use serde::Deserialize;
use serde::de::Unexpected;
use serde::de;
use serde::Deserializer;
use zigbee2mqtt_types_base_types::LastSeen;
/// third_reality:3RDS17BZ [zigbee2mqtt link](https://www.zigbee2mqtt.io/devices/3RDS17BZ.html)
///
/// 
#[cfg_attr(feature = "debug", derive(Debug))]
#[cfg_attr(feature = "clone", derive(Clone))]
#[derive(Deserialize)]
pub struct Zigbee3rds17bz {
    ///Remaining battery in %, can take up to 24 hours before reported.
    pub battery: f64,
    ///Zigbee herdsman description: "Indicates if the battery of this device is almost empty"
    ///Boolean values can be an unintuitive way round: value_on = true and value_off = false, consider double checking Zigbee2MQTT to understand what they mean
    pub battery_low: bool,
    ///Zigbee herdsman description: "Indicates if the contact is closed (= true) or open (= false)"
    ///Boolean values can be an unintuitive way round: value_on = false and value_off = true, consider double checking Zigbee2MQTT to understand what they mean
    pub contact: bool,
    ///Link quality (signal strength)
    pub linkquality: f64,
    ///Voltage of the battery in millivolts
    pub voltage: f64,
    /// Optional last_seen type, set as a global zigbee2mqtt setting
    pub last_seen: Option<LastSeen>,
    /// Optional elapsed type
    pub elapsed: Option<u64>,
}/// third_reality:3RMS16BZ [zigbee2mqtt link](https://www.zigbee2mqtt.io/devices/3RMS16BZ.html)
///
/// 
#[cfg_attr(feature = "debug", derive(Debug))]
#[cfg_attr(feature = "clone", derive(Clone))]
#[derive(Deserialize)]
pub struct Zigbee3rms16bz {
    ///Remaining battery in %, can take up to 24 hours before reported.
    pub battery: f64,
    ///Zigbee herdsman description: "Indicates if the battery of this device is almost empty"
    ///Boolean values can be an unintuitive way round: value_on = true and value_off = false, consider double checking Zigbee2MQTT to understand what they mean
    pub battery_low: bool,
    ///Link quality (signal strength)
    pub linkquality: f64,
    ///Zigbee herdsman description: "Indicates whether the device detected occupancy"
    ///Boolean values can be an unintuitive way round: value_on = true and value_off = false, consider double checking Zigbee2MQTT to understand what they mean
    pub occupancy: bool,
    ///Voltage of the battery in millivolts
    pub voltage: f64,
    /// Optional last_seen type, set as a global zigbee2mqtt setting
    pub last_seen: Option<LastSeen>,
    /// Optional elapsed type
    pub elapsed: Option<u64>,
}/// third_reality:3RSB015BZ [zigbee2mqtt link](https://www.zigbee2mqtt.io/devices/3RSB015BZ.html)
///
/// 
#[cfg_attr(feature = "debug", derive(Debug))]
#[cfg_attr(feature = "clone", derive(Clone))]
#[derive(Deserialize)]
pub struct Zigbee3rsb015bz {
    ///Remaining battery in %, can take up to 24 hours before reported.
    pub battery: f64,
    ///Link quality (signal strength)
    pub linkquality: f64,
    ///Position of this cover
    pub position: f64,
    pub state: Zigbee3rsb015bzState,
    /// Optional last_seen type, set as a global zigbee2mqtt setting
    pub last_seen: Option<LastSeen>,
    /// Optional elapsed type
    pub elapsed: Option<u64>,
}/// third_reality:3RSB22BZ [zigbee2mqtt link](https://www.zigbee2mqtt.io/devices/3RSB22BZ.html)
///
/// 
#[cfg_attr(feature = "debug", derive(Debug))]
#[cfg_attr(feature = "clone", derive(Clone))]
#[derive(Deserialize)]
pub struct Zigbee3rsb22bz {
    ///Triggered action (e.g. a button click)
    pub action: Zigbee3rsb22bzAction,
    ///Remaining battery in %, can take up to 24 hours before reported.
    pub battery: f64,
    ///Zigbee herdsman description: "Indicates if the battery of this device is almost empty"
    ///Boolean values can be an unintuitive way round: value_on = true and value_off = false, consider double checking Zigbee2MQTT to understand what they mean
    pub battery_low: bool,
    ///Link quality (signal strength)
    pub linkquality: f64,
    ///Voltage of the battery in millivolts
    pub voltage: f64,
    /// Optional last_seen type, set as a global zigbee2mqtt setting
    pub last_seen: Option<LastSeen>,
    /// Optional elapsed type
    pub elapsed: Option<u64>,
}/// third_reality:3RSL011Z [zigbee2mqtt link](https://www.zigbee2mqtt.io/devices/3RSL011Z.html)
///
/// 
#[cfg_attr(feature = "debug", derive(Debug))]
#[cfg_attr(feature = "clone", derive(Clone))]
#[derive(Deserialize)]
pub struct Zigbee3rsl011z {
    ///Brightness of this light
    pub brightness: f64,
    ///Color temperature of this light
    pub color_temp: f64,
    ///Color temperature after cold power on of this light
    pub color_temp_startup: f64,
    ///Link quality (signal strength)
    pub linkquality: f64,
    ///Controls the behavior when the device is powered on after power loss
    pub power_on_behavior: Zigbee3rsl011zPoweronbehavior,
    ///Zigbee herdsman description: "On/off state of this light"
    ///The string values get converted into boolean with: ON = true and OFF = false
    #[serde(deserialize_with = "zigbee3rsl011z_state_deserializer")]
    pub state: bool,
    /// Optional last_seen type, set as a global zigbee2mqtt setting
    pub last_seen: Option<LastSeen>,
    /// Optional elapsed type
    pub elapsed: Option<u64>,
}
/// Deserialize bool from String with custom value mapping
fn zigbee3rsl011z_state_deserializer<'de, D>(deserializer: D) -> Result<bool, D::Error>
where
    D: Deserializer<'de>,
{
    match String::deserialize(deserializer)?.as_ref() {
        "ON" => Ok(true),
        "OFF" => Ok(false),
        other => Err(de::Error::invalid_value(
            Unexpected::Str(other),
            &"Value expected was either ON or OFF",
        )),
    }
}

/// third_reality:3RSL012Z [zigbee2mqtt link](https://www.zigbee2mqtt.io/devices/3RSL012Z.html)
///
/// 
#[cfg_attr(feature = "debug", derive(Debug))]
#[cfg_attr(feature = "clone", derive(Clone))]
#[derive(Deserialize)]
pub struct Zigbee3rsl012z {
    ///Brightness of this light
    pub brightness: f64,
    ///Color temperature of this light
    pub color_temp: f64,
    ///Color temperature after cold power on of this light
    pub color_temp_startup: f64,
    ///Link quality (signal strength)
    pub linkquality: f64,
    ///Controls the behavior when the device is powered on after power loss
    pub power_on_behavior: Zigbee3rsl012zPoweronbehavior,
    ///Zigbee herdsman description: "On/off state of this light"
    ///The string values get converted into boolean with: ON = true and OFF = false
    #[serde(deserialize_with = "zigbee3rsl012z_state_deserializer")]
    pub state: bool,
    /// Optional last_seen type, set as a global zigbee2mqtt setting
    pub last_seen: Option<LastSeen>,
    /// Optional elapsed type
    pub elapsed: Option<u64>,
}
/// Deserialize bool from String with custom value mapping
fn zigbee3rsl012z_state_deserializer<'de, D>(deserializer: D) -> Result<bool, D::Error>
where
    D: Deserializer<'de>,
{
    match String::deserialize(deserializer)?.as_ref() {
        "ON" => Ok(true),
        "OFF" => Ok(false),
        other => Err(de::Error::invalid_value(
            Unexpected::Str(other),
            &"Value expected was either ON or OFF",
        )),
    }
}

/// third_reality:3RSP019BZ [zigbee2mqtt link](https://www.zigbee2mqtt.io/devices/3RSP019BZ.html)
///
/// 
#[cfg_attr(feature = "debug", derive(Debug))]
#[cfg_attr(feature = "clone", derive(Clone))]
#[derive(Deserialize)]
pub struct Zigbee3rsp019bz {
    ///Link quality (signal strength)
    pub linkquality: f64,
    ///Controls the behavior when the device is powered on after power loss
    pub power_on_behavior: Zigbee3rsp019bzPoweronbehavior,
    ///Zigbee herdsman description: "On/off state of the switch"
    ///The string values get converted into boolean with: ON = true and OFF = false
    #[serde(deserialize_with = "zigbee3rsp019bz_state_deserializer")]
    pub state: bool,
    /// Optional last_seen type, set as a global zigbee2mqtt setting
    pub last_seen: Option<LastSeen>,
    /// Optional elapsed type
    pub elapsed: Option<u64>,
}
/// Deserialize bool from String with custom value mapping
fn zigbee3rsp019bz_state_deserializer<'de, D>(deserializer: D) -> Result<bool, D::Error>
where
    D: Deserializer<'de>,
{
    match String::deserialize(deserializer)?.as_ref() {
        "ON" => Ok(true),
        "OFF" => Ok(false),
        other => Err(de::Error::invalid_value(
            Unexpected::Str(other),
            &"Value expected was either ON or OFF",
        )),
    }
}

/// third_reality:3RSP02028BZ [zigbee2mqtt link](https://www.zigbee2mqtt.io/devices/3RSP02028BZ.html)
///
/// 
#[cfg_attr(feature = "debug", derive(Debug))]
#[cfg_attr(feature = "clone", derive(Clone))]
#[derive(Deserialize)]
pub struct Zigbee3rsp02028bz {
    ///Measured electrical AC frequency
    pub ac_frequency: f64,
    ///Instantaneous measured electrical current
    pub current: f64,
    ///Sum of consumed energy
    pub energy: f64,
    ///Link quality (signal strength)
    pub linkquality: f64,
    ///Instantaneous measured power
    pub power: f64,
    ///Instantaneous measured power factor
    pub power_factor: f64,
    ///Zigbee herdsman description: "On/off state of the switch"
    ///The string values get converted into boolean with: ON = true and OFF = false
    #[serde(deserialize_with = "zigbee3rsp02028bz_state_deserializer")]
    pub state: bool,
    ///Measured electrical potential value
    pub voltage: f64,
    /// Optional last_seen type, set as a global zigbee2mqtt setting
    pub last_seen: Option<LastSeen>,
    /// Optional elapsed type
    pub elapsed: Option<u64>,
}
/// Deserialize bool from String with custom value mapping
fn zigbee3rsp02028bz_state_deserializer<'de, D>(deserializer: D) -> Result<bool, D::Error>
where
    D: Deserializer<'de>,
{
    match String::deserialize(deserializer)?.as_ref() {
        "ON" => Ok(true),
        "OFF" => Ok(false),
        other => Err(de::Error::invalid_value(
            Unexpected::Str(other),
            &"Value expected was either ON or OFF",
        )),
    }
}

/// third_reality:3RSS007Z [zigbee2mqtt link](https://www.zigbee2mqtt.io/devices/3RSS007Z.html)
///
/// 
#[cfg_attr(feature = "debug", derive(Debug))]
#[cfg_attr(feature = "clone", derive(Clone))]
#[derive(Deserialize)]
pub struct Zigbee3rss007z {
    ///Link quality (signal strength)
    pub linkquality: f64,
    ///Controls the behavior when the device is powered on after power loss
    pub power_on_behavior: Zigbee3rss007zPoweronbehavior,
    ///Zigbee herdsman description: "On/off state of the switch"
    ///The string values get converted into boolean with: ON = true and OFF = false
    #[serde(deserialize_with = "zigbee3rss007z_state_deserializer")]
    pub state: bool,
    /// Optional last_seen type, set as a global zigbee2mqtt setting
    pub last_seen: Option<LastSeen>,
    /// Optional elapsed type
    pub elapsed: Option<u64>,
}
/// Deserialize bool from String with custom value mapping
fn zigbee3rss007z_state_deserializer<'de, D>(deserializer: D) -> Result<bool, D::Error>
where
    D: Deserializer<'de>,
{
    match String::deserialize(deserializer)?.as_ref() {
        "ON" => Ok(true),
        "OFF" => Ok(false),
        other => Err(de::Error::invalid_value(
            Unexpected::Str(other),
            &"Value expected was either ON or OFF",
        )),
    }
}

/// third_reality:3RSS008Z [zigbee2mqtt link](https://www.zigbee2mqtt.io/devices/3RSS008Z.html)
///
/// 
#[cfg_attr(feature = "debug", derive(Debug))]
#[cfg_attr(feature = "clone", derive(Clone))]
#[derive(Deserialize)]
pub struct Zigbee3rss008z {
    ///Remaining battery in %, can take up to 24 hours before reported.
    pub battery: f64,
    ///Link quality (signal strength)
    pub linkquality: f64,
    ///Zigbee herdsman description: "On/off state of the switch"
    ///The string values get converted into boolean with: ON = true and OFF = false
    #[serde(deserialize_with = "zigbee3rss008z_state_deserializer")]
    pub state: bool,
    ///Voltage of the battery in millivolts
    pub voltage: f64,
    /// Optional last_seen type, set as a global zigbee2mqtt setting
    pub last_seen: Option<LastSeen>,
    /// Optional elapsed type
    pub elapsed: Option<u64>,
}
/// Deserialize bool from String with custom value mapping
fn zigbee3rss008z_state_deserializer<'de, D>(deserializer: D) -> Result<bool, D::Error>
where
    D: Deserializer<'de>,
{
    match String::deserialize(deserializer)?.as_ref() {
        "ON" => Ok(true),
        "OFF" => Ok(false),
        other => Err(de::Error::invalid_value(
            Unexpected::Str(other),
            &"Value expected was either ON or OFF",
        )),
    }
}

/// third_reality:3RSS009Z [zigbee2mqtt link](https://www.zigbee2mqtt.io/devices/3RSS009Z.html)
///
/// 
#[cfg_attr(feature = "debug", derive(Debug))]
#[cfg_attr(feature = "clone", derive(Clone))]
#[derive(Deserialize)]
pub struct Zigbee3rss009z {
    ///Remaining battery in %, can take up to 24 hours before reported.
    pub battery: f64,
    ///Link quality (signal strength)
    pub linkquality: f64,
    ///Zigbee herdsman description: "On/off state of the switch"
    ///The string values get converted into boolean with: ON = true and OFF = false
    #[serde(deserialize_with = "zigbee3rss009z_state_deserializer")]
    pub state: bool,
    ///Voltage of the battery in millivolts
    pub voltage: f64,
    /// Optional last_seen type, set as a global zigbee2mqtt setting
    pub last_seen: Option<LastSeen>,
    /// Optional elapsed type
    pub elapsed: Option<u64>,
}
/// Deserialize bool from String with custom value mapping
fn zigbee3rss009z_state_deserializer<'de, D>(deserializer: D) -> Result<bool, D::Error>
where
    D: Deserializer<'de>,
{
    match String::deserialize(deserializer)?.as_ref() {
        "ON" => Ok(true),
        "OFF" => Ok(false),
        other => Err(de::Error::invalid_value(
            Unexpected::Str(other),
            &"Value expected was either ON or OFF",
        )),
    }
}

/// third_reality:3RTHS24BZ [zigbee2mqtt link](https://www.zigbee2mqtt.io/devices/3RTHS24BZ.html)
///
/// 
#[cfg_attr(feature = "debug", derive(Debug))]
#[cfg_attr(feature = "clone", derive(Clone))]
#[derive(Deserialize)]
pub struct Zigbee3rths24bz {
    ///Remaining battery in %, can take up to 24 hours before reported.
    pub battery: f64,
    ///Measured relative humidity
    pub humidity: f64,
    ///Link quality (signal strength)
    pub linkquality: f64,
    ///Measured temperature value
    pub temperature: f64,
    ///Voltage of the battery in millivolts
    pub voltage: f64,
    /// Optional last_seen type, set as a global zigbee2mqtt setting
    pub last_seen: Option<LastSeen>,
    /// Optional elapsed type
    pub elapsed: Option<u64>,
}/// third_reality:3RWS18BZ [zigbee2mqtt link](https://www.zigbee2mqtt.io/devices/3RWS18BZ.html)
///
/// 
#[cfg_attr(feature = "debug", derive(Debug))]
#[cfg_attr(feature = "clone", derive(Clone))]
#[derive(Deserialize)]
pub struct Zigbee3rws18bz {
    ///Remaining battery in %, can take up to 24 hours before reported.
    pub battery: f64,
    ///Zigbee herdsman description: "Indicates if the battery of this device is almost empty"
    ///Boolean values can be an unintuitive way round: value_on = true and value_off = false, consider double checking Zigbee2MQTT to understand what they mean
    pub battery_low: bool,
    ///Link quality (signal strength)
    pub linkquality: f64,
    ///Voltage of the battery in millivolts
    pub voltage: f64,
    ///Zigbee herdsman description: "Indicates whether the device detected a water leak"
    ///Boolean values can be an unintuitive way round: value_on = true and value_off = false, consider double checking Zigbee2MQTT to understand what they mean
    pub water_leak: bool,
    /// Optional last_seen type, set as a global zigbee2mqtt setting
    pub last_seen: Option<LastSeen>,
    /// Optional elapsed type
    pub elapsed: Option<u64>,
}
#[cfg_attr(feature = "debug", derive(Debug))]
#[cfg_attr(feature = "clone", derive(Clone))]
#[derive(Deserialize, PartialEq)]
pub enum Zigbee3rsb015bzState {
    #[serde(rename = "CLOSE")]
    Close,
    #[serde(rename = "OPEN")]
    Open,
    #[serde(rename = "STOP")]
    Stop,
}
#[cfg_attr(feature = "debug", derive(Debug))]
#[cfg_attr(feature = "clone", derive(Clone))]
#[derive(Deserialize, PartialEq)]
pub enum Zigbee3rsb22bzAction {
    #[serde(rename = "double")]
    Double,
    #[serde(rename = "long")]
    Long,
    #[serde(rename = "single")]
    Single,
}
#[cfg_attr(feature = "debug", derive(Debug))]
#[cfg_attr(feature = "clone", derive(Clone))]
#[derive(Deserialize, PartialEq)]
pub enum Zigbee3rsl011zPoweronbehavior {
    #[serde(rename = "off")]
    Off,
    #[serde(rename = "on")]
    On,
    #[serde(rename = "previous")]
    Previous,
    #[serde(rename = "toggle")]
    Toggle,
}
#[cfg_attr(feature = "debug", derive(Debug))]
#[cfg_attr(feature = "clone", derive(Clone))]
#[derive(Deserialize, PartialEq)]
pub enum Zigbee3rsl012zPoweronbehavior {
    #[serde(rename = "off")]
    Off,
    #[serde(rename = "on")]
    On,
    #[serde(rename = "previous")]
    Previous,
    #[serde(rename = "toggle")]
    Toggle,
}
#[cfg_attr(feature = "debug", derive(Debug))]
#[cfg_attr(feature = "clone", derive(Clone))]
#[derive(Deserialize, PartialEq)]
pub enum Zigbee3rsp019bzPoweronbehavior {
    #[serde(rename = "off")]
    Off,
    #[serde(rename = "on")]
    On,
    #[serde(rename = "previous")]
    Previous,
    #[serde(rename = "toggle")]
    Toggle,
}
#[cfg_attr(feature = "debug", derive(Debug))]
#[cfg_attr(feature = "clone", derive(Clone))]
#[derive(Deserialize, PartialEq)]
pub enum Zigbee3rss007zPoweronbehavior {
    #[serde(rename = "off")]
    Off,
    #[serde(rename = "on")]
    On,
    #[serde(rename = "previous")]
    Previous,
    #[serde(rename = "toggle")]
    Toggle,
}
#[cfg(all(feature = "last_seen_epoch", feature = "last_seen_iso_8601"))]
compile_error!{"Feature last_seen epoch and iso_8601 are mutually exclusive and cannot be enabled together.
This was done because it is a global setting in zigbee2mqtt and therefor can't see a reason both would be enabled.
If you have a any reason to have both ways enabled please submit an issue to https://gitlab.com/seam345/zigbee2mqtt-types/-/issues"}