Module wio_lite_mg126::gpio

source · [−]

Expand description

GPIO

The GPIO module is used to configure GPIO pins through the PORT interface.

There are currently two versions of the GPIO module. The inital GPIO API used a macro-heavy implementation, and it contained a few mistakes. The discussion in issue #214 spurred the creation of a new module with fewer macros and a corrected, refactored API.

The new module is provided in v2. The old module was removed, but a compatibility shim is provided in v1 to support existing code. Users should expect to eventually migrate to v2.

Errors in `v1`

v2 fixes a number of errors in v1:

v1 implements an open-drain output mode, but SAMD chips do not have open-drain outputs. There is (almost) no mention of “open-drain” anywhere in the datasheets. In fact, the SAMD21 datasheet notes a removal of the term in Rev. E. Open-drain outputs have been has been removed in v2.
v1 allows users to enable a pull-up resistor while in an output mode, but this is not possible for SAMD chips. There is no corresponding entry in the “Pin Configurations Summary” table in any of the three datasheets. Moreover, when a pull resistor is enabled for inputs, its direction is set using the OUT bit, which would not be possible in an output mode.
v1 does not implement any of the disabled pin modes, i.e. when both DIR and INEN are 0. As a consequence, the state of v1 pins at reset is incorrect. v1 assumes they are in floating input mode, but they are actually in floating disabled mode.

New features

The v2 module has several new features:

Converting between pin modes no longer requires access to the Port type.

For example, the follow code in v1,

let pins = peripherals.PORT.split();
let pa8 = pins.pa8.into_push_pull_output(&mut pins.port);

would look like this in v2.

let pins = v2::Pins::new(peripherals.PORT);
let pa08 = pins.pa08.into_push_pull_output();

As a consequence, pin mode conversions can now be implemented using From/Into.

let pins = Pins::new(peripherals.PORT);
let pa08: Pin<PA08, PushPullOutput> = pins.pa08.into();

v2 defines a new AnyPin trait that can be used to simplify function arguments and reduce the number of type parameters required when dealing with GPIO pins.
v2 offers a type-erased, DynPin type, for run-time tracking of pins.
v2 provides a new bsp_pins macro to help BSP authors provide meaningful names and type aliases for their GPIO pins.

Compatibility

The original v1 module has been removed. It has been replaced with a compatibility shim to support existing code. The shim implements all v1 pin types in terms of v2::Pin. In fact, it declares its own v1::Pin type as a newtype wrapper around a v2::Pin, and it defines the individual Pa0, Pa1, etc. pin types as type aliases of the new v1::Pin type.

As a consequence, it is easy to define the conversion between a v1::Pin and its corresponding v2::Pin using From/Into.

let pins = peripherals.PORT.split();
let pa8: v1::Pa8<_> = pins.pa8;
let pa08 = v2::Pin<_, _> = pa8.into();

Moreover, all v1::Pin and v2::Pin types implement the AnyPin trait, which is particularly useful for supporting both module versions simultaneously. See the AnyPin documentation for more details.

/// Take the v1 or v2 representation of pin PA08, in any mode, then convert
/// it to a push-pull output and set it high
fn example(pin: impl AnyPin<Id = PA08>) {
    let mut pin = pin.into().into_push_pull_output();
    pin.set_high().ok();
}

Modules

v1Deprecated

Version 1 of the GPIO module

v2

Version 2 of the GPIO module

Structs

PartsDeprecated

Holds the GPIO Port peripheral and broken out pin instances

PinDeprecated

Represents a GPIO pin with a corresponding PinId and PinMode

PortDeprecated

Opaque port reference

Traits

GpioExtDeprecated

The GpioExt trait allows splitting the PORT hardware into its constituent pin parts.

IntoFunctionDeprecated

A trait that makes it easier to generically manage converting a pin from its current state into some other functional mode. The configuration change requires exclusive access to the Port hardware, which is why this isn’t simply the standard Into trait.

PinId

Type-level enum for pin IDs

PinMode

Type-level enum representing pin modes

Type Definitions

FloatingDeprecated

Floating Input

InputDeprecated

Represents a pin configured for input. The MODE type is typically one of Floating, PullDown or PullUp.

InterruptDeprecated

Represents a pin configured for interrupt. The MODE type is one of Floating, PullDown or PullUp.

OpenDrainDeprecated

Open drain output. The SAMD5x/E5x chips don’t actually have open drain outputs. This option was added by mistake. It is currently an alias of PushPull

OutputDeprecated

Represents a pin configured for output. The MODE type is typically one of PushPull, or OpenDrain.

Pa0Deprecated