Expand description
EBU Bus Write Configuration Register
Structs§
- EBU Bus Write Configuration Register
Enums§
- Asynchronous Address phase:
- Byte Control Signal Control
- Early Burst Signal Enable for Synchronous Burst
- Early Chip Select for Synchronous Burst
- Synchronous burst buffer mode select
- Burst Length for Synchronous Burst
- Lock Chip Select
- Reversed polarity at WAIT
Type Aliases§
- Field
AAP
reader - Asynchronous Address phase: - Field
AAP
writer - Asynchronous Address phase: - Field
AGEN
reader - Device Type for Region - Field
AGEN
writer - Device Type for Region - Field
BCGEN
reader - Byte Control Signal Control - Field
BCGEN
writer - Byte Control Signal Control - Field
EBSE
reader - Early Burst Signal Enable for Synchronous Burst - Field
EBSE
writer - Early Burst Signal Enable for Synchronous Burst - Field
ECSE
reader - Early Chip Select for Synchronous Burst - Field
ECSE
writer - Early Chip Select for Synchronous Burst - Field
FBBMSEL
reader - Synchronous burst buffer mode select - Field
FBBMSEL
writer - Synchronous burst buffer mode select - Field
FETBLEN
reader - Burst Length for Synchronous Burst - Field
FETBLEN
writer - Burst Length for Synchronous Burst - Field
LOCKCS
reader - Lock Chip Select - Field
LOCKCS
writer - Lock Chip Select - Field
NAA
reader - Enable flash non-array access workaround - Field
PORTW
reader - Device Addressing Mode - Register
BUSWCON3
reader - Register
BUSWCON3
writer - Field
WAITINV
reader - Reversed polarity at WAIT - Field
WAITINV
writer - Reversed polarity at WAIT - Field
WAIT
reader - External Wait Control: 0=OFF (default after reset)., 1=Asynchronous input at WAIT., 2=Synchronous input at WAIT., 3=reserved., 0=OFF (default after reset)., 1=Wait for page load (Early WAIT)., 2=Wait for page load (WAIT with data)., 3=Abort and retry access., - Field
WAIT
writer - External Wait Control: 0=OFF (default after reset)., 1=Asynchronous input at WAIT., 2=Synchronous input at WAIT., 3=reserved., 0=OFF (default after reset)., 1=Wait for page load (Early WAIT)., 2=Wait for page load (WAIT with data)., 3=Abort and retry access.,