1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33
//! //! # Glossary //! //! | Term | Description | More Info | //! |--------|-------------|-----------| //! | ZLP | Zero length packet. Used to terminate the current data transfer when the final packet is full and the total data length is less than the header specified | Section 5.5.3 [USB 2.0 Bus Spec][USB2Bus] | //! | CBW | Command block wrapper. Header that contains information about the data that is expected to be sent/received next | Section 5.1 [USB Bulk Only Transport Spec][USBBot] | //! | CSW | Command status wrapper. Status sent after data transfer to indicate success/failure and confirm length of data sent | Section 5.2 [USB Bulk Only Transport Spec][USBBot] | //! | Data Residue | Data residue (bytes) is the difference in the length requested in the CBW and the actual amount of data sent/received | Section 5.2 [USB Bulk Only Transport Spec][USBBot] | //! //! [USB2Bus]: https://www.usb.org/document-library/usb-20-specification //! [USBBot]: https://www.usb.org/document-library/mass-storage-bulk-only-10 //! #![no_std] mod msc; mod interface_subclass; mod interface_protocol; pub use usb_device::{Result, UsbError}; pub use msc::*; pub use interface_subclass::*; pub use interface_protocol::*; mod logging { pub use itm_logger::*; #[cfg(feature = "trace-usb-control")] pub use itm_logger::trace as trace_usb_control; #[cfg(not(feature = "trace-usb-control"))] pub use itm_logger::stub as trace_usb_control; }