#[doc = "Register `DTSCON` reader"]
pub type R = crate::R<DtsconSpec>;
#[doc = "Register `DTSCON` writer"]
pub type W = crate::W<DtsconSpec>;
#[doc = "Sensor Power Down\n\nValue on reset: 1"]
#[derive(Clone, Copy, Debug, PartialEq, Eq)]
pub enum Pwd {
#[doc = "0: The DTS is powered"]
Value1 = 0,
#[doc = "1: The DTS is not powered"]
Value2 = 1,
}
impl From<Pwd> for bool {
#[inline(always)]
fn from(variant: Pwd) -> Self {
variant as u8 != 0
}
}
#[doc = "Field `PWD` reader - Sensor Power Down"]
pub type PwdR = crate::BitReader<Pwd>;
impl PwdR {
#[doc = "Get enumerated values variant"]
#[inline(always)]
pub const fn variant(&self) -> Pwd {
match self.bits {
false => Pwd::Value1,
true => Pwd::Value2,
}
}
#[doc = "The DTS is powered"]
#[inline(always)]
pub fn is_value1(&self) -> bool {
*self == Pwd::Value1
}
#[doc = "The DTS is not powered"]
#[inline(always)]
pub fn is_value2(&self) -> bool {
*self == Pwd::Value2
}
}
#[doc = "Field `PWD` writer - Sensor Power Down"]
pub type PwdW<'a, REG> = crate::BitWriter<'a, REG, Pwd>;
impl<'a, REG> PwdW<'a, REG>
where
REG: crate::Writable + crate::RegisterSpec,
{
#[doc = "The DTS is powered"]
#[inline(always)]
pub fn value1(self) -> &'a mut crate::W<REG> {
self.variant(Pwd::Value1)
}
#[doc = "The DTS is not powered"]
#[inline(always)]
pub fn value2(self) -> &'a mut crate::W<REG> {
self.variant(Pwd::Value2)
}
}
#[doc = "Sensor Measurement Start\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq, Eq)]
pub enum Start {
#[doc = "0: No DTS measurement is started"]
Value1 = 0,
#[doc = "1: A DTS measurement is started"]
Value2 = 1,
}
impl From<Start> for bool {
#[inline(always)]
fn from(variant: Start) -> Self {
variant as u8 != 0
}
}
#[doc = "Field `START` writer - Sensor Measurement Start"]
pub type StartW<'a, REG> = crate::BitWriter<'a, REG, Start>;
impl<'a, REG> StartW<'a, REG>
where
REG: crate::Writable + crate::RegisterSpec,
{
#[doc = "No DTS measurement is started"]
#[inline(always)]
pub fn value1(self) -> &'a mut crate::W<REG> {
self.variant(Start::Value1)
}
#[doc = "A DTS measurement is started"]
#[inline(always)]
pub fn value2(self) -> &'a mut crate::W<REG> {
self.variant(Start::Value2)
}
}
#[doc = "Field `OFFSET` reader - Offset Calibration Value"]
pub type OffsetR = crate::FieldReader;
#[doc = "Field `OFFSET` writer - Offset Calibration Value"]
pub type OffsetW<'a, REG> = crate::FieldWriter<'a, REG, 7>;
#[doc = "Field `GAIN` reader - Gain Calibration Value"]
pub type GainR = crate::FieldReader;
#[doc = "Field `GAIN` writer - Gain Calibration Value"]
pub type GainW<'a, REG> = crate::FieldWriter<'a, REG, 6>;
#[doc = "Field `REFTRIM` reader - Reference Trim Calibration Value"]
pub type ReftrimR = crate::FieldReader;
#[doc = "Field `REFTRIM` writer - Reference Trim Calibration Value"]
pub type ReftrimW<'a, REG> = crate::FieldWriter<'a, REG, 3>;
#[doc = "Field `BGTRIM` reader - Bandgap Trim Calibration Value"]
pub type BgtrimR = crate::FieldReader;
#[doc = "Field `BGTRIM` writer - Bandgap Trim Calibration Value"]
pub type BgtrimW<'a, REG> = crate::FieldWriter<'a, REG, 4>;
impl R {
#[doc = "Bit 0 - Sensor Power Down"]
#[inline(always)]
pub fn pwd(&self) -> PwdR {
PwdR::new((self.bits & 1) != 0)
}
#[doc = "Bits 4:10 - Offset Calibration Value"]
#[inline(always)]
pub fn offset(&self) -> OffsetR {
OffsetR::new(((self.bits >> 4) & 0x7f) as u8)
}
#[doc = "Bits 11:16 - Gain Calibration Value"]
#[inline(always)]
pub fn gain(&self) -> GainR {
GainR::new(((self.bits >> 11) & 0x3f) as u8)
}
#[doc = "Bits 17:19 - Reference Trim Calibration Value"]
#[inline(always)]
pub fn reftrim(&self) -> ReftrimR {
ReftrimR::new(((self.bits >> 17) & 7) as u8)
}
#[doc = "Bits 20:23 - Bandgap Trim Calibration Value"]
#[inline(always)]
pub fn bgtrim(&self) -> BgtrimR {
BgtrimR::new(((self.bits >> 20) & 0x0f) as u8)
}
}
impl W {
#[doc = "Bit 0 - Sensor Power Down"]
#[inline(always)]
#[must_use]
pub fn pwd(&mut self) -> PwdW<DtsconSpec> {
PwdW::new(self, 0)
}
#[doc = "Bit 1 - Sensor Measurement Start"]
#[inline(always)]
#[must_use]
pub fn start(&mut self) -> StartW<DtsconSpec> {
StartW::new(self, 1)
}
#[doc = "Bits 4:10 - Offset Calibration Value"]
#[inline(always)]
#[must_use]
pub fn offset(&mut self) -> OffsetW<DtsconSpec> {
OffsetW::new(self, 4)
}
#[doc = "Bits 11:16 - Gain Calibration Value"]
#[inline(always)]
#[must_use]
pub fn gain(&mut self) -> GainW<DtsconSpec> {
GainW::new(self, 11)
}
#[doc = "Bits 17:19 - Reference Trim Calibration Value"]
#[inline(always)]
#[must_use]
pub fn reftrim(&mut self) -> ReftrimW<DtsconSpec> {
ReftrimW::new(self, 17)
}
#[doc = "Bits 20:23 - Bandgap Trim Calibration Value"]
#[inline(always)]
#[must_use]
pub fn bgtrim(&mut self) -> BgtrimW<DtsconSpec> {
BgtrimW::new(self, 20)
}
}
#[doc = "Die Temperature Sensor Control Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`dtscon::R`](R). You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`dtscon::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
pub struct DtsconSpec;
impl crate::RegisterSpec for DtsconSpec {
type Ux = u32;
}
#[doc = "`read()` method returns [`dtscon::R`](R) reader structure"]
impl crate::Readable for DtsconSpec {}
#[doc = "`write(|w| ..)` method takes [`dtscon::W`](W) writer structure"]
impl crate::Writable for DtsconSpec {
type Safety = crate::Unsafe;
const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
}
#[doc = "`reset()` method sets DTSCON to value 0x01"]
impl crate::Resettable for DtsconSpec {
const RESET_VALUE: u32 = 0x01;
}