 {
        return maximum_steps;
    }
    needed as usize
}

use crate::spatial::Aabb as Bounds;


#[derive(Clone, Copy)]
struct SurfaceInfo<'a> {
    surface: &'a NurbsSurface,
    u0: f64,
    u1: f64,
    v0: f64,
    v1: f64,
    closed_u: bool,
    closed_v: bool,
}

fn surface_info(surface: &NurbsSurface) -> Result<SurfaceInfo<'_>, String> {
    let ku = KnotVector::new(surface.knots_u.clone(), surface.degree_u)?;
    let kv = KnotVector::new(surface.knots_v.clone(), surface.degree_v)?;
    let [u0, u1] = ku.domain();
    let [v0, v1] = kv.domain();
    let mut closed_u = true;
    let mut closed_v = true;
    for fraction in [0.17, 0.5, 0.83] {
        let v = v0 + (v1 - v0) * fraction;
        if surface
            .evaluate(u0, v)?
            .sub(surface.evaluate(u1, v)?)
            .length()
            > LINEAR_TOLERANCE * 10.0
        {
            closed_u = false;
        }
        let u = u0 + (u1 - u0) * fraction;
        if surface
            .evaluate(u, v0)?
            .sub(surface.evaluate(u, v1)?)
            .length()
            > LINEAR_TOLERANCE * 10.0
        {
            closed_v = false;
        }
    }
    Ok(SurfaceInfo {
        surface,
        u0,
        u1,
        v0,
        v1,
        closed_u,
        closed_v,
    })
}

fn fit(value: f64, minimum: f64, maximum: f64, closed: bool) -> f64 {
    crate::projection::fit_parameter(value, minimum, maximum, closed)
}


#[derive(Clone, Copy)]
struct IntersectionPoint {
    ua: f64,
    va: f64,
    ub: f64,
    vb: f64,
    point: Vec3,
}

fn refine_point(
    first: SurfaceInfo<'_>,
    second: SurfaceInfo<'_>,
    mut ua: f64,
    mut va: f64,
    mut ub: f64,
    mut vb: f64,
    tolerance: f64,
) -> Result<Option<IntersectionPoint>, String> {
    for _ in 0..40 {
        let da = first.surface.derivatives(ua, va, 1)?;
        let db = second.surface.derivatives(ub, vb, 1)?;
        let residual = da[0][0].sub(db[0][0]);
        if residual.length() <= tolerance * 0.01 + EPSILON {
            return Ok(Some(IntersectionPoint {
                ua,
                va,
                ub,
                vb,
                point: da[0][0].add(db[0][0]).scale(0.5),
            }));
        }
        let columns = [
            da[1][0],
            da[0][1],
            db[1][0].scale(-1.0),
            db[0][1].scale(-1.0),
        ];
        let mut matrix = [[0.0f64; 3]; 3];
        for column in columns {
            let values = [column.x, column.y, column.z];
            for row in 0..3 {
                for col in 0..3 {
                    matrix[row][col] += values[row] * values[col];
                }
            }
        }
        let lambda = match solve_small(matrix, [-residual.x, -residual.y, -residual.z], 3) {
            Ok(value) => value,
            Err(_) => return Ok(None),
        };
        let multiplier = Vec3::new(lambda[0], lambda[1], lambda[2]);
        let mut changes = columns.map(|column| column.dot(multiplier));
        let domains = [
            first.u1 - first.u0,
            first.v1 - first.v0,
            second.u1 - second.u0,
            second.v1 - second.v0,
        ];
        for index in 0..4 {
            changes[index] = changes[index].clamp(-domains[index] / 4.0, domains[index] / 4.0);
        }
        ua = fit(ua + changes[0], first.u0, first.u1, first.closed_u);
        va = fit(va + changes[1], first.v0, first.v1, first.closed_v);
        ub = fit(ub + changes[2], second.u0, second.u1, second.closed_u);
        vb = fit(vb + changes[3], second.v0, second.v1, second.closed_v);
    }
    let a = first.surface.evaluate(ua, va)?;
    let b = second.surface.evaluate(ub, vb)?;
    if a.sub(b).length() <= tolerance {
        Ok(Some(IntersectionPoint {
            ua,
            va,
            ub,
            vb,
            point: a.add(b).scale(0.5),
        }))
    } else {
        Ok(None)
    }
}

fn find_start_points(
    first: SurfaceInfo<'_>,
    second: SurfaceInfo<'_>,
    tolerance: f64,
    density: f64,
) -> Result<Vec<IntersectionPoint>, String> {
    let grid_count = |info: SurfaceInfo<'_>, direction_u: bool| {
        let (knots, degree) = if direction_u {
            (&info.surface.knots_u, info.surface.degree_u)
        } else {
            (&info.surface.knots_v, info.surface.degree_v)
        };
        (8.0_f64)
            .max(((interior_knot_count(knots, degree) + 1) * (degree + 1)) as f64 * density)
            .ceil()
            .min(24.0) as usize
    };
    let nu = grid_count(first, true);
    let nv = grid_count(first, false);
    let first_box = Bounds::from_surface_controls(first.surface)?;
    let second_box = Bounds::from_surface_controls(second.surface)?;
    let gate = first_box.diagonal().min(second_box.diagonal()) * 0.15 + tolerance;
    let expanded_second = second_box.expanded((tolerance * 100.0).max(gate));
    let mut starts = Vec::new();
    for i in 0..=nu {
        for j in 0..=nv {
            let ua = first.u0 + (first.u1 - first.u0) * i as f64 / nu as f64;
            let va = first.v0 + (first.v1 - first.v0) * j as f64 / nv as f64;
            let point = first.surface.evaluate(ua, va)?;
            if !expanded_second.contains(point) {
                continue;
            }
            let projection = project_point_to_surface(second.surface, point)?;
            if projection.distance > gate {
                continue;
            }
            if let Some(refined) =
                refine_point(first, second, ua, va, projection.u, projection.v, tolerance)?
            {
                starts.push(refined);
            }
        }
    }
    Ok(starts)
}

/// One knot-span leaf of a carrier: the control box of the span (the patch
/// lies in it, weights being positive) and the span's parametric centre.
struct SpanLeaf {
    bounds: Bounds,
    centre: [f64; 2],
}

/// The knot-span leaves of a carrier (A4): one per non-empty span pair, each
/// boxed by the `(p+1)×(q+1)` control points that influence it. A net whose
/// span structure cannot be read is one leaf, the whole box.
fn span_leaves(info: SurfaceInfo<'_>) -> Result<Vec<SpanLeaf>, String> {
    let surface = info.surface;
    let (p, q) = (surface.degree_u, surface.degree_v);
    let rows = surface.control_points.len();
    let columns = surface.control_points.first().map_or(0, Vec::len);
    let spans = |knots: &[f64], degree: usize, count: usize| -> Vec<usize> {
        (degree..count).filter(|&i| i + 1 < knots.len() && knots[i] < knots[i + 1]).collect()
    };
    let (spans_u, spans_v) = (spans(&surface.knots_u, p, rows), spans(&surface.knots_v, q, columns));
    if spans_u.is_empty() || spans_v.is_empty() {
        return Ok(vec![SpanLeaf {
            bounds: Bounds::from_surface_controls(surface)?,
            centre: [0.5 * (info.u0 + info.u1), 0.5 * (info.v0 + info.v1)],
        }]);
    }
    let mut leaves = Vec::with_capacity(spans_u.len() * spans_v.len());
    for &i in &spans_u {
        for &j in &spans_v {
            let mut minimum = Vec3::new(f64::INFINITY, f64::INFINITY, f64::INFINITY);
            let mut maximum = Vec3::new(f64::NEG_INFINITY, f64::NEG_INFINITY, f64::NEG_INFINITY);
            for row in &surface.control_points[i - p..=i] {
                for control in &row[j - q..=j] {
                    let point = control.point()?;
                    minimum.x = minimum.x.min(point.x);
                    minimum.y = minimum.y.min(point.y);
                    minimum.z = minimum.z.min(point.z);
                    maximum.x = maximum.x.max(point.x);
                    maximum.y = maximum.y.max(point.y);
                    maximum.z = maximum.z.max(point.z);
                }
            }
            leaves.push(SpanLeaf {
                bounds: Bounds { minimum, maximum },
                centre: [
                    0.5 * (surface.knots_u[i] + surface.knots_u[i + 1]),
                    0.5 * (surface.knots_v[j] + surface.knots_v[j + 1]),
                ],
            });
        }
    }
    Ok(leaves)
}

/// Above this many overlapping leaf pairs the tree seeding hands back to the
/// grid: two dense nets that overlap everywhere would otherwise refine tens
/// of thousands of candidates where the grid's few hundred find the same
/// curves.
const TREE_SEED_PAIR_CAP: usize = 4096;

/// A4: interior start candidates from the two carriers' knot-span leaves.
/// For every pair of leaves whose boxes overlap (each grown by the same gate
/// the grid uses) two candidates are refined onto both carriers: the first
/// leaf's parametric centre projected onto the second carrier from the second
/// leaf's centre, and the converse. `None` when the pair count is over
/// [`TREE_SEED_PAIR_CAP`], which the caller answers with the grid.
fn tree_start_points(
    first: SurfaceInfo<'_>,
    second: SurfaceInfo<'_>,
    tolerance: f64,
) -> Result<Option<(Vec<IntersectionPoint>, usize)>, String> {
    let first_box = Bounds::from_surface_controls(first.surface)?;
    let second_box = Bounds::from_surface_controls(second.surface)?;
    let gate = first_box.diagonal().min(second_box.diagonal()) * 0.15 + tolerance;
    let grow = (tolerance * 100.0).max(gate);
    let leaves_a = span_leaves(first)?;
    let leaves_b = span_leaves(second)?;
    let mut pairs = Vec::new();
    for (ia, leaf_a) in leaves_a.iter().enumerate() {
        for (ib, leaf_b) in leaves_b.iter().enumerate() {
            if leaf_a.bounds.intersects(leaf_b.bounds, grow) {
                pairs.push((ia, ib));
                if pairs.len() > TREE_SEED_PAIR_CAP {
                    return Ok(None);
                }
            }
        }
    }
    let mut starts = Vec::new();
    for (ia, ib) in &pairs {
        let (leaf_a, leaf_b) = (&leaves_a[*ia], &leaves_b[*ib]);
        // A leaf's centre is at most a leaf diagonal from anything in its
        // box, so a candidate that far from the other carrier is still the
        // pair's own and is refined; the grid's gate (a fraction of the
        // whole carrier) would drop every candidate of a leaf pair smaller
        // than it — a sphere of radius `0.005 L` on an `L` sheet.
        let reach = gate.max(leaf_a.bounds.diagonal().max(leaf_b.bounds.diagonal()));
        // The first leaf's centre onto the second carrier, seeded from the
        // second leaf's centre; then the converse.
        for (from, onto, from_info, onto_info, from_first) in [
            (leaf_a, leaf_b, first, second, true),
            (leaf_b, leaf_a, second, first, false),
        ] {
            let point = from_info.surface.evaluate(from.centre[0], from.centre[1])?;
            let projection = project_point_to_surface_from_seed(onto_info.surface, point, onto.centre)?;
            if projection.distance > reach {
                continue;
            }
            let refined = if from_first {
                refine_point(first, second, from.centre[0], from.centre[1], projection.u, projection.v, tolerance)?
            } else {
                refine_point(first, second, projection.u, projection.v, from.centre[0], from.centre[1], tolerance)?
            };
            if let Some(refined) = refined {
                starts.push(refined);
            }
        }
    }
    Ok(Some((starts, pairs.len())))
}

/// Whether the two carriers CROSS at `point` (`|n_a × n_b|` at or above
/// [`TRANSVERSE_START_CROSS`]) rather than touch tangentially; a surface
/// with no normal there counts as not crossing.
fn transverse_at(
    first: SurfaceInfo<'_>,
    second: SurfaceInfo<'_>,
    point: IntersectionPoint,
) -> bool {
    crossing_at(first, second, point) >= TRANSVERSE_START_CROSS
}

/// `|n_a × n_b|` at `point`; zero where either carrier has no normal there.
fn crossing_at(
    first: SurfaceInfo<'_>,
    second: SurfaceInfo<'_>,
    point: IntersectionPoint,
) -> f64 {
    match (
        first.surface.normal(point.ua, point.va),
        second.surface.normal(point.ub, point.vb),
    ) {
        (Ok(a), Ok(b)) => a.cross(b).length(),
        _ => 0.0,
    }
}

fn tangent_at(
    first: SurfaceInfo<'_>,
    second: SurfaceInfo<'_>,
    point: IntersectionPoint,
) -> Result<Option<Vec3>, String> {
    let first_normal = first.surface.normal(point.ua, point.va).ok();
    let second_normal = second.surface.normal(point.ub, point.vb).ok();
    match (first_normal, second_normal) {
        (Some(a), Some(b)) => {
            let tangent = a.cross(b);
            if tangent.length() <= 1e-9 {
                Ok(None)
            } else {
                Ok(Some(tangent.normalized()?))
            }
        }
        _ => Ok(None),
    }
}

fn polish_boundary(
    first: SurfaceInfo<'_>,
    second: SurfaceInfo<'_>,
    mut point: IntersectionPoint,
    tolerance: f64,
) -> Result<Option<IntersectionPoint>, String> {
    let free = [
        first.closed_u || (point.ua > first.u0 && point.ua < first.u1),
        first.closed_v || (point.va > first.v0 && point.va < first.v1),
        second.closed_u || (point.ub > second.u0 && point.ub < second.u1),
        second.closed_v || (point.vb > second.v0 && point.vb < second.v1),
    ];
    for _ in 0..40 {
        let da = first.surface.derivatives(point.ua, point.va, 1)?;
        let db = second.surface.derivatives(point.ub, point.vb, 1)?;
        let residual = da[0][0].sub(db[0][0]);
        if residual.length() <= tolerance {
            point.point = da[0][0].add(db[0][0]).scale(0.5);
            return Ok(Some(point));
        }
        let all_columns = [
            da[1][0],
            da[0][1],
            db[1][0].scale(-1.0),
            db[0][1].scale(-1.0),
        ];
        let indices: Vec<usize> = (0..4).filter(|index| free[*index]).collect();
        if indices.is_empty() {
            return Ok(None);
        }
        let mut matrix = [[0.0f64; 4]; 4];
        let mut rhs = [0.0f64; 4];
        for (row, &r) in indices.iter().enumerate() {
            rhs[row] = -all_columns[r].dot(residual);
            for (column, &c) in indices.iter().enumerate() {
                matrix[row][column] = all_columns[r].dot(all_columns[c]);
            }
        }
        let changes = match solve_small(matrix, rhs, indices.len()) {
            Ok(value) => value,
            Err(_) => return Ok(None),
        };
        let mut update = [0.0; 4];
        for (index, &parameter_index) in indices.iter().enumerate() {
            update[parameter_index] = changes[index];
        }
        point.ua = fit(point.ua + update[0], first.u0, first.u1, first.closed_u);
        point.va = fit(point.va + update[1], first.v0, first.v1, first.closed_v);
        point.ub = fit(point.ub + update[2], second.u0, second.u1, second.closed_u);
        point.vb = fit(point.vb + update[3], second.v0, second.v1, second.closed_v);
    }
    Ok(None)
}

fn correct(
    first: SurfaceInfo<'_>,
    second: SurfaceInfo<'_>,
    from: IntersectionPoint,
    predicted: Vec3,
    tangent: Vec3,
    tolerance: f64,
) -> Result<Option<(IntersectionPoint, bool)>, String> {
    let mut point = from;
    let mut boundary = false;
    for _ in 0..30 {
        let da = first.surface.derivatives(point.ua, point.va, 1)?;
        let db = second.surface.derivatives(point.ub, point.vb, 1)?;
        let residual = da[0][0].sub(db[0][0]);
        let plane_residual = da[0][0].sub(predicted).dot(tangent);
        if residual.length() <= tolerance * 0.01 + EPSILON
            && plane_residual.abs() <= tolerance * 0.01 + EPSILON
        {
            point.point = da[0][0].add(db[0][0]).scale(0.5);
            return Ok(Some((point, boundary)));
        }
        let matrix = [
            [da[1][0].x, da[0][1].x, -db[1][0].x, -db[0][1].x],
            [da[1][0].y, da[0][1].y, -db[1][0].y, -db[0][1].y],
            [da[1][0].z, da[0][1].z, -db[1][0].z, -db[0][1].z],
            [da[1][0].dot(tangent), da[0][1].dot(tangent), 0.0, 0.0],
        ];
        let changes = match solve_small(
            matrix,
            [-residual.x, -residual.y, -residual.z, -plane_residual],
            4,
        ) {
            Ok(value) => value,
            Err(_) => return Ok(None),
        };
        let scale = [
            changes[0].abs() / ((first.u1 - first.u0) / 4.0),
            changes[1].abs() / ((first.v1 - first.v0) / 4.0),
            changes[2].abs() / ((second.u1 - second.u0) / 4.0),
            changes[3].abs() / ((second.v1 - second.v0) / 4.0),
            1.0,
        ]
        .into_iter()
        .fold(1.0_f64, f64::max);
        let raw = [
            point.ua + changes[0] / scale,
            point.va + changes[1] / scale,
            point.ub + changes[2] / scale,
            point.vb + changes[3] / scale,
        ];
        let domains = [
            (first.u0, first.u1, first.closed_u),
            (first.v0, first.v1, first.closed_v),
            (second.u0, second.u1, second.closed_u),
            (second.v0, second.v1, second.closed_v),
        ];
        boundary = false;
        let mut next = [0.0; 4];
        for index in 0..4 {
            next[index] = fit(
                raw[index],
                domains[index].0,
                domains[index].1,
                domains[index].2,
            );
            if !domains[index].2
                && (next[index] == domains[index].0 || next[index] == domains[index].1)
                && raw[index] != next[index]
            {
                boundary = true;
            }
        }
        let old = [point.ua, point.va, point.ub, point.vb];
        let spans = [
            first.u1 - first.u0,
            first.v1 - first.v0,
            second.u1 - second.u0,
            second.v1 - second.v0,
        ];
        let stalled = (0..4).all(|index| (next[index] - old[index]).abs() <= 1e-14 * spans[index]);
        point.ua = next[0];
        point.va = next[1];
        point.ub = next[2];
        point.vb = next[3];
        if stalled {
            if boundary {
                if let Some(polished) = polish_boundary(first, second, point, tolerance)? {
                    return Ok(Some((polished, true)));
                }
            }
            return Ok(None);
        }
    }
    Ok(None)
}

struct Trace {
    points: Vec<IntersectionPoint>,
    /// One unit tangent per point, along the trace direction.
    tangents: Vec<Vec3>,
    closed: bool,
    /// The largest span deviation measured, `0.0` when none was asked for.
    deviation: f64,
}

/// A branch assembled from its traces: stations, one tangent per station
/// along the branch, and the largest span deviation either trace measured.
struct Spliced {
    points: Vec<IntersectionPoint>,
    tangents: Vec<Vec3>,
    deviation: f64,
}

impl From<Trace> for Spliced {
    fn from(trace: Trace) -> Self {
        Self {
            points: trace.points,
            tangents: trace.tangents,
            deviation: trace.deviation,
        }
    }
}

/// `reverse(backward[1..]) ++ forward`: the backward trace walked the other
/// way, so its tangents are negated to run along the branch.
fn splice(backward: Trace, forward: Trace) -> Spliced {
    let mut points: Vec<_> = backward.points.into_iter().skip(1).rev().collect();
    let mut tangents: Vec<_> = backward
        .tangents
        .into_iter()
        .skip(1)
        .rev()
        .map(|tangent| tangent.scale(-1.0))
        .collect();
    points.extend(forward.points);
    tangents.extend(forward.tangents);
    Spliced {
        points,
        tangents,
        deviation: backward.deviation.max(forward.deviation),
    }
}

/// Preserve complete tangents for UV reuse without asking the marcher to
/// measure or change its spans. Deviation remains absent unless measured.
fn curve_from(all: Spliced, closed: bool, measured: bool) -> SurfaceIntersectionCurve {
    let complete = all.tangents.len() == all.points.len();
    SurfaceIntersectionCurve {
        points: all.points.iter().map(|point| point.point).collect(),
        params_a: all.points.iter().map(|point| [point.ua, point.va]).collect(),
        params_b: all.points.iter().map(|point| [point.ub, point.vb]).collect(),
        closed,
        tangents: (complete && (measured || (crate::imprint::carried_uv_enabled() && all.points.len() >= crate::imprint::carried_uv_min_stations()))).then_some(all.tangents),
        span_deviation: (complete && measured).then_some(all.deviation),
        tangent: false,
    }
}

/// The cubic Hermite through `p0` and `p1` with end derivatives `d0`, `d1`,
/// at `s` in `[0, 1]`.
fn hermite_at(p0: Vec3, d0: Vec3, p1: Vec3, d1: Vec3, s: f64) -> Vec3 {
    let s2 = s * s;
    let s3 = s2 * s;
    p0.scale(2.0 * s3 - 3.0 * s2 + 1.0)
        .add(d0.scale(s3 - 2.0 * s2 + s))
        .add(p1.scale(-2.0 * s3 + 3.0 * s2))
        .add(d1.scale(s3 - s2))
}

/// A cubic Hermite in one carrier's parameter plane between two stations:
/// end parameters, and end derivatives that are the least-squares images of
/// the chord-scaled 3D tangents through `[S_u S_v]`. Closed directions are
/// unwrapped so the Hermite runs the short way round; [`fit`] wraps the
/// samples back.
struct ParameterHermite {
    p0: [f64; 2],
    d0: [f64; 2],
    p1: [f64; 2],
    d1: [f64; 2],
}

impl ParameterHermite {
    fn new(
        info: SurfaceInfo<'_>,
        p0: [f64; 2],
        t0: Vec3,
        p1: [f64; 2],
        t1: Vec3,
        chord: f64,
    ) -> Result<Self, String> {
        let image = |uv: [f64; 2], tangent: Vec3| -> Result<[f64; 2], String> {
            let d = info.surface.derivatives(uv[0], uv[1], 1)?;
            let (su, sv) = (d[1][0], d[0][1]);
            let (e, f, g) = (su.dot(su), su.dot(sv), sv.dot(sv));
            let (bu, bv) = (su.dot(tangent), sv.dot(tangent));
            let det = e * g - f * f;
            if det.abs() <= EPSILON * (1.0 + e * g) {
                return Ok([0.0, 0.0]);
            }
            Ok([
                (g * bu - f * bv) / det * chord,
                (e * bv - f * bu) / det * chord,
            ])
        };
        let mut p1 = p1;
        let unwrap = |value: f64, near: f64, closed: bool, minimum: f64, maximum: f64| {
            let period = maximum - minimum;
            if closed && period > 0.0 && (value - near).abs() > 0.5 * period {
                value - period * ((value - near) / period).round()
            } else {
                value
            }
        };
        p1[0] = unwrap(p1[0], p0[0], info.closed_u, info.u0, info.u1);
        p1[1] = unwrap(p1[1], p0[1], info.closed_v, info.v0, info.v1);
        Ok(Self {
            p0,
            d0: image(p0, t0)?,
            p1,
            d1: image([fit(p1[0], info.u0, info.u1, info.closed_u), fit(p1[1], info.v0, info.v1, info.closed_v)], t1)?,
        })
    }

    fn at(&self, s: f64) -> [f64; 2] {
        let s2 = s * s;
        let s3 = s2 * s;
        let (h00, h10, h01, h11) = (
            2.0 * s3 - 3.0 * s2 + 1.0,
            s3 - 2.0 * s2 + s,
            -2.0 * s3 + 3.0 * s2,
            s3 - s2,
        );
        [
            h00 * self.p0[0] + h10 * self.d0[0] + h01 * self.p1[0] + h11 * self.d1[0],
            h00 * self.p0[1] + h10 * self.d0[1] + h01 * self.p1[1] + h11 * self.d1[1],
        ]
    }
}

/// It is what the emitted span would miss by if the stations were
/// interpolated with these tangents, measured against the carriers
/// themselves, which no test on the stations alone can see.
fn span_deviation(
    first: SurfaceInfo<'_>,
    second: SurfaceInfo<'_>,
    from: IntersectionPoint,
    from_tangent: Vec3,
    to: IntersectionPoint,
    to_tangent: Vec3,
) -> Result<f64, String> {
    let chord = to.point.sub(from.point).length();
    if chord <= EPSILON {
        return Ok(0.0);
    }
    let on_a = ParameterHermite::new(first, [from.ua, from.va], from_tangent, [to.ua, to.va], to_tangent, chord)?;
    let on_b = ParameterHermite::new(second, [from.ub, from.vb], from_tangent, [to.ub, to.vb], to_tangent, chord)?;
    let (d0, d1) = (from_tangent.scale(chord), to_tangent.scale(chord));
    let mut worst: f64 = 0.0;
    for s in [0.17, 0.33, 0.5, 0.67, 0.83] {
        let c = hermite_at(from.point, d0, to.point, d1, s);
        let [ua, va] = on_a.at(s);
        let a = first.surface.evaluate(fit(ua, first.u0, first.u1, first.closed_u), fit(va, first.v0, first.v1, first.closed_v))?;
        let [ub, vb] = on_b.at(s);
        let b = second.surface.evaluate(fit(ub, second.u0, second.u1, second.closed_u), fit(vb, second.v0, second.v1, second.closed_v))?;
        worst = worst
            .max(a.sub(b).length())
            .max(a.sub(c).length())
            .max(b.sub(c).length());
    }
    Ok(worst)
}

fn vector_angle(a: Vec3, b: Vec3) -> f64 {
    (a.dot(b) / (a.length() * b.length()))
        .clamp(-1.0, 1.0)
        .acos()
}

/// Predictive step size from the surface-normal turn budget (Golovanov
/// §4.12): for each parameter of each surface the permissible parametric
/// step is Δα·√g/b (g, b = first/second fundamental form coefficients);
/// its 3D advance is Δα·g/b, and the usable step is the smallest advance
/// PROJECTED onto the march direction (the displacement sphere of §4.8),
/// ignoring parameters that barely move along the curve.  Returns None
/// when curvature data is unavailable (degenerate normals) — the caller
/// keeps its reactive step then.
fn normal_turn_step(
    first: SurfaceInfo<'_>,
    second: SurfaceInfo<'_>,
    point: IntersectionPoint,
    tangent: Vec3,
    budget: f64,
) -> Option<f64> {
    let mut best: Option<f64> = None;
    for (surface, u, v) in [
        (first.surface, point.ua, point.va),
        (second.surface, point.ub, point.vb),
    ] {
        let derivatives = surface.derivatives(u, v, 2).ok()?;
        let normal = derivatives[1][0].cross(derivatives[0][1]);
        let normal_length = normal.length();
        if normal_length <= 1e-12 {
            continue;
        }
        let unit_normal = normal.scale(1.0 / normal_length);
        for (first_derivative, second_derivative) in [
            (derivatives[1][0], derivatives[2][0]),
            (derivatives[0][1], derivatives[0][2]),
        ] {
            let metric = first_derivative.dot(first_derivative);
            if metric <= 1e-16 {
                continue;
            }
            let curvature = second_derivative.dot(unit_normal).abs();
            if curvature <= 1e-12 {
                continue; // flat along this parameter: no budget limit
            }
            let advance = budget * metric / curvature;
            let alignment = first_derivative
                .scale(1.0 / metric.sqrt())
                .dot(tangent)
                .abs();
            if alignment <= 0.1 {
                continue; // barely moves along the curve (§4.8)
            }
            let along = advance * alignment;
            if best.map(|value| along < value).unwrap_or(true) {
                best = Some(along);
            }
        }
    }
    best
}

/// The switches a trace reads, taken from the environment once per
/// intersection call rather than once per trace.
#[derive(Clone, Copy)]
struct TraceSwitches {
    /// `BREP_SSI_FIRST_STEP_BUDGET=0` lets the first step skip the §4.12
    /// ceiling, as every trace did before 2026-09-15.
    first_step_ceiling: bool,
    /// `BREP_DEBUG_SSI_TRACE=1`: every start and every accepted station.
    debug: bool,
}

impl TraceSwitches {
    fn from_env() -> Self {
        Self {
            first_step_ceiling: std::env::var("BREP_SSI_FIRST_STEP_BUDGET").as_deref() != Ok("0"),
            debug: std::env::var_os("BREP_DEBUG_SSI_TRACE").is_some(),
        }
    }
}

#[allow(clippy::too_many_arguments)]
fn trace(
    first: SurfaceInfo<'_>,
    second: SurfaceInfo<'_>,
    start: IntersectionPoint,
    direction: f64,
    tolerance: f64,
    initial_step: f64,
    minimum_step: f64,
    maximum_step: f64,
    maximum_steps: usize,
    switches: TraceSwitches,
    span_budget: Option<f64>,
) -> Result<Trace, String> {
    let mut points = vec![start];
    let mut current = start;
    let Some(mut tangent) = tangent_at(first, second, start)? else {
        return Ok(Trace {
            points,
            tangents: Vec::new(),
            closed: false,
            deviation: 0.0,
        });
    };
    tangent = tangent.scale(direction);
    let mut tangents = vec![tangent];
    let mut deviation: f64 = 0.0;
    // The FIRST step is held to the same §4.12 normal-turn ceiling as every
    // later one. The ceiling used to be applied only after a step was accepted,
    // so step zero was `diagonal / 100` whatever the curvature — and a step
    // that lands on a trim-window boundary ends the branch before the turn
    // check below ever reads it. On the rescue pair
    // (`boolean_fuzz_corpus/23_section_pcurve_fold_t222`, cone × a 90° pin-wall
    // window) that one step was the whole 0.69 and 0.77 of section, turning the
    // tangent 0.97 rad where the ceiling allows 1.0e-2 of advance: two
    // stations, a four-point fit, and trims 3.0e-2 and 3.8e-2 apart. Escape
    // hatch: BREP_SSI_FIRST_STEP_BUDGET=0.
    let mut step_size = initial_step.min(maximum_step);
    if switches.first_step_ceiling {
        if let Some(budget) = normal_turn_step(first, second, start, tangent, 0.1) {
            step_size = step_size.min(budget).clamp(minimum_step, maximum_step);
        }
    }
    let mut terminated = false;
    for _ in 0..maximum_steps {
        let mut accepted = None;
        while step_size >= minimum_step {
            let predicted = current.point.add(tangent.scale(step_size));
            if let Some((corrected, boundary)) =
                correct(first, second, current, predicted, tangent, tolerance)?
            {
                if corrected.point.sub(current.point).length() <= 2.5 * step_size {
                    accepted = Some((corrected, boundary));
                    break;
                }
            }
            step_size /= 2.0;
        }
        let Some((candidate, boundary)) = accepted else {
            terminated = true;
            break;
        };
        points.push(candidate);
        if switches.debug {
            // One line per accepted station: the tangent's turn across the
            // step, the normal-turn ceiling where it started, the step asked
            // for and the distance actually covered.
            let turn = tangent_at(first, second, candidate)
                .ok()
                .flatten()
                .map(|next| vector_angle(tangent, if next.dot(tangent) < 0.0 { next.scale(-1.0) } else { next }))
                .unwrap_or(f64::NAN);
            let budget = normal_turn_step(first, second, current, tangent, 0.1).unwrap_or(f64::NAN);
            let at = candidate.point;
            eprintln!(
                "SSI-TRACE dir {direction} step {step_size:.4e} jump {:.4e} turn {turn:.4} ceiling {budget:.4e} boundary {boundary} p ({:.6},{:.6},{:.6})",
                at.sub(current.point).length(),
                at.x,
                at.y,
                at.z
            );
        }
        // A station that ends the trace still gets a tangent (its own where
        // one exists, else the previous one carried forward), so the tangent
        // list stays parallel to the stations.
        let next = tangent_at(first, second, candidate)?.map(|next| {
            if next.dot(tangent) < 0.0 { next.scale(-1.0) } else { next }
        });
        if boundary {
            tangents.push(next.unwrap_or(tangent));
            terminated = true;
            break;
        }
        let Some(next_tangent) = next else {
            tangents.push(tangent);
            terminated = true;
            break;
        };
        let angle = vector_angle(tangent, next_tangent);
        if angle > 0.35 {
            points.pop();
            step_size = minimum_step.max(step_size / 2.0);
            if step_size <= minimum_step * 1.01 {
                points.push(candidate);
            } else {
                continue;
            }
        }
        // The span test (A1): the span between `current` and `candidate`
        // is measured against both carriers; over budget, it is re-stepped
        // at half the step, like a turn over 0.35, and accepted at the
        // minimum step regardless.
        let mut span_fine = true;
        if let Some(budget) = span_budget {
            let measured = span_deviation(first, second, current, tangent, candidate, next_tangent)?;
            if measured > budget && step_size > minimum_step * 1.01 {
                points.pop();
                step_size = minimum_step.max(step_size / 2.0);
                continue;
            }
            deviation = deviation.max(measured);
            span_fine = measured < budget / 8.0;
        }
        tangents.push(next_tangent);
        // §4.12 normal-turn budget on BOTH surfaces as a hard CEILING on
        // the reactive controller: growth stays reactive (accelerating
        // into under-sampled flats regressed downstream curve fits), but
        // the budget stops the step from outrunning surface curvature.
        let reactive = if angle < 0.03 && span_fine {
            step_size * 1.5
        } else if angle > 0.15 {
            step_size * 0.6
        } else {
            step_size
        };
        step_size = match normal_turn_step(first, second, candidate, next_tangent, 0.1) {
            Some(budget) => reactive.min(budget),
            None => reactive,
        }
        .clamp(minimum_step, maximum_step);
        if points.len() > 4 && candidate.point.sub(start.point).length() <= step_size * 1.2 {
            let to_start = start.point.sub(candidate.point);
            if to_start.length() <= EPSILON || to_start.dot(next_tangent) >= 0.0 {
                points.push(start);
                tangents.push(tangents[0]);
                return Ok(Trace {
                    points,
                    tangents,
                    closed: true,
                    deviation,
                });
            }
        }
        current = candidate;
        tangent = next_tangent;
    }
    if !terminated {
        // The step budget ran out with the curve still going: a silently
        // truncated branch flows into topology as if complete, which is far
        // worse than a loud failure here.
        return Err(format!(
            "surface intersection trace exhausted {maximum_steps} steps \
             ({} points, step {step_size:.3e}) without reaching a boundary or closure",
            points.len()
        ));
    }
    Ok(Trace {
        points,
        tangents,
        closed: false,
        deviation,
    })
}

fn point_segment_distance(point: Vec3, start: Vec3, end: Vec3) -> f64 {
    point.distance_to_segment(start, end, EPSILON)
}

#[derive(Clone, Debug, Serialize)]
pub struct SurfaceIntersectionCurve {
    pub points: Vec<Vec3>,
    pub params_a: Vec<[f64; 2]>,
    pub params_b: Vec<[f64; 2]>,
    pub closed: bool,
    /// The section's unit tangent at each station, along the curve's
    /// direction; retained for trace-UV reuse or when the march ran with a
    /// [`SurfaceIntersectionOptions::span_budget`].
    #[serde(skip_serializing_if = "Option::is_none")]
    pub tangents: Option<Vec<Vec3>>,
    /// The largest span deviation the march measured on this curve;
    /// present only when it ran with a `span_budget`.
    #[serde(skip_serializing_if = "Option::is_none")]
    pub span_deviation: Option<f64>,
    /// The curve is a TANGENT section: the carriers touch along it with
    /// parallel normals rather than crossing it, so it separates nothing on
    /// either face. Only `intersect::tangent_curve` produces one; every
    /// marched or supplemental curve reads `false`.
    #[serde(skip_serializing_if = "std::ops::Not::not")]
    pub tangent: bool,
}

#[derive(Clone, Debug, Deserialize)]
pub struct SurfaceIntersectionOptions {
    #[serde(default = "default_tolerance")]
    pub tolerance: f64,
    #[serde(default = "default_density")]
    pub seed_density: f64,
    #[serde(default = "default_maximum_steps")]
    pub maximum_steps: usize,
    pub maximum_step: Option<f64>,
    #[serde(default)]
    pub seed_points: Vec<Vec3>,
    #[serde(default)]
    pub seed_only: bool,
    pub seed_gate: Option<f64>,
    /// When set, every accepted span is re-sampled as the cubic Hermite
    /// through its two stations — chord-scaled tangents, in 3D and in each
    /// carrier's parameter plane — at five interior parameters, and the
    /// span's deviation is the largest distance among the 3D Hermite and
    /// the two carriers' images of their parameter Hermites. A span over
    /// the budget is rejected and re-stepped at half the step (accepted at
    /// the minimum step regardless), and the step grows only while the
    /// deviation stays under an eighth of the budget. The curve then
    /// reports its station tangents and its largest span deviation.
    ///
    /// `None`, the default, measures nothing and marches exactly as before.
    /// The budget a lane carries is what its FIT can absorb (the imprint's
    /// `intersection_fit`), never the corrector's `tolerance`: a cubic
    /// Hermite over a circle of radius `r` with step `h` misses by about
    /// `r (h/r)^4 / 384`, so a budget of `1e-7` would hold the step near
    /// `r/15` and multiply stations on every curved section.
    #[serde(default)]
    pub span_budget: Option<f64>,
    /// Off, the default, keeps the grid-then-seeds order byte for byte.
    #[serde(default)]
    pub ordered_starts: bool,
    /// A3's second half: a start an earlier trace ran through is consumed
    /// with a station snapped to it (the start is a refined intersection
    /// point, the chord it lies by is not), instead of merely dropped. Off,
    /// the default, keeps the first-claimant rule. Measured apart from the
    /// ordering because it inserts stations into traced curves.
    #[serde(default)]
    pub consume_starts: bool,
    /// The transverse gate stays. Off, the default, grids as before.
    #[serde(default)]
    pub tree_seeds: bool,
    /// SUB-GATE STARTS (2026-10-17, the revolve-into-bore report): the
    /// `|n_a × n_b|` an EXPLICIT seed is admitted at, in place of
    /// `TRANSVERSE_START_CROSS`. Grid and tree starts keep the gate: the
    /// tangency-band runaway it exists for is theirs (a refined start inside
    /// a band is a point no transverse curve passes through). An explicit
    /// seed the caller has PROVEN to lie on a crossing — a trim edge of one
    /// face that leaves one side of the other carrier for the other at the
    /// seed — is a point of a transverse section whatever the angle, and the
    /// march from it is sound down to where the corrector can still tell the
    /// section from the tangency band: the lateral uncertainty `tol / α` of
    /// a crossing at angle `α` against the band's half-width `√(2 R tol)`
    /// across a contact of curvature radius `R`, so `α ≥ √(tol / 2R)`; the
    /// caller derives the bound from its own tolerance and scale. A seed
    /// below it is dropped exactly as before. `None`, the default, keeps the
    /// gate byte for byte.
    #[serde(default)]
    pub seed_start_cross: Option<f64>,
}

fn default_tolerance() -> f64 {
    LINEAR_TOLERANCE
}
fn default_density() -> f64 {
    1.0
}
fn default_maximum_steps() -> usize {
    4000
}

impl Default for SurfaceIntersectionOptions {
    fn default() -> Self {
        Self {
            tolerance: default_tolerance(),
            seed_density: default_density(),
            maximum_steps: default_maximum_steps(),
            maximum_step: None,
            seed_points: Vec::new(),
            seed_only: false,
            seed_gate: None,
            span_budget: None,
            ordered_starts: false,
            consume_starts: false,
            tree_seeds: false,
            seed_start_cross: None,
        }
    }
}

/// A station used only to construct an emitted section. Refinement preserves
/// every supplied station; it never replaces the topology-bearing trace.
#[derive(Clone, Copy, Debug)]
pub(crate) struct EmissionSample {
    pub point: Vec3,
    pub uv_a: [f64; 2],
    pub uv_b: [f64; 2],
    pub tangent: Vec3,
}

/// Subdivide smooth spans locally until their joint 3D/UV Hermites pass the
/// existing span check. Failure is a conservative request for the fit route.
/// No seed search, branch tracing, clipping, station motion or topology edit.
pub(crate) fn refine_emission_samples(
    first_surface: &NurbsSurface,
    second_surface: &NurbsSurface,
    samples: &[EmissionSample],
    budget: f64,
) -> Result<Option<Vec<EmissionSample>>, String> {
    if samples.len() < 2 || !(budget > 0.0 && budget.is_finite()) { return Ok(None); }
    let first = surface_info(first_surface)?;
    let second = surface_info(second_surface)?;
    let point = |s: EmissionSample| IntersectionPoint {
        point: s.point, ua: s.uv_a[0], va: s.uv_a[1], ub: s.uv_b[0], vb: s.uv_b[1],
    };
    // Fixed endpoints must themselves meet the emission floor. Refining an
    // interior cannot repair an inaccurate endpoint without moving topology.
    for s in samples {
        if !(first_surface.evaluate(s.uv_a[0], s.uv_a[1])?.sub(s.point).length() <= budget)
            || !(second_surface.evaluate(s.uv_b[0], s.uv_b[1])?.sub(s.point).length() <= budget)
        { return Ok(None); }
    }
    let mut pending: Vec<_> = samples.windows(2).rev().map(|p| (p[0], p[1], 0usize)).collect();
    let mut out = vec![samples[0]];
    let mut inserted = 0;
    while let Some((a, b, depth)) = pending.pop() {
        let pa = point(a);
        let pb = point(b);
        if span_deviation(first, second, pa, a.tangent, pb, b.tangent)? <= budget {
            out.push(b);
            continue;
        }
        let chord_vector = b.point.sub(a.point);
        let chord = chord_vector.length();
        if depth >= 8 || inserted >= 4096 || chord <= 4.0 * crate::KNOT_IDENTITY_TOL
            || crossing_at(first, second, pa) < 0.05 || crossing_at(first, second, pb) < 0.05
            || a.tangent.dot(b.tangent) < 0.5
            || a.tangent.dot(chord_vector) <= 0.5 * chord || b.tangent.dot(chord_vector) <= 0.5 * chord
        { return Ok(None); }
        let ha = ParameterHermite::new(first, a.uv_a, a.tangent, b.uv_a, b.tangent, chord)?;
        let hb = ParameterHermite::new(second, a.uv_b, a.tangent, b.uv_b, b.tangent, chord)?;
        let ua = ha.at(0.5);
        let ub = hb.at(0.5);
        let predicted = hermite_at(a.point, a.tangent.scale(chord), b.point, b.tangent.scale(chord), 0.5);
        let direction = a.tangent.add(b.tangent).normalized()?;
        let seed = IntersectionPoint {
            point: predicted,
            ua: fit(ua[0], first.u0, first.u1, first.closed_u),
            va: fit(ua[1], first.v0, first.v1, first.closed_v),
            ub: fit(ub[0], second.u0, second.u1, second.closed_u),
            vb: fit(ub[1], second.v0, second.v1, second.closed_v),
        };
        let Some((mid, boundary)) = correct(first, second, seed, predicted, direction, budget * 0.1)? else { return Ok(None); };
        let along = mid.point.sub(a.point).dot(chord_vector) / (chord * chord);
        if boundary || mid.point.sub(predicted).length() > 0.25 * chord
            || !(0.2..=0.8).contains(&along) || crossing_at(first, second, mid) < 0.05
        { return Ok(None); }
        let Some(mut tangent) = tangent_at(first, second, mid)? else { return Ok(None); };
        if tangent.dot(direction) < 0.0 { tangent = tangent.scale(-1.0); }
        if tangent.dot(a.tangent) < 0.5 || tangent.dot(b.tangent) < 0.5 { return Ok(None); }
        let m = EmissionSample { point: mid.point, uv_a: [mid.ua, mid.va], uv_b: [mid.ub, mid.vb], tangent };
        inserted += 1;
        pending.push((m, b, depth + 1));
        pending.push((a, m, depth + 1));
    }
    Ok(Some(out))
}

/// Refine `seed` onto the intersection of `first_surface` and `second_surface`:
/// the closest point on each carrier seeds the same Newton the march uses
/// ([`refine_point`]), so the answer is an INTERSECTION point at the march's own
/// residual (`tolerance * 0.01`), not a projection onto one surface — a point
/// merely projected onto one carrier would carry the very bias a section
/// refiner exists to remove (2026-09-26, the sphere/bore rim of `BadBoolean`).
/// `None` when the Newton does not converge or lands further than `reach` from
/// the seed: a refiner must not pull a station onto another branch.
pub(crate) fn refine_to_intersection(
    first_surface: &NurbsSurface,
    second_surface: &NurbsSurface,
    seed: Vec3,
    tolerance: f64,
    reach: f64,
) -> Result<Option<Vec3>, String> {
    let first = surface_info(first_surface)?;
    let second = surface_info(second_surface)?;
    let on_first = project_point_to_surface(first_surface, seed)?;
    let on_second = project_point_to_surface(second_surface, seed)?;
    let Some(refined) = refine_point(
        first,
        second,
        on_first.u,
        on_first.v,
        on_second.u,
        on_second.v,
        tolerance,
    )?
    else {
        return Ok(None);
    };
    if refined.point.sub(seed).length() > reach {
        return Ok(None);
    }
    Ok(Some(refined.point))
}

pub fn intersect_surfaces(
    first_surface: &NurbsSurface,
    second_surface: &NurbsSurface,
    options: &SurfaceIntersectionOptions,
) -> Result<Vec<SurfaceIntersectionCurve>, String> {
    let _wall = crate::wall_profile::Scope::enter(crate::wall_profile::MARCH);
    let _lap = crate::projection_profile::Lap::enter_pair(first_surface, second_surface);
    let first_box = Bounds::from_surface_controls(first_surface)?;
    let second_box = Bounds::from_surface_controls(second_surface)?;
    if !first_box.intersects(second_box, options.tolerance * 10.0) {
        return Ok(Vec::new());
    }
    let first = surface_info(first_surface)?;
    let second = surface_info(second_surface)?;
    let diagonal = first_box.diagonal().min(second_box.diagonal());
    let initial_step = diagonal / 100.0;
    let minimum_step = (options.tolerance * 100.0).max(diagonal * 1e-6);
    let maximum_step = (diagonal / 15.0).min(options.maximum_step.unwrap_or(f64::INFINITY));
    let maximum_steps = step_budget(options.maximum_steps, maximum_step, diagonal);
    let mut starts = if options.seed_only {
        Vec::new()
    } else if options.tree_seeds {
        // A4: leaf-pair candidates; the grid only when the pair count is
        // over the cap.
        match tree_start_points(first, second, options.tolerance)? {
            Some((starts, _pairs)) => starts,
            None => find_start_points(first, second, options.tolerance, options.seed_density)?,
        }
    } else {
        find_start_points(first, second, options.tolerance, options.seed_density)?
    };
    // A grid start is refined onto both carriers exactly like an explicit
    // seed and is held to the same transversality gate: inside a tangency
    // band the refinement converges (the band IS within tolerance of both
    // surfaces) to a point no transverse curve passes through.
    starts.retain(|start| transverse_at(first, second, *start));
    let seed_gate = options.seed_gate.unwrap_or(options.tolerance * 100.0);
    // A3: explicit seeds are kept apart so they can be traced first.
    let grid_count = starts.len();
    for seed in &options.seed_points {
        let projection_a = project_point_to_surface(first_surface, *seed)?;
        if projection_a.distance > seed_gate {
            continue;
        }
        let projection_b = project_point_to_surface(second_surface, *seed)?;
        if projection_b.distance > seed_gate {
            continue;
        }
        let Some(refined) = refine_point(
            first,
            second,
            projection_a.u,
            projection_a.v,
            projection_b.u,
            projection_b.v,
            options.tolerance,
        )?
        else {
            continue;
        };
        // The seed's own gate: the caller's sub-gate bound where it vouches
        // for the seed, the transversality gate otherwise.
        let admitted = match options.seed_start_cross {
            Some(bound) => crossing_at(first, second, refined) >= bound.min(TRANSVERSE_START_CROSS),
            None => transverse_at(first, second, refined),
        };
        if !admitted {
            continue;
        }
        starts.push(refined);
    }
    if options.ordered_starts {
        // A3: seeds (trim-boundary pierces) before the interior candidates,
        // and within each group the most transverse first; stable, so equal
        // crossings keep their discovery order.
        let crossing = |start: &IntersectionPoint| -> f64 {
            match (
                first.surface.normal(start.ua, start.va),
                second.surface.normal(start.ub, start.vb),
            ) {
                (Ok(a), Ok(b)) => a.cross(b).length(),
                _ => 0.0,
            }
        };
        let mut seeds = starts.split_off(grid_count);
        seeds.sort_by(|a, b| crossing(b).total_cmp(&crossing(a)));
        starts.sort_by(|a, b| crossing(b).total_cmp(&crossing(a)));
        seeds.append(&mut starts);
        starts = seeds;
    }

    let switches = TraceSwitches::from_env();
    let mut curves: Vec<SurfaceIntersectionCurve> = Vec::new();
    for start in starts {
        let mut claimed = false;
        for curve in &mut curves {
            let Some((index, distance)) = curve
                .points
                .windows(2)
                .enumerate()
                .map(|(index, segment)| (index, point_segment_distance(start.point, segment[0], segment[1])))
                .filter(|(_, distance)| *distance <= initial_step * 1.5)
                .min_by(|a, b| a.1.total_cmp(&b.1))
            else {
                continue;
            };
            claimed = true;
            // A3: a start an earlier trace ran through is consumed with a
            // station snapped to it — the start is a refined intersection
            // point, the segment it lies by is a chord — unless it sits on a
            // station already.
            if options.consume_starts
                && distance > 0.0
                && start.point.sub(curve.points[index]).length() > minimum_step
                && start.point.sub(curve.points[index + 1]).length() > minimum_step
            {
                curve.points.insert(index + 1, start.point);
                if let Some(tangents) = curve.tangents.as_mut() {
                    let along = curve.points[index + 2].sub(curve.points[index]);
                    let tangent = match tangent_at(first, second, start)? {
                        Some(tangent) if tangent.dot(along) < 0.0 => tangent.scale(-1.0),
                        Some(tangent) => tangent,
                        None => tangents[index],
                    };
                    tangents.insert(index + 1, tangent);
                }
                if curve.params_a.len() > index + 1 && curve.params_b.len() > index + 1 {
                    curve.params_a.insert(index + 1, [start.ua, start.va]);
                    curve.params_b.insert(index + 1, [start.ub, start.vb]);
                }
            }
            break;
        }
        if switches.debug {
            let at = start.point;
            eprintln!(
                "SSI-START claimed {claimed} p ({:.6},{:.6},{:.6}) initial {initial_step:.4e} minimum {minimum_step:.4e} maximum {maximum_step:.4e}",
                at.x, at.y, at.z
            );
        }
        if claimed {
            continue;
        }
        let forward = trace(
            first,
            second,
            start,
            1.0,
            options.tolerance,
            initial_step,
            minimum_step,
            maximum_step,
            maximum_steps,
            switches,
            options.span_budget,
        )?;
        let (all, closed) = if forward.closed {
            (Spliced::from(forward), true)
        } else {
            let backward = trace(
                first,
                second,
                start,
                -1.0,
                options.tolerance,
                initial_step,
                minimum_step,
                maximum_step,
                maximum_steps,
                switches,
                options.span_budget,
            )?;
            (splice(backward, forward), false)
        };
        if all.points.len() < 2 {
            continue;
        }
        curves.push(curve_from(all, closed, options.span_budget.is_some()));
    }
    Ok(curves)
}

/// Minimum |n_a × n_b| for a seed/branch to count as a *transverse* crossing
/// rather than a tangential graze — the same threshold `intersect_surfaces`
/// applies to its start points.
const SUPPLEMENTAL_TRANSVERSE_CROSS: f64 = TRANSVERSE_START_CROSS;

/// Gated supplemental SSI **detector** for a pair the coarse pair-classifier
/// culled as "tangential-only" (`NearTangent` + `tangential_only`).
///
/// The 5×5 classification grid can land only on an incidental tangential KISS
/// between two curved carriers (e.g. the inner walls / tube tops of two
/// overlapping tori) and never sample the transverse loop where their tubes
/// actually CROSS, so `tangential_only` is a false positive that would drop a
/// real intersection. This routine re-seeds a DENSER grid on BOTH carriers,
/// keeps only *transverse* seeds (near-parallel normals rejected up front, so
/// the tangency band is never walked), SWALLOWS per-branch trace-exhaustion (a
/// genuine tangency band never closes/exits and would otherwise error — here
/// it simply means "no transverse curve from this seed"), and returns only
/// branches that are genuinely transverse along their length.
///
/// A *genuinely* tangential pair yields an empty result (every seed rejected /
/// every trace fruitless), so the caller skips exactly as before — the common
/// intersection path is never touched.
///
/// NOTE — deferred capability: when this DOES return branches, the true
/// intersection is *singular* (the transverse loops meet at tangent nodes,
/// e.g. equal-radius torus-torus at `(1.5, ±3.708, ±1.5)`). Imprinting them
/// requires 4-valent tangent-vertex ("checkerboard") singular assembly, which
/// the kernel does not yet do; until then the caller REFUSES such a pair with
/// a clear error rather than silently dropping the geometry or emitting the
/// cryptic downstream pcurve/open-loop error. See imprint.rs (tangential-only
/// skip) and the project singular-assembly roadmap.
pub fn intersect_surfaces_supplemental(
    first_surface: &NurbsSurface,
    second_surface: &NurbsSurface,
    options: &SurfaceIntersectionOptions,
) -> Result<Vec<SurfaceIntersectionCurve>, String> {
    let _wall = crate::wall_profile::Scope::enter(crate::wall_profile::MARCH);
    let first_box = Bounds::from_surface_controls(first_surface)?;
    let second_box = Bounds::from_surface_controls(second_surface)?;
    if !first_box.intersects(second_box, options.tolerance * 10.0) {
        return Ok(Vec::new());
    }
    let first = surface_info(first_surface)?;
    let second = surface_info(second_surface)?;
    let diagonal = first_box.diagonal().min(second_box.diagonal());
    let initial_step = diagonal / 100.0;
    let minimum_step = (options.tolerance * 100.0).max(diagonal * 1e-6);
    let maximum_step = (diagonal / 15.0).min(options.maximum_step.unwrap_or(f64::INFINITY));
    let maximum_steps = step_budget(options.maximum_steps, maximum_step, diagonal);

    // Denser self-seed (≥2× density pushes the ≤24 grid toward its cap so a
    // thin transverse overlap the classifier stepped over still gets a start),
    // gridding BOTH carriers so an interior loop touching neither trim boundary
    // is still hit from whichever surface samples it best.
    let density = options.seed_density.max(2.0);
    let mut starts: Vec<IntersectionPoint> = Vec::new();
    for gridded_second in [false, true] {
        let (a, b) = if gridded_second {
            (second, first)
        } else {
            (first, second)
        };
        for start in find_start_points(a, b, options.tolerance, density)? {
            // find_start_points expresses params as (grid surface, projected
            // surface); normalise every start to (first, second).
            let start = if gridded_second {
                IntersectionPoint {
                    ua: start.ub,
                    va: start.vb,
                    ub: start.ua,
                    vb: start.va,
                    point: start.point,
                }
            } else {
                start
            };
            starts.push(start);
        }
    }
    // Reject tangential seeds outright: a start whose two surface normals are
    // (near-)parallel is on a graze, not a crossing, and marching it walks the
    // tangency band.
    starts.retain(|start| {
        match (
            first.surface.normal(start.ua, start.va),
            second.surface.normal(start.ub, start.vb),
        ) {
            (Ok(na), Ok(nb)) => na.cross(nb).length() > SUPPLEMENTAL_TRANSVERSE_CROSS,
            _ => false,
        }
    });

    let switches = TraceSwitches::from_env();
    let mut curves: Vec<SurfaceIntersectionCurve> = Vec::new();
    for start in starts {
        let claimed = curves.iter().any(|curve| {
            curve.points.windows(2).any(|segment| {
                point_segment_distance(start.point, segment[0], segment[1]) <= initial_step * 1.5
            })
        });
        if claimed {
            continue;
        }
        // Swallow trace-exhaustion here (unlike the common path, which errors
        // loudly): on this gated path a non-closing branch means the seed sat
        // on a tangency band, which we simply drop.
        let Ok(forward) = trace(
            first,
            second,
            start,
            1.0,
            options.tolerance,
            initial_step,
            minimum_step,
            maximum_step,
            maximum_steps,
            switches,
            options.span_budget,
        ) else {
            continue;
        };
        let (all, closed) = if forward.closed {
            (Spliced::from(forward), true)
        } else {
            let Ok(backward) = trace(
                first,
                second,
                start,
                -1.0,
                options.tolerance,
                initial_step,
                minimum_step,
                maximum_step,
                maximum_steps,
                switches,
                options.span_budget,
            ) else {
                continue;
            };
            (splice(backward, forward), false)
        };
        if all.points.len() < 2 {
            continue;
        }
        // Keep only a branch that is genuinely transverse somewhere along its
        // length — a final guard against a tangency-band polyline that happened
        // to close.
        let transverse = all.points.iter().step_by((all.points.len() / 5).max(1)).any(|point| {
            match (
                first.surface.normal(point.ua, point.va),
                second.surface.normal(point.ub, point.vb),
            ) {
                (Ok(na), Ok(nb)) => na.cross(nb).length() > SUPPLEMENTAL_TRANSVERSE_CROSS,
                _ => false,
            }
        });
        if !transverse {
            continue;
        }
        curves.push(curve_from(all, closed, options.span_budget.is_some()));
    }
    Ok(curves)
}