Module autoprogram 

Automatic programming (lane C13 rows 3 and 4): recognised features -> a setup’s ordered operations through the technology table, tools from the library, feeds from lane C12, generation through the existing strategies, program assembly, and the report of what was recognised, programmed and skipped.

Ordering: facing, roughing by descending cutter diameter, finishing (including chamfers), then holes: spotting, drilling, tapping/thread milling. Tool reuse is stable within a phase and cannot override roughing diameter or hole dependencies. Tool number and ID break ties deterministically.

Re-exports

pub use report::report;

pub use report::Report;

Modules

access

Protect open-edge extensions against the complete part above the floor.

binding

Durable identity of an automatically programmed feature. Geometry is refreshed from exact bodies after edits; a lost or ambiguous feature is refused rather than silently machining a different region.

multi

Additional fixed-axis setups are proposals, certified by fresh recognition. A refusal is never converted into machinable geometry by rotating its label.

report

The report for the UI (lane C13 row 4): what was recognised, what was programmed with which operations and tools, what was skipped and why, and how each generated operation ended.

Structs

AutoInput

What the planner reads.

GeneratedOperation

One operation’s generation outcome. Drilling keeps its canned cycles in toolpath and the expanded motions in expanded (for simulation).

Plan

PlannedOperation

Skipped

Enums

OperationGeometry

The geometry a planned operation is generated from.

Functions

cutter_of

The cutter of a planned operation’s tool (for simulation).

generate

Generate every planned operation through its strategy. Per-operation failures are recorded, not fatal; cancellation is.

plan

Plan the setup’s operations.

program_input

The program input of the generated operations (failed ones left out), ready for program::assemble and the posts.