1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 1311 1312 1313 1314 1315 1316 1317 1318 1319 1320 1321 1322 1323 1324 1325 1326 1327 1328 1329 1330 1331 1332 1333 1334 1335 1336 1337 1338 1339 1340 1341 1342 1343 1344 1345 1346 1347 1348 1349 1350 1351 1352 1353 1354 1355 1356 1357 1358 1359 1360 1361 1362 1363 1364 1365 1366 1367 1368 1369 1370 1371 1372 1373 1374 1375 1376 1377 1378 1379 1380 1381 1382 1383 1384 1385 1386 1387 1388 1389 1390 1391 1392 1393 1394 1395 1396 1397 1398 1399 1400 1401 1402 1403 1404 1405 1406 1407 1408 1409 1410 1411 1412 1413 1414 1415 1416 1417 1418 1419 1420 1421 1422 1423 1424 1425 1426 1427 1428 1429 1430 1431 1432 1433 1434 1435 1436 1437 1438 1439 1440 1441 1442 1443 1444 1445 1446 1447 1448 1449 1450 1451 1452 1453 1454 1455 1456 1457 1458 1459 1460 1461 1462 1463 1464 1465 1466 1467 1468 1469 1470 1471 1472 1473 1474 1475 1476 1477 1478 1479 1480 1481 1482 1483 1484 1485 1486 1487 1488 1489 1490 1491 1492 1493 1494 1495 1496 1497 1498 1499 1500 1501 1502 1503 1504 1505 1506 1507 1508 1509 1510 1511 1512 1513 1514 1515 1516 1517 1518 1519 1520 1521 1522 1523 1524 1525 1526 1527 1528 1529 1530 1531 1532 1533 1534 1535 1536 1537 1538 1539 1540 1541 1542 1543 1544 1545 1546 1547 1548 1549 1550 1551 1552 1553 1554 1555 1556 1557 1558 1559 1560 1561 1562 1563 1564 1565 1566 1567 1568 1569 1570 1571 1572 1573 1574 1575 1576 1577 1578 1579 1580 1581 1582 1583 1584 1585 1586 1587 1588 1589 1590 1591 1592 1593 1594 1595 1596 1597 1598 1599 1600 1601 1602 1603 1604 1605 1606 1607 1608 1609 1610 1611 1612 1613 1614 1615 1616 1617 1618 1619 1620 1621 1622 1623 1624 1625 1626 1627 1628 1629 1630 1631 1632 1633 1634 1635 1636 1637 1638 1639 1640 1641 1642 1643 1644 1645 1646 1647 1648 1649 1650 1651 1652 1653 1654 1655 1656 1657 1658 1659 1660 1661 1662 1663 1664 1665 1666 1667 1668 1669 1670 1671 1672 1673 1674 1675 1676 1677 1678 1679 1680 1681 1682 1683 1684 1685 1686 1687 1688 1689 1690 1691 1692 1693 1694 1695 1696 1697 1698 1699 1700 1701 1702 1703 1704 1705 1706 1707 1708 1709 1710
/* ***********************************************************
* This file was automatically generated on 2024-02-27. *
* *
* Rust Bindings Version 2.0.21 *
* *
* If you have a bugfix for this file and want to commit it, *
* please fix the bug in the generator. You can find a link *
* to the generators git repository on tinkerforge.com *
*************************************************************/
//! Silently drives one bipolar stepper motor with up to 46V and 1.6A per phase.
//!
//! See also the documentation [here](https://www.tinkerforge.com/en/doc/Software/Bricklets/SilentStepperV2_Bricklet_Rust.html).
use crate::{
byte_converter::*, converting_callback_receiver::ConvertingCallbackReceiver, converting_receiver::ConvertingReceiver, device::*,
ip_connection::GetRequestSender,
};
pub enum SilentStepperV2BrickletFunction {
SetMaxVelocity,
GetMaxVelocity,
GetCurrentVelocity,
SetSpeedRamping,
GetSpeedRamping,
FullBrake,
SetCurrentPosition,
GetCurrentPosition,
SetTargetPosition,
GetTargetPosition,
SetSteps,
GetSteps,
GetRemainingSteps,
SetStepConfiguration,
GetStepConfiguration,
DriveForward,
DriveBackward,
Stop,
GetInputVoltage,
SetMotorCurrent,
GetMotorCurrent,
SetEnabled,
GetEnabled,
SetBasicConfiguration,
GetBasicConfiguration,
SetSpreadcycleConfiguration,
GetSpreadcycleConfiguration,
SetStealthConfiguration,
GetStealthConfiguration,
SetCoolstepConfiguration,
GetCoolstepConfiguration,
SetMiscConfiguration,
GetMiscConfiguration,
SetErrorLedConfig,
GetErrorLedConfig,
GetDriverStatus,
SetMinimumVoltage,
GetMinimumVoltage,
SetTimeBase,
GetTimeBase,
GetAllData,
SetAllCallbackConfiguration,
GetAllDataCallbackConfiguraton,
SetGpioConfiguration,
GetGpioConfiguration,
SetGpioAction,
GetGpioAction,
GetGpioState,
GetSpitfpErrorCount,
SetBootloaderMode,
GetBootloaderMode,
SetWriteFirmwarePointer,
WriteFirmware,
SetStatusLedConfig,
GetStatusLedConfig,
GetChipTemperature,
Reset,
WriteUid,
ReadUid,
GetIdentity,
CallbackUnderVoltage,
CallbackPositionReached,
CallbackAllData,
CallbackNewState,
CallbackGpioState,
}
impl From<SilentStepperV2BrickletFunction> for u8 {
fn from(fun: SilentStepperV2BrickletFunction) -> Self {
match fun {
SilentStepperV2BrickletFunction::SetMaxVelocity => 1,
SilentStepperV2BrickletFunction::GetMaxVelocity => 2,
SilentStepperV2BrickletFunction::GetCurrentVelocity => 3,
SilentStepperV2BrickletFunction::SetSpeedRamping => 4,
SilentStepperV2BrickletFunction::GetSpeedRamping => 5,
SilentStepperV2BrickletFunction::FullBrake => 6,
SilentStepperV2BrickletFunction::SetCurrentPosition => 7,
SilentStepperV2BrickletFunction::GetCurrentPosition => 8,
SilentStepperV2BrickletFunction::SetTargetPosition => 9,
SilentStepperV2BrickletFunction::GetTargetPosition => 10,
SilentStepperV2BrickletFunction::SetSteps => 11,
SilentStepperV2BrickletFunction::GetSteps => 12,
SilentStepperV2BrickletFunction::GetRemainingSteps => 13,
SilentStepperV2BrickletFunction::SetStepConfiguration => 14,
SilentStepperV2BrickletFunction::GetStepConfiguration => 15,
SilentStepperV2BrickletFunction::DriveForward => 16,
SilentStepperV2BrickletFunction::DriveBackward => 17,
SilentStepperV2BrickletFunction::Stop => 18,
SilentStepperV2BrickletFunction::GetInputVoltage => 19,
SilentStepperV2BrickletFunction::SetMotorCurrent => 22,
SilentStepperV2BrickletFunction::GetMotorCurrent => 23,
SilentStepperV2BrickletFunction::SetEnabled => 24,
SilentStepperV2BrickletFunction::GetEnabled => 25,
SilentStepperV2BrickletFunction::SetBasicConfiguration => 26,
SilentStepperV2BrickletFunction::GetBasicConfiguration => 27,
SilentStepperV2BrickletFunction::SetSpreadcycleConfiguration => 28,
SilentStepperV2BrickletFunction::GetSpreadcycleConfiguration => 29,
SilentStepperV2BrickletFunction::SetStealthConfiguration => 30,
SilentStepperV2BrickletFunction::GetStealthConfiguration => 31,
SilentStepperV2BrickletFunction::SetCoolstepConfiguration => 32,
SilentStepperV2BrickletFunction::GetCoolstepConfiguration => 33,
SilentStepperV2BrickletFunction::SetMiscConfiguration => 34,
SilentStepperV2BrickletFunction::GetMiscConfiguration => 35,
SilentStepperV2BrickletFunction::SetErrorLedConfig => 36,
SilentStepperV2BrickletFunction::GetErrorLedConfig => 37,
SilentStepperV2BrickletFunction::GetDriverStatus => 38,
SilentStepperV2BrickletFunction::SetMinimumVoltage => 39,
SilentStepperV2BrickletFunction::GetMinimumVoltage => 40,
SilentStepperV2BrickletFunction::SetTimeBase => 43,
SilentStepperV2BrickletFunction::GetTimeBase => 44,
SilentStepperV2BrickletFunction::GetAllData => 45,
SilentStepperV2BrickletFunction::SetAllCallbackConfiguration => 46,
SilentStepperV2BrickletFunction::GetAllDataCallbackConfiguraton => 47,
SilentStepperV2BrickletFunction::SetGpioConfiguration => 48,
SilentStepperV2BrickletFunction::GetGpioConfiguration => 49,
SilentStepperV2BrickletFunction::SetGpioAction => 50,
SilentStepperV2BrickletFunction::GetGpioAction => 51,
SilentStepperV2BrickletFunction::GetGpioState => 52,
SilentStepperV2BrickletFunction::GetSpitfpErrorCount => 234,
SilentStepperV2BrickletFunction::SetBootloaderMode => 235,
SilentStepperV2BrickletFunction::GetBootloaderMode => 236,
SilentStepperV2BrickletFunction::SetWriteFirmwarePointer => 237,
SilentStepperV2BrickletFunction::WriteFirmware => 238,
SilentStepperV2BrickletFunction::SetStatusLedConfig => 239,
SilentStepperV2BrickletFunction::GetStatusLedConfig => 240,
SilentStepperV2BrickletFunction::GetChipTemperature => 242,
SilentStepperV2BrickletFunction::Reset => 243,
SilentStepperV2BrickletFunction::WriteUid => 248,
SilentStepperV2BrickletFunction::ReadUid => 249,
SilentStepperV2BrickletFunction::GetIdentity => 255,
SilentStepperV2BrickletFunction::CallbackUnderVoltage => 41,
SilentStepperV2BrickletFunction::CallbackPositionReached => 42,
SilentStepperV2BrickletFunction::CallbackAllData => 53,
SilentStepperV2BrickletFunction::CallbackNewState => 54,
SilentStepperV2BrickletFunction::CallbackGpioState => 55,
}
}
}
pub const SILENT_STEPPER_V2_BRICKLET_STEP_RESOLUTION_1: u8 = 8;
pub const SILENT_STEPPER_V2_BRICKLET_STEP_RESOLUTION_2: u8 = 7;
pub const SILENT_STEPPER_V2_BRICKLET_STEP_RESOLUTION_4: u8 = 6;
pub const SILENT_STEPPER_V2_BRICKLET_STEP_RESOLUTION_8: u8 = 5;
pub const SILENT_STEPPER_V2_BRICKLET_STEP_RESOLUTION_16: u8 = 4;
pub const SILENT_STEPPER_V2_BRICKLET_STEP_RESOLUTION_32: u8 = 3;
pub const SILENT_STEPPER_V2_BRICKLET_STEP_RESOLUTION_64: u8 = 2;
pub const SILENT_STEPPER_V2_BRICKLET_STEP_RESOLUTION_128: u8 = 1;
pub const SILENT_STEPPER_V2_BRICKLET_STEP_RESOLUTION_256: u8 = 0;
pub const SILENT_STEPPER_V2_BRICKLET_CHOPPER_MODE_SPREAD_CYCLE: u8 = 0;
pub const SILENT_STEPPER_V2_BRICKLET_CHOPPER_MODE_FAST_DECAY: u8 = 1;
pub const SILENT_STEPPER_V2_BRICKLET_FREEWHEEL_MODE_NORMAL: u8 = 0;
pub const SILENT_STEPPER_V2_BRICKLET_FREEWHEEL_MODE_FREEWHEELING: u8 = 1;
pub const SILENT_STEPPER_V2_BRICKLET_FREEWHEEL_MODE_COIL_SHORT_LS: u8 = 2;
pub const SILENT_STEPPER_V2_BRICKLET_FREEWHEEL_MODE_COIL_SHORT_HS: u8 = 3;
pub const SILENT_STEPPER_V2_BRICKLET_CURRENT_UP_STEP_INCREMENT_1: u8 = 0;
pub const SILENT_STEPPER_V2_BRICKLET_CURRENT_UP_STEP_INCREMENT_2: u8 = 1;
pub const SILENT_STEPPER_V2_BRICKLET_CURRENT_UP_STEP_INCREMENT_4: u8 = 2;
pub const SILENT_STEPPER_V2_BRICKLET_CURRENT_UP_STEP_INCREMENT_8: u8 = 3;
pub const SILENT_STEPPER_V2_BRICKLET_CURRENT_DOWN_STEP_DECREMENT_1: u8 = 0;
pub const SILENT_STEPPER_V2_BRICKLET_CURRENT_DOWN_STEP_DECREMENT_2: u8 = 1;
pub const SILENT_STEPPER_V2_BRICKLET_CURRENT_DOWN_STEP_DECREMENT_8: u8 = 2;
pub const SILENT_STEPPER_V2_BRICKLET_CURRENT_DOWN_STEP_DECREMENT_32: u8 = 3;
pub const SILENT_STEPPER_V2_BRICKLET_MINIMUM_CURRENT_HALF: u8 = 0;
pub const SILENT_STEPPER_V2_BRICKLET_MINIMUM_CURRENT_QUARTER: u8 = 1;
pub const SILENT_STEPPER_V2_BRICKLET_STALLGUARD_MODE_STANDARD: u8 = 0;
pub const SILENT_STEPPER_V2_BRICKLET_STALLGUARD_MODE_FILTERED: u8 = 1;
pub const SILENT_STEPPER_V2_BRICKLET_OPEN_LOAD_NONE: u8 = 0;
pub const SILENT_STEPPER_V2_BRICKLET_OPEN_LOAD_PHASE_A: u8 = 1;
pub const SILENT_STEPPER_V2_BRICKLET_OPEN_LOAD_PHASE_B: u8 = 2;
pub const SILENT_STEPPER_V2_BRICKLET_OPEN_LOAD_PHASE_AB: u8 = 3;
pub const SILENT_STEPPER_V2_BRICKLET_SHORT_TO_GROUND_NONE: u8 = 0;
pub const SILENT_STEPPER_V2_BRICKLET_SHORT_TO_GROUND_PHASE_A: u8 = 1;
pub const SILENT_STEPPER_V2_BRICKLET_SHORT_TO_GROUND_PHASE_B: u8 = 2;
pub const SILENT_STEPPER_V2_BRICKLET_SHORT_TO_GROUND_PHASE_AB: u8 = 3;
pub const SILENT_STEPPER_V2_BRICKLET_OVER_TEMPERATURE_NONE: u8 = 0;
pub const SILENT_STEPPER_V2_BRICKLET_OVER_TEMPERATURE_WARNING: u8 = 1;
pub const SILENT_STEPPER_V2_BRICKLET_OVER_TEMPERATURE_LIMIT: u8 = 2;
pub const SILENT_STEPPER_V2_BRICKLET_STATE_STOP: u8 = 1;
pub const SILENT_STEPPER_V2_BRICKLET_STATE_ACCELERATION: u8 = 2;
pub const SILENT_STEPPER_V2_BRICKLET_STATE_RUN: u8 = 3;
pub const SILENT_STEPPER_V2_BRICKLET_STATE_DEACCELERATION: u8 = 4;
pub const SILENT_STEPPER_V2_BRICKLET_STATE_DIRECTION_CHANGE_TO_FORWARD: u8 = 5;
pub const SILENT_STEPPER_V2_BRICKLET_STATE_DIRECTION_CHANGE_TO_BACKWARD: u8 = 6;
pub const SILENT_STEPPER_V2_BRICKLET_GPIO_ACTION_NONE: u32 = 0;
pub const SILENT_STEPPER_V2_BRICKLET_GPIO_ACTION_NORMAL_STOP_RISING_EDGE: u32 = 1;
pub const SILENT_STEPPER_V2_BRICKLET_GPIO_ACTION_NORMAL_STOP_FALLING_EDGE: u32 = 2;
pub const SILENT_STEPPER_V2_BRICKLET_GPIO_ACTION_FULL_BRAKE_RISING_EDGE: u32 = 4;
pub const SILENT_STEPPER_V2_BRICKLET_GPIO_ACTION_FULL_BRAKE_FALLING_EDGE: u32 = 8;
pub const SILENT_STEPPER_V2_BRICKLET_GPIO_ACTION_CALLBACK_RISING_EDGE: u32 = 16;
pub const SILENT_STEPPER_V2_BRICKLET_GPIO_ACTION_CALLBACK_FALLING_EDGE: u32 = 32;
pub const SILENT_STEPPER_V2_BRICKLET_ERROR_LED_CONFIG_OFF: u8 = 0;
pub const SILENT_STEPPER_V2_BRICKLET_ERROR_LED_CONFIG_ON: u8 = 1;
pub const SILENT_STEPPER_V2_BRICKLET_ERROR_LED_CONFIG_SHOW_HEARTBEAT: u8 = 2;
pub const SILENT_STEPPER_V2_BRICKLET_ERROR_LED_CONFIG_SHOW_ERROR: u8 = 3;
pub const SILENT_STEPPER_V2_BRICKLET_BOOTLOADER_MODE_BOOTLOADER: u8 = 0;
pub const SILENT_STEPPER_V2_BRICKLET_BOOTLOADER_MODE_FIRMWARE: u8 = 1;
pub const SILENT_STEPPER_V2_BRICKLET_BOOTLOADER_MODE_BOOTLOADER_WAIT_FOR_REBOOT: u8 = 2;
pub const SILENT_STEPPER_V2_BRICKLET_BOOTLOADER_MODE_FIRMWARE_WAIT_FOR_REBOOT: u8 = 3;
pub const SILENT_STEPPER_V2_BRICKLET_BOOTLOADER_MODE_FIRMWARE_WAIT_FOR_ERASE_AND_REBOOT: u8 = 4;
pub const SILENT_STEPPER_V2_BRICKLET_BOOTLOADER_STATUS_OK: u8 = 0;
pub const SILENT_STEPPER_V2_BRICKLET_BOOTLOADER_STATUS_INVALID_MODE: u8 = 1;
pub const SILENT_STEPPER_V2_BRICKLET_BOOTLOADER_STATUS_NO_CHANGE: u8 = 2;
pub const SILENT_STEPPER_V2_BRICKLET_BOOTLOADER_STATUS_ENTRY_FUNCTION_NOT_PRESENT: u8 = 3;
pub const SILENT_STEPPER_V2_BRICKLET_BOOTLOADER_STATUS_DEVICE_IDENTIFIER_INCORRECT: u8 = 4;
pub const SILENT_STEPPER_V2_BRICKLET_BOOTLOADER_STATUS_CRC_MISMATCH: u8 = 5;
pub const SILENT_STEPPER_V2_BRICKLET_STATUS_LED_CONFIG_OFF: u8 = 0;
pub const SILENT_STEPPER_V2_BRICKLET_STATUS_LED_CONFIG_ON: u8 = 1;
pub const SILENT_STEPPER_V2_BRICKLET_STATUS_LED_CONFIG_SHOW_HEARTBEAT: u8 = 2;
pub const SILENT_STEPPER_V2_BRICKLET_STATUS_LED_CONFIG_SHOW_STATUS: u8 = 3;
#[derive(Clone, Copy, Debug, Default, PartialEq, Eq, Hash)]
pub struct SpeedRamping {
pub acceleration: u16,
pub deacceleration: u16,
}
impl FromByteSlice for SpeedRamping {
fn bytes_expected() -> usize { 4 }
fn from_le_byte_slice(bytes: &[u8]) -> SpeedRamping {
SpeedRamping { acceleration: <u16>::from_le_byte_slice(&bytes[0..2]), deacceleration: <u16>::from_le_byte_slice(&bytes[2..4]) }
}
}
#[derive(Clone, Copy, Debug, Default, PartialEq, Eq, Hash)]
pub struct StepConfiguration {
pub step_resolution: u8,
pub interpolation: bool,
}
impl FromByteSlice for StepConfiguration {
fn bytes_expected() -> usize { 2 }
fn from_le_byte_slice(bytes: &[u8]) -> StepConfiguration {
StepConfiguration {
step_resolution: <u8>::from_le_byte_slice(&bytes[0..1]),
interpolation: <bool>::from_le_byte_slice(&bytes[1..2]),
}
}
}
#[derive(Clone, Copy, Debug, Default, PartialEq, Eq, Hash)]
pub struct BasicConfiguration {
pub standstill_current: u16,
pub motor_run_current: u16,
pub standstill_delay_time: u16,
pub power_down_time: u16,
pub stealth_threshold: u16,
pub coolstep_threshold: u16,
pub classic_threshold: u16,
pub high_velocity_chopper_mode: bool,
}
impl FromByteSlice for BasicConfiguration {
fn bytes_expected() -> usize { 15 }
fn from_le_byte_slice(bytes: &[u8]) -> BasicConfiguration {
BasicConfiguration {
standstill_current: <u16>::from_le_byte_slice(&bytes[0..2]),
motor_run_current: <u16>::from_le_byte_slice(&bytes[2..4]),
standstill_delay_time: <u16>::from_le_byte_slice(&bytes[4..6]),
power_down_time: <u16>::from_le_byte_slice(&bytes[6..8]),
stealth_threshold: <u16>::from_le_byte_slice(&bytes[8..10]),
coolstep_threshold: <u16>::from_le_byte_slice(&bytes[10..12]),
classic_threshold: <u16>::from_le_byte_slice(&bytes[12..14]),
high_velocity_chopper_mode: <bool>::from_le_byte_slice(&bytes[14..15]),
}
}
}
#[derive(Clone, Copy, Debug, Default, PartialEq, Eq, Hash)]
pub struct SpreadcycleConfiguration {
pub slow_decay_duration: u8,
pub enable_random_slow_decay: bool,
pub fast_decay_duration: u8,
pub hysteresis_start_value: u8,
pub hysteresis_end_value: i8,
pub sine_wave_offset: i8,
pub chopper_mode: u8,
pub comparator_blank_time: u8,
pub fast_decay_without_comparator: bool,
}
impl FromByteSlice for SpreadcycleConfiguration {
fn bytes_expected() -> usize { 9 }
fn from_le_byte_slice(bytes: &[u8]) -> SpreadcycleConfiguration {
SpreadcycleConfiguration {
slow_decay_duration: <u8>::from_le_byte_slice(&bytes[0..1]),
enable_random_slow_decay: <bool>::from_le_byte_slice(&bytes[1..2]),
fast_decay_duration: <u8>::from_le_byte_slice(&bytes[2..3]),
hysteresis_start_value: <u8>::from_le_byte_slice(&bytes[3..4]),
hysteresis_end_value: <i8>::from_le_byte_slice(&bytes[4..5]),
sine_wave_offset: <i8>::from_le_byte_slice(&bytes[5..6]),
chopper_mode: <u8>::from_le_byte_slice(&bytes[6..7]),
comparator_blank_time: <u8>::from_le_byte_slice(&bytes[7..8]),
fast_decay_without_comparator: <bool>::from_le_byte_slice(&bytes[8..9]),
}
}
}
#[derive(Clone, Copy, Debug, Default, PartialEq, Eq, Hash)]
pub struct StealthConfiguration {
pub enable_stealth: bool,
pub amplitude: u8,
pub gradient: u8,
pub enable_autoscale: bool,
pub force_symmetric: bool,
pub freewheel_mode: u8,
}
impl FromByteSlice for StealthConfiguration {
fn bytes_expected() -> usize { 6 }
fn from_le_byte_slice(bytes: &[u8]) -> StealthConfiguration {
StealthConfiguration {
enable_stealth: <bool>::from_le_byte_slice(&bytes[0..1]),
amplitude: <u8>::from_le_byte_slice(&bytes[1..2]),
gradient: <u8>::from_le_byte_slice(&bytes[2..3]),
enable_autoscale: <bool>::from_le_byte_slice(&bytes[3..4]),
force_symmetric: <bool>::from_le_byte_slice(&bytes[4..5]),
freewheel_mode: <u8>::from_le_byte_slice(&bytes[5..6]),
}
}
}
#[derive(Clone, Copy, Debug, Default, PartialEq, Eq, Hash)]
pub struct CoolstepConfiguration {
pub minimum_stallguard_value: u8,
pub maximum_stallguard_value: u8,
pub current_up_step_width: u8,
pub current_down_step_width: u8,
pub minimum_current: u8,
pub stallguard_threshold_value: i8,
pub stallguard_mode: u8,
}
impl FromByteSlice for CoolstepConfiguration {
fn bytes_expected() -> usize { 7 }
fn from_le_byte_slice(bytes: &[u8]) -> CoolstepConfiguration {
CoolstepConfiguration {
minimum_stallguard_value: <u8>::from_le_byte_slice(&bytes[0..1]),
maximum_stallguard_value: <u8>::from_le_byte_slice(&bytes[1..2]),
current_up_step_width: <u8>::from_le_byte_slice(&bytes[2..3]),
current_down_step_width: <u8>::from_le_byte_slice(&bytes[3..4]),
minimum_current: <u8>::from_le_byte_slice(&bytes[4..5]),
stallguard_threshold_value: <i8>::from_le_byte_slice(&bytes[5..6]),
stallguard_mode: <u8>::from_le_byte_slice(&bytes[6..7]),
}
}
}
#[derive(Clone, Copy, Debug, Default, PartialEq, Eq, Hash)]
pub struct MiscConfiguration {
pub disable_short_to_ground_protection: bool,
pub synchronize_phase_frequency: u8,
}
impl FromByteSlice for MiscConfiguration {
fn bytes_expected() -> usize { 2 }
fn from_le_byte_slice(bytes: &[u8]) -> MiscConfiguration {
MiscConfiguration {
disable_short_to_ground_protection: <bool>::from_le_byte_slice(&bytes[0..1]),
synchronize_phase_frequency: <u8>::from_le_byte_slice(&bytes[1..2]),
}
}
}
#[derive(Clone, Copy, Debug, Default, PartialEq, Eq, Hash)]
pub struct DriverStatus {
pub open_load: u8,
pub short_to_ground: u8,
pub over_temperature: u8,
pub motor_stalled: bool,
pub actual_motor_current: u8,
pub full_step_active: bool,
pub stallguard_result: u8,
pub stealth_voltage_amplitude: u8,
}
impl FromByteSlice for DriverStatus {
fn bytes_expected() -> usize { 8 }
fn from_le_byte_slice(bytes: &[u8]) -> DriverStatus {
DriverStatus {
open_load: <u8>::from_le_byte_slice(&bytes[0..1]),
short_to_ground: <u8>::from_le_byte_slice(&bytes[1..2]),
over_temperature: <u8>::from_le_byte_slice(&bytes[2..3]),
motor_stalled: <bool>::from_le_byte_slice(&bytes[3..4]),
actual_motor_current: <u8>::from_le_byte_slice(&bytes[4..5]),
full_step_active: <bool>::from_le_byte_slice(&bytes[5..6]),
stallguard_result: <u8>::from_le_byte_slice(&bytes[6..7]),
stealth_voltage_amplitude: <u8>::from_le_byte_slice(&bytes[7..8]),
}
}
}
#[derive(Clone, Copy, Debug, Default, PartialEq, Eq, Hash)]
pub struct AllData {
pub current_velocity: u16,
pub current_position: i32,
pub remaining_steps: i32,
pub input_voltage: u16,
pub current_consumption: u16,
}
impl FromByteSlice for AllData {
fn bytes_expected() -> usize { 14 }
fn from_le_byte_slice(bytes: &[u8]) -> AllData {
AllData {
current_velocity: <u16>::from_le_byte_slice(&bytes[0..2]),
current_position: <i32>::from_le_byte_slice(&bytes[2..6]),
remaining_steps: <i32>::from_le_byte_slice(&bytes[6..10]),
input_voltage: <u16>::from_le_byte_slice(&bytes[10..12]),
current_consumption: <u16>::from_le_byte_slice(&bytes[12..14]),
}
}
}
#[derive(Clone, Copy, Debug, Default, PartialEq, Eq, Hash)]
pub struct GpioConfiguration {
pub debounce: u16,
pub stop_deceleration: u16,
}
impl FromByteSlice for GpioConfiguration {
fn bytes_expected() -> usize { 4 }
fn from_le_byte_slice(bytes: &[u8]) -> GpioConfiguration {
GpioConfiguration { debounce: <u16>::from_le_byte_slice(&bytes[0..2]), stop_deceleration: <u16>::from_le_byte_slice(&bytes[2..4]) }
}
}
#[derive(Clone, Copy, Debug, Default, PartialEq, Eq, Hash)]
pub struct AllDataEvent {
pub current_velocity: u16,
pub current_position: i32,
pub remaining_steps: i32,
pub input_voltage: u16,
pub current_consumption: u16,
}
impl FromByteSlice for AllDataEvent {
fn bytes_expected() -> usize { 14 }
fn from_le_byte_slice(bytes: &[u8]) -> AllDataEvent {
AllDataEvent {
current_velocity: <u16>::from_le_byte_slice(&bytes[0..2]),
current_position: <i32>::from_le_byte_slice(&bytes[2..6]),
remaining_steps: <i32>::from_le_byte_slice(&bytes[6..10]),
input_voltage: <u16>::from_le_byte_slice(&bytes[10..12]),
current_consumption: <u16>::from_le_byte_slice(&bytes[12..14]),
}
}
}
#[derive(Clone, Copy, Debug, Default, PartialEq, Eq, Hash)]
pub struct NewStateEvent {
pub state_new: u8,
pub state_previous: u8,
}
impl FromByteSlice for NewStateEvent {
fn bytes_expected() -> usize { 2 }
fn from_le_byte_slice(bytes: &[u8]) -> NewStateEvent {
NewStateEvent { state_new: <u8>::from_le_byte_slice(&bytes[0..1]), state_previous: <u8>::from_le_byte_slice(&bytes[1..2]) }
}
}
#[derive(Clone, Copy, Debug, Default, PartialEq, Eq, Hash)]
pub struct SpitfpErrorCount {
pub error_count_ack_checksum: u32,
pub error_count_message_checksum: u32,
pub error_count_frame: u32,
pub error_count_overflow: u32,
}
impl FromByteSlice for SpitfpErrorCount {
fn bytes_expected() -> usize { 16 }
fn from_le_byte_slice(bytes: &[u8]) -> SpitfpErrorCount {
SpitfpErrorCount {
error_count_ack_checksum: <u32>::from_le_byte_slice(&bytes[0..4]),
error_count_message_checksum: <u32>::from_le_byte_slice(&bytes[4..8]),
error_count_frame: <u32>::from_le_byte_slice(&bytes[8..12]),
error_count_overflow: <u32>::from_le_byte_slice(&bytes[12..16]),
}
}
}
#[derive(Clone, Debug, Default, PartialEq, Eq, Hash)]
pub struct Identity {
pub uid: String,
pub connected_uid: String,
pub position: char,
pub hardware_version: [u8; 3],
pub firmware_version: [u8; 3],
pub device_identifier: u16,
}
impl FromByteSlice for Identity {
fn bytes_expected() -> usize { 25 }
fn from_le_byte_slice(bytes: &[u8]) -> Identity {
Identity {
uid: <String>::from_le_byte_slice(&bytes[0..8]),
connected_uid: <String>::from_le_byte_slice(&bytes[8..16]),
position: <char>::from_le_byte_slice(&bytes[16..17]),
hardware_version: <[u8; 3]>::from_le_byte_slice(&bytes[17..20]),
firmware_version: <[u8; 3]>::from_le_byte_slice(&bytes[20..23]),
device_identifier: <u16>::from_le_byte_slice(&bytes[23..25]),
}
}
}
/// Silently drives one bipolar stepper motor with up to 46V and 1.6A per phase
#[derive(Clone)]
pub struct SilentStepperV2Bricklet {
device: Device,
}
impl SilentStepperV2Bricklet {
pub const DEVICE_IDENTIFIER: u16 = 2166;
pub const DEVICE_DISPLAY_NAME: &'static str = "Silent Stepper Bricklet 2.0";
/// Creates an object with the unique device ID `uid`. This object can then be used after the IP Connection `ip_connection` is connected.
pub fn new<T: GetRequestSender>(uid: &str, req_sender: T) -> SilentStepperV2Bricklet {
let mut result = SilentStepperV2Bricklet { device: Device::new([2, 0, 0], uid, req_sender, 0) };
result.device.response_expected[u8::from(SilentStepperV2BrickletFunction::SetMaxVelocity) as usize] = ResponseExpectedFlag::False;
result.device.response_expected[u8::from(SilentStepperV2BrickletFunction::GetMaxVelocity) as usize] =
ResponseExpectedFlag::AlwaysTrue;
result.device.response_expected[u8::from(SilentStepperV2BrickletFunction::GetCurrentVelocity) as usize] =
ResponseExpectedFlag::AlwaysTrue;
result.device.response_expected[u8::from(SilentStepperV2BrickletFunction::SetSpeedRamping) as usize] = ResponseExpectedFlag::False;
result.device.response_expected[u8::from(SilentStepperV2BrickletFunction::GetSpeedRamping) as usize] =
ResponseExpectedFlag::AlwaysTrue;
result.device.response_expected[u8::from(SilentStepperV2BrickletFunction::FullBrake) as usize] = ResponseExpectedFlag::False;
result.device.response_expected[u8::from(SilentStepperV2BrickletFunction::SetCurrentPosition) as usize] =
ResponseExpectedFlag::False;
result.device.response_expected[u8::from(SilentStepperV2BrickletFunction::GetCurrentPosition) as usize] =
ResponseExpectedFlag::AlwaysTrue;
result.device.response_expected[u8::from(SilentStepperV2BrickletFunction::SetTargetPosition) as usize] =
ResponseExpectedFlag::False;
result.device.response_expected[u8::from(SilentStepperV2BrickletFunction::GetTargetPosition) as usize] =
ResponseExpectedFlag::AlwaysTrue;
result.device.response_expected[u8::from(SilentStepperV2BrickletFunction::SetSteps) as usize] = ResponseExpectedFlag::False;
result.device.response_expected[u8::from(SilentStepperV2BrickletFunction::GetSteps) as usize] = ResponseExpectedFlag::AlwaysTrue;
result.device.response_expected[u8::from(SilentStepperV2BrickletFunction::GetRemainingSteps) as usize] =
ResponseExpectedFlag::AlwaysTrue;
result.device.response_expected[u8::from(SilentStepperV2BrickletFunction::SetStepConfiguration) as usize] =
ResponseExpectedFlag::False;
result.device.response_expected[u8::from(SilentStepperV2BrickletFunction::GetStepConfiguration) as usize] =
ResponseExpectedFlag::AlwaysTrue;
result.device.response_expected[u8::from(SilentStepperV2BrickletFunction::DriveForward) as usize] = ResponseExpectedFlag::False;
result.device.response_expected[u8::from(SilentStepperV2BrickletFunction::DriveBackward) as usize] = ResponseExpectedFlag::False;
result.device.response_expected[u8::from(SilentStepperV2BrickletFunction::Stop) as usize] = ResponseExpectedFlag::False;
result.device.response_expected[u8::from(SilentStepperV2BrickletFunction::GetInputVoltage) as usize] =
ResponseExpectedFlag::AlwaysTrue;
result.device.response_expected[u8::from(SilentStepperV2BrickletFunction::SetMotorCurrent) as usize] = ResponseExpectedFlag::False;
result.device.response_expected[u8::from(SilentStepperV2BrickletFunction::GetMotorCurrent) as usize] =
ResponseExpectedFlag::AlwaysTrue;
result.device.response_expected[u8::from(SilentStepperV2BrickletFunction::SetEnabled) as usize] = ResponseExpectedFlag::False;
result.device.response_expected[u8::from(SilentStepperV2BrickletFunction::GetEnabled) as usize] = ResponseExpectedFlag::AlwaysTrue;
result.device.response_expected[u8::from(SilentStepperV2BrickletFunction::SetBasicConfiguration) as usize] =
ResponseExpectedFlag::False;
result.device.response_expected[u8::from(SilentStepperV2BrickletFunction::GetBasicConfiguration) as usize] =
ResponseExpectedFlag::AlwaysTrue;
result.device.response_expected[u8::from(SilentStepperV2BrickletFunction::SetSpreadcycleConfiguration) as usize] =
ResponseExpectedFlag::False;
result.device.response_expected[u8::from(SilentStepperV2BrickletFunction::GetSpreadcycleConfiguration) as usize] =
ResponseExpectedFlag::AlwaysTrue;
result.device.response_expected[u8::from(SilentStepperV2BrickletFunction::SetStealthConfiguration) as usize] =
ResponseExpectedFlag::False;
result.device.response_expected[u8::from(SilentStepperV2BrickletFunction::GetStealthConfiguration) as usize] =
ResponseExpectedFlag::AlwaysTrue;
result.device.response_expected[u8::from(SilentStepperV2BrickletFunction::SetCoolstepConfiguration) as usize] =
ResponseExpectedFlag::False;
result.device.response_expected[u8::from(SilentStepperV2BrickletFunction::GetCoolstepConfiguration) as usize] =
ResponseExpectedFlag::AlwaysTrue;
result.device.response_expected[u8::from(SilentStepperV2BrickletFunction::SetMiscConfiguration) as usize] =
ResponseExpectedFlag::False;
result.device.response_expected[u8::from(SilentStepperV2BrickletFunction::GetMiscConfiguration) as usize] =
ResponseExpectedFlag::AlwaysTrue;
result.device.response_expected[u8::from(SilentStepperV2BrickletFunction::SetErrorLedConfig) as usize] =
ResponseExpectedFlag::False;
result.device.response_expected[u8::from(SilentStepperV2BrickletFunction::GetErrorLedConfig) as usize] =
ResponseExpectedFlag::AlwaysTrue;
result.device.response_expected[u8::from(SilentStepperV2BrickletFunction::GetDriverStatus) as usize] =
ResponseExpectedFlag::AlwaysTrue;
result.device.response_expected[u8::from(SilentStepperV2BrickletFunction::SetMinimumVoltage) as usize] = ResponseExpectedFlag::True;
result.device.response_expected[u8::from(SilentStepperV2BrickletFunction::GetMinimumVoltage) as usize] =
ResponseExpectedFlag::AlwaysTrue;
result.device.response_expected[u8::from(SilentStepperV2BrickletFunction::SetTimeBase) as usize] = ResponseExpectedFlag::False;
result.device.response_expected[u8::from(SilentStepperV2BrickletFunction::GetTimeBase) as usize] = ResponseExpectedFlag::AlwaysTrue;
result.device.response_expected[u8::from(SilentStepperV2BrickletFunction::GetAllData) as usize] = ResponseExpectedFlag::AlwaysTrue;
result.device.response_expected[u8::from(SilentStepperV2BrickletFunction::SetAllCallbackConfiguration) as usize] =
ResponseExpectedFlag::True;
result.device.response_expected[u8::from(SilentStepperV2BrickletFunction::GetAllDataCallbackConfiguraton) as usize] =
ResponseExpectedFlag::AlwaysTrue;
result.device.response_expected[u8::from(SilentStepperV2BrickletFunction::SetGpioConfiguration) as usize] =
ResponseExpectedFlag::False;
result.device.response_expected[u8::from(SilentStepperV2BrickletFunction::GetGpioConfiguration) as usize] =
ResponseExpectedFlag::AlwaysTrue;
result.device.response_expected[u8::from(SilentStepperV2BrickletFunction::SetGpioAction) as usize] = ResponseExpectedFlag::False;
result.device.response_expected[u8::from(SilentStepperV2BrickletFunction::GetGpioAction) as usize] =
ResponseExpectedFlag::AlwaysTrue;
result.device.response_expected[u8::from(SilentStepperV2BrickletFunction::GetGpioState) as usize] =
ResponseExpectedFlag::AlwaysTrue;
result.device.response_expected[u8::from(SilentStepperV2BrickletFunction::GetSpitfpErrorCount) as usize] =
ResponseExpectedFlag::AlwaysTrue;
result.device.response_expected[u8::from(SilentStepperV2BrickletFunction::SetBootloaderMode) as usize] =
ResponseExpectedFlag::AlwaysTrue;
result.device.response_expected[u8::from(SilentStepperV2BrickletFunction::GetBootloaderMode) as usize] =
ResponseExpectedFlag::AlwaysTrue;
result.device.response_expected[u8::from(SilentStepperV2BrickletFunction::SetWriteFirmwarePointer) as usize] =
ResponseExpectedFlag::False;
result.device.response_expected[u8::from(SilentStepperV2BrickletFunction::WriteFirmware) as usize] =
ResponseExpectedFlag::AlwaysTrue;
result.device.response_expected[u8::from(SilentStepperV2BrickletFunction::SetStatusLedConfig) as usize] =
ResponseExpectedFlag::False;
result.device.response_expected[u8::from(SilentStepperV2BrickletFunction::GetStatusLedConfig) as usize] =
ResponseExpectedFlag::AlwaysTrue;
result.device.response_expected[u8::from(SilentStepperV2BrickletFunction::GetChipTemperature) as usize] =
ResponseExpectedFlag::AlwaysTrue;
result.device.response_expected[u8::from(SilentStepperV2BrickletFunction::Reset) as usize] = ResponseExpectedFlag::False;
result.device.response_expected[u8::from(SilentStepperV2BrickletFunction::WriteUid) as usize] = ResponseExpectedFlag::False;
result.device.response_expected[u8::from(SilentStepperV2BrickletFunction::ReadUid) as usize] = ResponseExpectedFlag::AlwaysTrue;
result.device.response_expected[u8::from(SilentStepperV2BrickletFunction::GetIdentity) as usize] = ResponseExpectedFlag::AlwaysTrue;
result
}
/// Returns the response expected flag for the function specified by the function ID parameter.
/// It is true if the function is expected to send a response, false otherwise.
///
/// For getter functions this is enabled by default and cannot be disabled, because those
/// functions will always send a response. For callback configuration functions it is enabled
/// by default too, but can be disabled by [`set_response_expected`](crate::silent_stepper_v2_bricklet::SilentStepperV2Bricklet::set_response_expected).
/// For setter functions it is disabled by default and can be enabled.
///
/// Enabling the response expected flag for a setter function allows to detect timeouts
/// and other error conditions calls of this setter as well. The device will then send a response
/// for this purpose. If this flag is disabled for a setter function then no response is sent
/// and errors are silently ignored, because they cannot be detected.
///
/// See [`set_response_expected`](crate::silent_stepper_v2_bricklet::SilentStepperV2Bricklet::set_response_expected) for the list of function ID constants available for this function.
pub fn get_response_expected(&mut self, fun: SilentStepperV2BrickletFunction) -> Result<bool, GetResponseExpectedError> {
self.device.get_response_expected(u8::from(fun))
}
/// Changes the response expected flag of the function specified by the function ID parameter.
/// This flag can only be changed for setter (default value: false) and callback configuration
/// functions (default value: true). For getter functions it is always enabled.
///
/// Enabling the response expected flag for a setter function allows to detect timeouts and
/// other error conditions calls of this setter as well. The device will then send a response
/// for this purpose. If this flag is disabled for a setter function then no response is sent
/// and errors are silently ignored, because they cannot be detected.
pub fn set_response_expected(
&mut self,
fun: SilentStepperV2BrickletFunction,
response_expected: bool,
) -> Result<(), SetResponseExpectedError> {
self.device.set_response_expected(u8::from(fun), response_expected)
}
/// Changes the response expected flag for all setter and callback configuration functions of this device at once.
pub fn set_response_expected_all(&mut self, response_expected: bool) { self.device.set_response_expected_all(response_expected) }
/// Returns the version of the API definition (major, minor, revision) implemented by this API bindings.
/// This is neither the release version of this API bindings nor does it tell you anything about the represented Brick or Bricklet.
pub fn get_api_version(&self) -> [u8; 3] { self.device.api_version }
/// This receiver is triggered when the input voltage drops below the value set by
/// [`set_minimum_voltage`]. The parameter is the current voltage.
///
/// [`set_minimum_voltage`]: #method.set_minimum_voltage
pub fn get_under_voltage_callback_receiver(&self) -> ConvertingCallbackReceiver<u16> {
self.device.get_callback_receiver(u8::from(SilentStepperV2BrickletFunction::CallbackUnderVoltage))
}
/// This receiver is triggered when a position set by [`set_steps`] or
/// [`set_target_position`] is reached.
///
/// # Note
/// Since we can't get any feedback from the stepper motor, this only works if the
/// acceleration (see [`set_speed_ramping`]) is set smaller or equal to the
/// maximum acceleration of the motor. Otherwise the motor will lag behind the
/// control value and the receiver will be triggered too early.
pub fn get_position_reached_callback_receiver(&self) -> ConvertingCallbackReceiver<i32> {
self.device.get_callback_receiver(u8::from(SilentStepperV2BrickletFunction::CallbackPositionReached))
}
/// This receiver is triggered periodically with the period that is set by
/// [`set_all_callback_configuration`]. The parameters are: the current velocity,
/// the current position, the remaining steps, the stack voltage, the external
/// voltage and the current consumption of the stepper motor.
pub fn get_all_data_callback_receiver(&self) -> ConvertingCallbackReceiver<AllDataEvent> {
self.device.get_callback_receiver(u8::from(SilentStepperV2BrickletFunction::CallbackAllData))
}
/// This receiver is triggered whenever the Silent Stepper Bricklet 2.0 enters a new state.
/// It returns the new state as well as the previous state.
pub fn get_new_state_callback_receiver(&self) -> ConvertingCallbackReceiver<NewStateEvent> {
self.device.get_callback_receiver(u8::from(SilentStepperV2BrickletFunction::CallbackNewState))
}
/// This receiver is triggered by GPIO changes if it is activated through [`set_gpio_action`].
pub fn get_gpio_state_callback_receiver(&self) -> ConvertingCallbackReceiver<[bool; 2]> {
self.device.get_callback_receiver(u8::from(SilentStepperV2BrickletFunction::CallbackGpioState))
}
/// Sets the maximum velocity of the stepper motor.
/// This function does *not* start the motor, it merely sets the maximum
/// velocity the stepper motor is accelerated to. To get the motor running use
/// either [`set_target_position`], [`set_steps`], [`drive_forward`] or
/// [`drive_backward`].
pub fn set_max_velocity(&self, velocity: u16) -> ConvertingReceiver<()> {
let mut payload = vec![0; 2];
payload[0..2].copy_from_slice(&<u16>::to_le_byte_vec(velocity));
self.device.set(u8::from(SilentStepperV2BrickletFunction::SetMaxVelocity), payload)
}
/// Returns the velocity as set by [`set_max_velocity`].
pub fn get_max_velocity(&self) -> ConvertingReceiver<u16> {
let payload = vec![0; 0];
self.device.get(u8::from(SilentStepperV2BrickletFunction::GetMaxVelocity), payload)
}
/// Returns the *current* velocity of the stepper motor.
pub fn get_current_velocity(&self) -> ConvertingReceiver<u16> {
let payload = vec![0; 0];
self.device.get(u8::from(SilentStepperV2BrickletFunction::GetCurrentVelocity), payload)
}
/// Sets the acceleration and deacceleration of the stepper motor.
/// An acceleration of 1000 means, that
/// every second the velocity is increased by 1000 *steps/s*.
///
/// For example: If the current velocity is 0 and you want to accelerate to a
/// velocity of 8000 *steps/s* in 10 seconds, you should set an acceleration
/// of 800 *steps/s²*.
///
/// An acceleration/deacceleration of 0 means instantaneous
/// acceleration/deacceleration (not recommended)
pub fn set_speed_ramping(&self, acceleration: u16, deacceleration: u16) -> ConvertingReceiver<()> {
let mut payload = vec![0; 4];
payload[0..2].copy_from_slice(&<u16>::to_le_byte_vec(acceleration));
payload[2..4].copy_from_slice(&<u16>::to_le_byte_vec(deacceleration));
self.device.set(u8::from(SilentStepperV2BrickletFunction::SetSpeedRamping), payload)
}
/// Returns the acceleration and deacceleration as set by
/// [`set_speed_ramping`].
pub fn get_speed_ramping(&self) -> ConvertingReceiver<SpeedRamping> {
let payload = vec![0; 0];
self.device.get(u8::from(SilentStepperV2BrickletFunction::GetSpeedRamping), payload)
}
/// Executes an active full brake.
///
/// # Warning
/// This function is for emergency purposes,
/// where an immediate brake is necessary. Depending on the current velocity and
/// the strength of the motor, a full brake can be quite violent.
///
/// Call [`stop`] if you just want to stop the motor.
pub fn full_brake(&self) -> ConvertingReceiver<()> {
let payload = vec![0; 0];
self.device.set(u8::from(SilentStepperV2BrickletFunction::FullBrake), payload)
}
/// Sets the current steps of the internal step counter. This can be used to
/// set the current position to 0 when some kind of starting position
/// is reached (e.g. when a CNC machine reaches a corner).
pub fn set_current_position(&self, position: i32) -> ConvertingReceiver<()> {
let mut payload = vec![0; 4];
payload[0..4].copy_from_slice(&<i32>::to_le_byte_vec(position));
self.device.set(u8::from(SilentStepperV2BrickletFunction::SetCurrentPosition), payload)
}
/// Returns the current position of the stepper motor in steps. On startup
/// the position is 0. The steps are counted with all possible driving
/// functions ([`set_target_position`], [`set_steps`], [`drive_forward`] or
/// [`drive_backward`]). It also is possible to reset the steps to 0 or
/// set them to any other desired value with [`set_current_position`].
pub fn get_current_position(&self) -> ConvertingReceiver<i32> {
let payload = vec![0; 0];
self.device.get(u8::from(SilentStepperV2BrickletFunction::GetCurrentPosition), payload)
}
/// Sets the target position of the stepper motor in steps. For example,
/// if the current position of the motor is 500 and [`set_target_position`] is
/// called with 1000, the stepper motor will drive 500 steps forward. It will
/// use the velocity, acceleration and deacceleration as set by
/// [`set_max_velocity`] and [`set_speed_ramping`].
///
/// A call of [`set_target_position`] with the parameter *x* is equivalent to
/// a call of [`set_steps`] with the parameter
/// (*x* - [`get_current_position`]).
pub fn set_target_position(&self, position: i32) -> ConvertingReceiver<()> {
let mut payload = vec![0; 4];
payload[0..4].copy_from_slice(&<i32>::to_le_byte_vec(position));
self.device.set(u8::from(SilentStepperV2BrickletFunction::SetTargetPosition), payload)
}
/// Returns the last target position as set by [`set_target_position`].
pub fn get_target_position(&self) -> ConvertingReceiver<i32> {
let payload = vec![0; 0];
self.device.get(u8::from(SilentStepperV2BrickletFunction::GetTargetPosition), payload)
}
/// Sets the number of steps the stepper motor should run. Positive values
/// will drive the motor forward and negative values backward.
/// The velocity, acceleration and deacceleration as set by
/// [`set_max_velocity`] and [`set_speed_ramping`] will be used.
pub fn set_steps(&self, steps: i32) -> ConvertingReceiver<()> {
let mut payload = vec![0; 4];
payload[0..4].copy_from_slice(&<i32>::to_le_byte_vec(steps));
self.device.set(u8::from(SilentStepperV2BrickletFunction::SetSteps), payload)
}
/// Returns the last steps as set by [`set_steps`].
pub fn get_steps(&self) -> ConvertingReceiver<i32> {
let payload = vec![0; 0];
self.device.get(u8::from(SilentStepperV2BrickletFunction::GetSteps), payload)
}
/// Returns the remaining steps of the last call of [`set_steps`].
/// For example, if [`set_steps`] is called with 2000 and
/// [`get_remaining_steps`] is called after the motor has run for 500 steps,
/// it will return 1500.
pub fn get_remaining_steps(&self) -> ConvertingReceiver<i32> {
let payload = vec![0; 0];
self.device.get(u8::from(SilentStepperV2BrickletFunction::GetRemainingSteps), payload)
}
/// Sets the step resolution from full-step up to 1/256-step.
///
/// If interpolation is turned on, the Silent Stepper Bricklet 2.0 will always interpolate
/// your step inputs as 1/256-step. If you use full-step mode with interpolation, each
/// step will generate 256 1/256 steps.
///
/// For maximum torque use full-step without interpolation. For maximum resolution use
/// 1/256-step. Turn interpolation on to make the Stepper driving less noisy.
///
/// If you often change the speed with high acceleration you should turn the
/// interpolation off.
///
/// Associated constants:
/// * SILENT_STEPPER_V2_BRICKLET_STEP_RESOLUTION_1
/// * SILENT_STEPPER_V2_BRICKLET_STEP_RESOLUTION_2
/// * SILENT_STEPPER_V2_BRICKLET_STEP_RESOLUTION_4
/// * SILENT_STEPPER_V2_BRICKLET_STEP_RESOLUTION_8
/// * SILENT_STEPPER_V2_BRICKLET_STEP_RESOLUTION_16
/// * SILENT_STEPPER_V2_BRICKLET_STEP_RESOLUTION_32
/// * SILENT_STEPPER_V2_BRICKLET_STEP_RESOLUTION_64
/// * SILENT_STEPPER_V2_BRICKLET_STEP_RESOLUTION_128
/// * SILENT_STEPPER_V2_BRICKLET_STEP_RESOLUTION_256
pub fn set_step_configuration(&self, step_resolution: u8, interpolation: bool) -> ConvertingReceiver<()> {
let mut payload = vec![0; 2];
payload[0..1].copy_from_slice(&<u8>::to_le_byte_vec(step_resolution));
payload[1..2].copy_from_slice(&<bool>::to_le_byte_vec(interpolation));
self.device.set(u8::from(SilentStepperV2BrickletFunction::SetStepConfiguration), payload)
}
/// Returns the step mode as set by [`set_step_configuration`].
///
/// Associated constants:
/// * SILENT_STEPPER_V2_BRICKLET_STEP_RESOLUTION_1
/// * SILENT_STEPPER_V2_BRICKLET_STEP_RESOLUTION_2
/// * SILENT_STEPPER_V2_BRICKLET_STEP_RESOLUTION_4
/// * SILENT_STEPPER_V2_BRICKLET_STEP_RESOLUTION_8
/// * SILENT_STEPPER_V2_BRICKLET_STEP_RESOLUTION_16
/// * SILENT_STEPPER_V2_BRICKLET_STEP_RESOLUTION_32
/// * SILENT_STEPPER_V2_BRICKLET_STEP_RESOLUTION_64
/// * SILENT_STEPPER_V2_BRICKLET_STEP_RESOLUTION_128
/// * SILENT_STEPPER_V2_BRICKLET_STEP_RESOLUTION_256
pub fn get_step_configuration(&self) -> ConvertingReceiver<StepConfiguration> {
let payload = vec![0; 0];
self.device.get(u8::from(SilentStepperV2BrickletFunction::GetStepConfiguration), payload)
}
/// Drives the stepper motor forward until [`drive_backward`] or
/// [`stop`] is called. The velocity, acceleration and deacceleration as
/// set by [`set_max_velocity`] and [`set_speed_ramping`] will be used.
pub fn drive_forward(&self) -> ConvertingReceiver<()> {
let payload = vec![0; 0];
self.device.set(u8::from(SilentStepperV2BrickletFunction::DriveForward), payload)
}
/// Drives the stepper motor backward until [`drive_forward`] or
/// [`stop`] is triggered. The velocity, acceleration and deacceleration as
/// set by [`set_max_velocity`] and [`set_speed_ramping`] will be used.
pub fn drive_backward(&self) -> ConvertingReceiver<()> {
let payload = vec![0; 0];
self.device.set(u8::from(SilentStepperV2BrickletFunction::DriveBackward), payload)
}
/// Stops the stepper motor with the deacceleration as set by
/// [`set_speed_ramping`].
pub fn stop(&self) -> ConvertingReceiver<()> {
let payload = vec![0; 0];
self.device.set(u8::from(SilentStepperV2BrickletFunction::Stop), payload)
}
/// Returns the external input voltage. The external input voltage is
/// given via the black power input connector on the Silent Stepper Bricklet 2.0.
///
/// If there is an external input voltage and a stack input voltage, the motor
/// will be driven by the external input voltage. If there is only a stack
/// voltage present, the motor will be driven by this voltage.
///
/// # Warning
/// This means, if you have a high stack voltage and a low external voltage,
/// the motor will be driven with the low external voltage. If you then remove
/// the external connection, it will immediately be driven by the high
/// stack voltage
pub fn get_input_voltage(&self) -> ConvertingReceiver<u16> {
let payload = vec![0; 0];
self.device.get(u8::from(SilentStepperV2BrickletFunction::GetInputVoltage), payload)
}
/// Sets the current with which the motor will be driven.
///
/// # Warning
/// Do not set this value above the specifications of your stepper motor.
/// Otherwise it may damage your motor.
pub fn set_motor_current(&self, current: u16) -> ConvertingReceiver<()> {
let mut payload = vec![0; 2];
payload[0..2].copy_from_slice(&<u16>::to_le_byte_vec(current));
self.device.set(u8::from(SilentStepperV2BrickletFunction::SetMotorCurrent), payload)
}
/// Returns the current as set by [`set_motor_current`].
pub fn get_motor_current(&self) -> ConvertingReceiver<u16> {
let payload = vec![0; 0];
self.device.get(u8::from(SilentStepperV2BrickletFunction::GetMotorCurrent), payload)
}
/// Enables/Disables the driver chip. The driver parameters can be configured (maximum velocity,
/// acceleration, etc) before it is enabled.
///
/// # Warning
/// Disabling the driver chip while the motor is still turning can damage the
/// driver chip. The motor should be stopped calling [`stop`] function
/// before disabling the motor power. The [`stop`] function will **not**
/// wait until the motor is actually stopped. You have to explicitly wait for the
/// appropriate time after calling the [`stop`] function before calling
/// the [`set_enabled`] with false function.
pub fn set_enabled(&self, enabled: bool) -> ConvertingReceiver<()> {
let mut payload = vec![0; 1];
payload[0..1].copy_from_slice(&<bool>::to_le_byte_vec(enabled));
self.device.set(u8::from(SilentStepperV2BrickletFunction::SetEnabled), payload)
}
/// Returns *true* if the stepper driver is enabled, *false* otherwise.
pub fn get_enabled(&self) -> ConvertingReceiver<bool> {
let payload = vec![0; 0];
self.device.get(u8::from(SilentStepperV2BrickletFunction::GetEnabled), payload)
}
/// Sets the basic configuration parameters for the different modes (Stealth, Coolstep, Classic).
///
/// * Standstill Current: This value can be used to lower the current during stand still. This might
/// be reasonable to reduce the heating of the motor and the Bricklet 2.0. When the motor is in standstill
/// the configured motor phase current will be driven until the configured
/// Power Down Time is elapsed. After that the phase current will be reduced to the standstill
/// current. The elapsed time for this reduction can be configured with the Standstill Delay Time.
/// The maximum allowed value is the configured maximum motor current
/// (see [`set_motor_current`]).
///
/// * Motor Run Current: The value sets the motor current when the motor is running.
/// Use a value of at least one half of the global maximum motor current for a good
/// microstep performance. The maximum allowed value is the current
/// motor current. The API maps the entered value to 1/32 ... 32/32 of the maximum
/// motor current. This value should be used to change the motor current during motor movement,
/// whereas the global maximum motor current should not be changed while the motor is moving
/// (see [`set_motor_current`]).
///
/// * Standstill Delay Time: Controls the duration for motor power down after a motion
/// as soon as standstill is detected and the Power Down Time is expired. A high Standstill Delay
/// Time results in a smooth transition that avoids motor jerk during power down.
///
/// * Power Down Time: Sets the delay time after a stand still.
///
/// * Stealth Threshold: Sets the upper threshold for Stealth mode.
/// If the velocity of the motor goes above this value, Stealth mode is turned
/// off. Otherwise it is turned on. In Stealth mode the torque declines with high speed.
///
/// * Coolstep Threshold: Sets the lower threshold for Coolstep mode.
/// The Coolstep Threshold needs to be above the Stealth Threshold.
///
/// * Classic Threshold: Sets the lower threshold for classic mode.
/// In classic mode the stepper becomes more noisy, but the torque is maximized.
///
/// * High Velocity Chopper Mode: If High Velocity Chopper Mode is enabled, the stepper control
/// is optimized to run the stepper motors at high velocities.
///
/// If you want to use all three thresholds make sure that
/// Stealth Threshold < Coolstep Threshold < Classic Threshold.
pub fn set_basic_configuration(
&self,
standstill_current: u16,
motor_run_current: u16,
standstill_delay_time: u16,
power_down_time: u16,
stealth_threshold: u16,
coolstep_threshold: u16,
classic_threshold: u16,
high_velocity_chopper_mode: bool,
) -> ConvertingReceiver<()> {
let mut payload = vec![0; 15];
payload[0..2].copy_from_slice(&<u16>::to_le_byte_vec(standstill_current));
payload[2..4].copy_from_slice(&<u16>::to_le_byte_vec(motor_run_current));
payload[4..6].copy_from_slice(&<u16>::to_le_byte_vec(standstill_delay_time));
payload[6..8].copy_from_slice(&<u16>::to_le_byte_vec(power_down_time));
payload[8..10].copy_from_slice(&<u16>::to_le_byte_vec(stealth_threshold));
payload[10..12].copy_from_slice(&<u16>::to_le_byte_vec(coolstep_threshold));
payload[12..14].copy_from_slice(&<u16>::to_le_byte_vec(classic_threshold));
payload[14..15].copy_from_slice(&<bool>::to_le_byte_vec(high_velocity_chopper_mode));
self.device.set(u8::from(SilentStepperV2BrickletFunction::SetBasicConfiguration), payload)
}
/// Returns the configuration as set by [`set_basic_configuration`].
pub fn get_basic_configuration(&self) -> ConvertingReceiver<BasicConfiguration> {
let payload = vec![0; 0];
self.device.get(u8::from(SilentStepperV2BrickletFunction::GetBasicConfiguration), payload)
}
/// Note: If you don't know what any of this means you can very likely keep all of
/// the values as default!
///
/// Sets the Spreadcycle configuration parameters. Spreadcycle is a chopper algorithm which actively
/// controls the motor current flow. More information can be found in the TMC2130 datasheet on page
/// 47 (7 spreadCycle and Classic Chopper).
///
/// * Slow Decay Duration: Controls duration of off time setting of slow decay phase.
/// 0 = driver disabled, all bridges off. Use 1 only with Comparator Blank time >= 2.
///
/// * Enable Random Slow Decay: Set to false to fix chopper off time as set by Slow Decay Duration.
/// If you set it to true, Decay Duration is randomly modulated.
///
/// * Fast Decay Duration: Sets the fast decay duration. This parameters is
/// only used if the Chopper Mode is set to Fast Decay.
///
/// * Hysteresis Start Value: Sets the hysteresis start value. This parameter is
/// only used if the Chopper Mode is set to Spread Cycle.
///
/// * Hysteresis End Value: Sets the hysteresis end value. This parameter is
/// only used if the Chopper Mode is set to Spread Cycle.
///
/// * Sine Wave Offset: Sets the sine wave offset. This parameters is
/// only used if the Chopper Mode is set to Fast Decay. 1/512 of the value becomes added to the absolute
/// value of the sine wave.
///
/// * Chopper Mode: 0 = Spread Cycle, 1 = Fast Decay.
///
/// * Comparator Blank Time: Sets the blank time of the comparator. Available values are
///
/// * 0 = 16 clocks,
/// * 1 = 24 clocks,
/// * 2 = 36 clocks and
/// * 3 = 54 clocks.
///
/// A value of 1 or 2 is recommended for most applications.
///
/// * Fast Decay Without Comparator: If set to true the current comparator usage for termination of the
/// fast decay cycle is disabled.
///
/// Associated constants:
/// * SILENT_STEPPER_V2_BRICKLET_CHOPPER_MODE_SPREAD_CYCLE
/// * SILENT_STEPPER_V2_BRICKLET_CHOPPER_MODE_FAST_DECAY
pub fn set_spreadcycle_configuration(
&self,
slow_decay_duration: u8,
enable_random_slow_decay: bool,
fast_decay_duration: u8,
hysteresis_start_value: u8,
hysteresis_end_value: i8,
sine_wave_offset: i8,
chopper_mode: u8,
comparator_blank_time: u8,
fast_decay_without_comparator: bool,
) -> ConvertingReceiver<()> {
let mut payload = vec![0; 9];
payload[0..1].copy_from_slice(&<u8>::to_le_byte_vec(slow_decay_duration));
payload[1..2].copy_from_slice(&<bool>::to_le_byte_vec(enable_random_slow_decay));
payload[2..3].copy_from_slice(&<u8>::to_le_byte_vec(fast_decay_duration));
payload[3..4].copy_from_slice(&<u8>::to_le_byte_vec(hysteresis_start_value));
payload[4..5].copy_from_slice(&<i8>::to_le_byte_vec(hysteresis_end_value));
payload[5..6].copy_from_slice(&<i8>::to_le_byte_vec(sine_wave_offset));
payload[6..7].copy_from_slice(&<u8>::to_le_byte_vec(chopper_mode));
payload[7..8].copy_from_slice(&<u8>::to_le_byte_vec(comparator_blank_time));
payload[8..9].copy_from_slice(&<bool>::to_le_byte_vec(fast_decay_without_comparator));
self.device.set(u8::from(SilentStepperV2BrickletFunction::SetSpreadcycleConfiguration), payload)
}
/// Returns the configuration as set by [`set_basic_configuration`].
///
/// Associated constants:
/// * SILENT_STEPPER_V2_BRICKLET_CHOPPER_MODE_SPREAD_CYCLE
/// * SILENT_STEPPER_V2_BRICKLET_CHOPPER_MODE_FAST_DECAY
pub fn get_spreadcycle_configuration(&self) -> ConvertingReceiver<SpreadcycleConfiguration> {
let payload = vec![0; 0];
self.device.get(u8::from(SilentStepperV2BrickletFunction::GetSpreadcycleConfiguration), payload)
}
/// Note: If you don't know what any of this means you can very likely keep all of
/// the values as default!
///
/// Sets the configuration relevant for Stealth mode.
///
/// * Enable Stealth: If set to true the stealth mode is enabled, if set to false the
/// stealth mode is disabled, even if the speed is below the threshold set in [`set_basic_configuration`].
///
/// * Amplitude: If autoscale is disabled, the PWM amplitude is scaled by this value. If autoscale is enabled,
/// this value defines the maximum PWM amplitude change per half wave.
///
/// * Gradient: If autoscale is disabled, the PWM gradient is scaled by this value. If autoscale is enabled,
/// this value defines the maximum PWM gradient. With autoscale a value above 64 is recommended,
/// otherwise the regulation might not be able to measure the current.
///
/// * Enable Autoscale: If set to true, automatic current control is used. Otherwise the user defined
/// amplitude and gradient are used.
///
/// * Force Symmetric: If true, A symmetric PWM cycle is enforced. Otherwise the PWM value may change within each
/// PWM cycle.
///
/// * Freewheel Mode: The freewheel mode defines the behavior in stand still if the Standstill Current
/// (see [`set_basic_configuration`]) is set to 0.
///
/// Associated constants:
/// * SILENT_STEPPER_V2_BRICKLET_FREEWHEEL_MODE_NORMAL
/// * SILENT_STEPPER_V2_BRICKLET_FREEWHEEL_MODE_FREEWHEELING
/// * SILENT_STEPPER_V2_BRICKLET_FREEWHEEL_MODE_COIL_SHORT_LS
/// * SILENT_STEPPER_V2_BRICKLET_FREEWHEEL_MODE_COIL_SHORT_HS
pub fn set_stealth_configuration(
&self,
enable_stealth: bool,
amplitude: u8,
gradient: u8,
enable_autoscale: bool,
force_symmetric: bool,
freewheel_mode: u8,
) -> ConvertingReceiver<()> {
let mut payload = vec![0; 6];
payload[0..1].copy_from_slice(&<bool>::to_le_byte_vec(enable_stealth));
payload[1..2].copy_from_slice(&<u8>::to_le_byte_vec(amplitude));
payload[2..3].copy_from_slice(&<u8>::to_le_byte_vec(gradient));
payload[3..4].copy_from_slice(&<bool>::to_le_byte_vec(enable_autoscale));
payload[4..5].copy_from_slice(&<bool>::to_le_byte_vec(force_symmetric));
payload[5..6].copy_from_slice(&<u8>::to_le_byte_vec(freewheel_mode));
self.device.set(u8::from(SilentStepperV2BrickletFunction::SetStealthConfiguration), payload)
}
/// Returns the configuration as set by [`set_stealth_configuration`].
///
/// Associated constants:
/// * SILENT_STEPPER_V2_BRICKLET_FREEWHEEL_MODE_NORMAL
/// * SILENT_STEPPER_V2_BRICKLET_FREEWHEEL_MODE_FREEWHEELING
/// * SILENT_STEPPER_V2_BRICKLET_FREEWHEEL_MODE_COIL_SHORT_LS
/// * SILENT_STEPPER_V2_BRICKLET_FREEWHEEL_MODE_COIL_SHORT_HS
pub fn get_stealth_configuration(&self) -> ConvertingReceiver<StealthConfiguration> {
let payload = vec![0; 0];
self.device.get(u8::from(SilentStepperV2BrickletFunction::GetStealthConfiguration), payload)
}
/// Note: If you don't know what any of this means you can very likely keep all of
/// the values as default!
///
/// Sets the configuration relevant for Coolstep.
///
/// * Minimum Stallguard Value: If the Stallguard result falls below this value*32, the motor current
/// is increased to reduce motor load angle. A value of 0 turns Coolstep off.
///
/// * Maximum Stallguard Value: If the Stallguard result goes above
/// (Min Stallguard Value + Max Stallguard Value + 1) * 32, the motor current is decreased to save
/// energy.
///
/// * Current Up Step Width: Sets the up step increment per Stallguard value. The value range is 0-3,
/// corresponding to the increments 1, 2, 4 and 8.
///
/// * Current Down Step Width: Sets the down step decrement per Stallguard value. The value range is 0-3,
/// corresponding to the decrements 1, 2, 8 and 16.
///
/// * Minimum Current: Sets the minimum current for Coolstep current control. You can choose between
/// half and quarter of the run current.
///
/// * Stallguard Threshold Value: Sets the level for stall output (see [`get_driver_status`]).
/// A lower value gives a higher sensitivity. You have to find a suitable value for your
/// motor by trial and error, 0 works for most motors.
///
/// * Stallguard Mode: Set to 0 for standard resolution or 1 for filtered mode. In filtered mode the Stallguard
/// signal will be updated every four full-steps.
///
/// Associated constants:
/// * SILENT_STEPPER_V2_BRICKLET_CURRENT_UP_STEP_INCREMENT_1
/// * SILENT_STEPPER_V2_BRICKLET_CURRENT_UP_STEP_INCREMENT_2
/// * SILENT_STEPPER_V2_BRICKLET_CURRENT_UP_STEP_INCREMENT_4
/// * SILENT_STEPPER_V2_BRICKLET_CURRENT_UP_STEP_INCREMENT_8
/// * SILENT_STEPPER_V2_BRICKLET_CURRENT_DOWN_STEP_DECREMENT_1
/// * SILENT_STEPPER_V2_BRICKLET_CURRENT_DOWN_STEP_DECREMENT_2
/// * SILENT_STEPPER_V2_BRICKLET_CURRENT_DOWN_STEP_DECREMENT_8
/// * SILENT_STEPPER_V2_BRICKLET_CURRENT_DOWN_STEP_DECREMENT_32
/// * SILENT_STEPPER_V2_BRICKLET_MINIMUM_CURRENT_HALF
/// * SILENT_STEPPER_V2_BRICKLET_MINIMUM_CURRENT_QUARTER
/// * SILENT_STEPPER_V2_BRICKLET_STALLGUARD_MODE_STANDARD
/// * SILENT_STEPPER_V2_BRICKLET_STALLGUARD_MODE_FILTERED
pub fn set_coolstep_configuration(
&self,
minimum_stallguard_value: u8,
maximum_stallguard_value: u8,
current_up_step_width: u8,
current_down_step_width: u8,
minimum_current: u8,
stallguard_threshold_value: i8,
stallguard_mode: u8,
) -> ConvertingReceiver<()> {
let mut payload = vec![0; 7];
payload[0..1].copy_from_slice(&<u8>::to_le_byte_vec(minimum_stallguard_value));
payload[1..2].copy_from_slice(&<u8>::to_le_byte_vec(maximum_stallguard_value));
payload[2..3].copy_from_slice(&<u8>::to_le_byte_vec(current_up_step_width));
payload[3..4].copy_from_slice(&<u8>::to_le_byte_vec(current_down_step_width));
payload[4..5].copy_from_slice(&<u8>::to_le_byte_vec(minimum_current));
payload[5..6].copy_from_slice(&<i8>::to_le_byte_vec(stallguard_threshold_value));
payload[6..7].copy_from_slice(&<u8>::to_le_byte_vec(stallguard_mode));
self.device.set(u8::from(SilentStepperV2BrickletFunction::SetCoolstepConfiguration), payload)
}
/// Returns the configuration as set by [`set_coolstep_configuration`].
///
/// Associated constants:
/// * SILENT_STEPPER_V2_BRICKLET_CURRENT_UP_STEP_INCREMENT_1
/// * SILENT_STEPPER_V2_BRICKLET_CURRENT_UP_STEP_INCREMENT_2
/// * SILENT_STEPPER_V2_BRICKLET_CURRENT_UP_STEP_INCREMENT_4
/// * SILENT_STEPPER_V2_BRICKLET_CURRENT_UP_STEP_INCREMENT_8
/// * SILENT_STEPPER_V2_BRICKLET_CURRENT_DOWN_STEP_DECREMENT_1
/// * SILENT_STEPPER_V2_BRICKLET_CURRENT_DOWN_STEP_DECREMENT_2
/// * SILENT_STEPPER_V2_BRICKLET_CURRENT_DOWN_STEP_DECREMENT_8
/// * SILENT_STEPPER_V2_BRICKLET_CURRENT_DOWN_STEP_DECREMENT_32
/// * SILENT_STEPPER_V2_BRICKLET_MINIMUM_CURRENT_HALF
/// * SILENT_STEPPER_V2_BRICKLET_MINIMUM_CURRENT_QUARTER
/// * SILENT_STEPPER_V2_BRICKLET_STALLGUARD_MODE_STANDARD
/// * SILENT_STEPPER_V2_BRICKLET_STALLGUARD_MODE_FILTERED
pub fn get_coolstep_configuration(&self) -> ConvertingReceiver<CoolstepConfiguration> {
let payload = vec![0; 0];
self.device.get(u8::from(SilentStepperV2BrickletFunction::GetCoolstepConfiguration), payload)
}
/// Note: If you don't know what any of this means you can very likely keep all of
/// the values as default!
///
/// Sets miscellaneous configuration parameters.
///
/// * Disable Short To Ground Protection: Set to false to enable short to ground protection, otherwise
/// it is disabled.
///
/// * Synchronize Phase Frequency: With this parameter you can synchronize the chopper for both phases
/// of a two phase motor to avoid the occurrence of a beat. The value range is 0-15. If set to 0,
/// the synchronization is turned off. Otherwise the synchronization is done through the formula
/// f_sync = f_clk/(value*64). In Classic Mode the synchronization is automatically switched off.
/// f_clk is 12.8MHz.
pub fn set_misc_configuration(
&self,
disable_short_to_ground_protection: bool,
synchronize_phase_frequency: u8,
) -> ConvertingReceiver<()> {
let mut payload = vec![0; 2];
payload[0..1].copy_from_slice(&<bool>::to_le_byte_vec(disable_short_to_ground_protection));
payload[1..2].copy_from_slice(&<u8>::to_le_byte_vec(synchronize_phase_frequency));
self.device.set(u8::from(SilentStepperV2BrickletFunction::SetMiscConfiguration), payload)
}
/// Returns the configuration as set by [`set_misc_configuration`].
pub fn get_misc_configuration(&self) -> ConvertingReceiver<MiscConfiguration> {
let payload = vec![0; 0];
self.device.get(u8::from(SilentStepperV2BrickletFunction::GetMiscConfiguration), payload)
}
/// Configures the error LED to be either turned off, turned on, blink in
/// heartbeat mode or show an error.
///
/// If the LED is configured to show errors it has three different states:
///
/// * Off: No error present.
/// * 250ms interval blink: Overtemperature warning.
/// * 1s interval blink: Input voltage too small.
/// * full red: motor disabled because of short to ground in phase a or b or because of overtemperature.
///
/// Associated constants:
/// * SILENT_STEPPER_V2_BRICKLET_ERROR_LED_CONFIG_OFF
/// * SILENT_STEPPER_V2_BRICKLET_ERROR_LED_CONFIG_ON
/// * SILENT_STEPPER_V2_BRICKLET_ERROR_LED_CONFIG_SHOW_HEARTBEAT
/// * SILENT_STEPPER_V2_BRICKLET_ERROR_LED_CONFIG_SHOW_ERROR
pub fn set_error_led_config(&self, config: u8) -> ConvertingReceiver<()> {
let mut payload = vec![0; 1];
payload[0..1].copy_from_slice(&<u8>::to_le_byte_vec(config));
self.device.set(u8::from(SilentStepperV2BrickletFunction::SetErrorLedConfig), payload)
}
/// Returns the LED configuration as set by [`set_error_led_config`]
///
/// Associated constants:
/// * SILENT_STEPPER_V2_BRICKLET_ERROR_LED_CONFIG_OFF
/// * SILENT_STEPPER_V2_BRICKLET_ERROR_LED_CONFIG_ON
/// * SILENT_STEPPER_V2_BRICKLET_ERROR_LED_CONFIG_SHOW_HEARTBEAT
/// * SILENT_STEPPER_V2_BRICKLET_ERROR_LED_CONFIG_SHOW_ERROR
pub fn get_error_led_config(&self) -> ConvertingReceiver<u8> {
let payload = vec![0; 0];
self.device.get(u8::from(SilentStepperV2BrickletFunction::GetErrorLedConfig), payload)
}
/// Returns the current driver status.
///
/// * Open Load: Indicates if an open load is present on phase A, B or both. This could mean that there is a problem
/// with the wiring of the motor. False detection can occur in fast motion as well as during stand still.
///
/// * Short To Ground: Indicates if a short to ground is present on phase A, B or both. If this is detected the driver
/// automatically becomes disabled and stays disabled until it is enabled again manually.
///
/// * Over Temperature: The over temperature indicator switches to Warning if the driver IC warms up. The warning flag
/// is expected during long duration stepper uses. If the temperature limit is reached the indicator switches
/// to Limit. In this case the driver becomes disabled until it cools down again.
///
/// * Motor Stalled: Is true if a motor stall was detected.
///
/// * Actual Motor Current: Indicates the actual current control scaling as used in Coolstep mode.
/// It represents a multiplier of 1/32 to 32/32 of the
/// ``Motor Run Current`` as set by [`set_basic_configuration`]. Example: If a ``Motor Run Current``
/// of 1000mA was set and the returned value is 15, the ``Actual Motor Current`` is 16/32*1000mA = 500mA.
///
/// * Stallguard Result: Indicates the load of the motor. A lower value signals a higher load. Per trial and error
/// you can find out which value corresponds to a suitable torque for the velocity used in your application.
/// After that you can use this threshold value to find out if a motor stall becomes probable and react on it (e.g.
/// decrease velocity).
/// During stand still this value can not be used for stall detection, it shows the chopper on-time for motor coil A.
///
/// * Stealth Voltage Amplitude: Shows the actual PWM scaling. In Stealth mode it can be used to detect motor load and
/// stall if autoscale is enabled (see [`set_stealth_configuration`]).
///
/// Associated constants:
/// * SILENT_STEPPER_V2_BRICKLET_OPEN_LOAD_NONE
/// * SILENT_STEPPER_V2_BRICKLET_OPEN_LOAD_PHASE_A
/// * SILENT_STEPPER_V2_BRICKLET_OPEN_LOAD_PHASE_B
/// * SILENT_STEPPER_V2_BRICKLET_OPEN_LOAD_PHASE_AB
/// * SILENT_STEPPER_V2_BRICKLET_SHORT_TO_GROUND_NONE
/// * SILENT_STEPPER_V2_BRICKLET_SHORT_TO_GROUND_PHASE_A
/// * SILENT_STEPPER_V2_BRICKLET_SHORT_TO_GROUND_PHASE_B
/// * SILENT_STEPPER_V2_BRICKLET_SHORT_TO_GROUND_PHASE_AB
/// * SILENT_STEPPER_V2_BRICKLET_OVER_TEMPERATURE_NONE
/// * SILENT_STEPPER_V2_BRICKLET_OVER_TEMPERATURE_WARNING
/// * SILENT_STEPPER_V2_BRICKLET_OVER_TEMPERATURE_LIMIT
pub fn get_driver_status(&self) -> ConvertingReceiver<DriverStatus> {
let payload = vec![0; 0];
self.device.get(u8::from(SilentStepperV2BrickletFunction::GetDriverStatus), payload)
}
/// Sets the minimum voltage, below which the [`get_under_voltage_callback_receiver`] receiver
/// is triggered. The minimum possible value that works with the Silent Stepper
/// Bricklet 2.0 is 8V.
/// You can use this function to detect the discharge of a battery that is used
/// to drive the stepper motor. If you have a fixed power supply, you likely do
/// not need this functionality.
pub fn set_minimum_voltage(&self, voltage: u16) -> ConvertingReceiver<()> {
let mut payload = vec![0; 2];
payload[0..2].copy_from_slice(&<u16>::to_le_byte_vec(voltage));
self.device.set(u8::from(SilentStepperV2BrickletFunction::SetMinimumVoltage), payload)
}
/// Returns the minimum voltage as set by [`set_minimum_voltage`].
pub fn get_minimum_voltage(&self) -> ConvertingReceiver<u16> {
let payload = vec![0; 0];
self.device.get(u8::from(SilentStepperV2BrickletFunction::GetMinimumVoltage), payload)
}
/// Sets the time base of the velocity and the acceleration of the Silent Stepper
/// Bricklet 2.0.
///
/// For example, if you want to make one step every 1.5 seconds, you can set
/// the time base to 15 and the velocity to 10. Now the velocity is
/// 10steps/15s = 1steps/1.5s.
pub fn set_time_base(&self, time_base: u32) -> ConvertingReceiver<()> {
let mut payload = vec![0; 4];
payload[0..4].copy_from_slice(&<u32>::to_le_byte_vec(time_base));
self.device.set(u8::from(SilentStepperV2BrickletFunction::SetTimeBase), payload)
}
/// Returns the time base as set by [`set_time_base`].
pub fn get_time_base(&self) -> ConvertingReceiver<u32> {
let payload = vec![0; 0];
self.device.get(u8::from(SilentStepperV2BrickletFunction::GetTimeBase), payload)
}
/// Returns the following parameters: The current velocity,
/// the current position, the remaining steps, the stack voltage, the external
/// voltage and the current consumption of the stepper motor.
///
/// The current consumption is calculated by multiplying the ``Actual Motor Current``
/// value (see [`set_basic_configuration`]) with the ``Motor Run Current``
/// (see [`get_driver_status`]). This is an internal calculation of the
/// driver, not an independent external measurement.
///
/// The current consumption calculation was broken up to firmware 2.0.1, it is fixed
/// since firmware 2.0.2.
///
/// There is also a receiver for this function, see [`get_all_data_callback_receiver`] receiver.
pub fn get_all_data(&self) -> ConvertingReceiver<AllData> {
let payload = vec![0; 0];
self.device.get(u8::from(SilentStepperV2BrickletFunction::GetAllData), payload)
}
/// Sets the period with which the [`get_all_data_callback_receiver`] receiver is triggered
/// periodically. A value of 0 turns the receiver off.
pub fn set_all_callback_configuration(&self, period: u32) -> ConvertingReceiver<()> {
let mut payload = vec![0; 4];
payload[0..4].copy_from_slice(&<u32>::to_le_byte_vec(period));
self.device.set(u8::from(SilentStepperV2BrickletFunction::SetAllCallbackConfiguration), payload)
}
/// Returns the period as set by [`set_all_callback_configuration`].
pub fn get_all_data_callback_configuraton(&self) -> ConvertingReceiver<u32> {
let payload = vec![0; 0];
self.device.get(u8::from(SilentStepperV2BrickletFunction::GetAllDataCallbackConfiguraton), payload)
}
/// Sets the GPIO configuration for the given channel.
/// You can configure a debounce and the deceleration that is used if the action is
/// configured as ``normal stop``. See [`set_gpio_action`].
pub fn set_gpio_configuration(&self, channel: u8, debounce: u16, stop_deceleration: u16) -> ConvertingReceiver<()> {
let mut payload = vec![0; 5];
payload[0..1].copy_from_slice(&<u8>::to_le_byte_vec(channel));
payload[1..3].copy_from_slice(&<u16>::to_le_byte_vec(debounce));
payload[3..5].copy_from_slice(&<u16>::to_le_byte_vec(stop_deceleration));
self.device.set(u8::from(SilentStepperV2BrickletFunction::SetGpioConfiguration), payload)
}
/// Returns the GPIO configuration for a channel as set by [`set_gpio_configuration`].
pub fn get_gpio_configuration(&self, channel: u8) -> ConvertingReceiver<GpioConfiguration> {
let mut payload = vec![0; 1];
payload[0..1].copy_from_slice(&<u8>::to_le_byte_vec(channel));
self.device.get(u8::from(SilentStepperV2BrickletFunction::GetGpioConfiguration), payload)
}
/// Sets the GPIO action for the given channel.
///
/// The action can be a normal stop, a full brake or a receiver. Each for a rising
/// edge or falling edge. The actions are a bitmask they can be used at the same time.
/// You can for example trigger a full brake and a receiver at the same time or for
/// rising and falling edge.
///
/// The deceleration speed for the normal stop can be configured with
/// [`set_gpio_configuration`].
///
/// Associated constants:
/// * SILENT_STEPPER_V2_BRICKLET_GPIO_ACTION_NONE
/// * SILENT_STEPPER_V2_BRICKLET_GPIO_ACTION_NORMAL_STOP_RISING_EDGE
/// * SILENT_STEPPER_V2_BRICKLET_GPIO_ACTION_NORMAL_STOP_FALLING_EDGE
/// * SILENT_STEPPER_V2_BRICKLET_GPIO_ACTION_FULL_BRAKE_RISING_EDGE
/// * SILENT_STEPPER_V2_BRICKLET_GPIO_ACTION_FULL_BRAKE_FALLING_EDGE
/// * SILENT_STEPPER_V2_BRICKLET_GPIO_ACTION_CALLBACK_RISING_EDGE
/// * SILENT_STEPPER_V2_BRICKLET_GPIO_ACTION_CALLBACK_FALLING_EDGE
pub fn set_gpio_action(&self, channel: u8, action: u32) -> ConvertingReceiver<()> {
let mut payload = vec![0; 5];
payload[0..1].copy_from_slice(&<u8>::to_le_byte_vec(channel));
payload[1..5].copy_from_slice(&<u32>::to_le_byte_vec(action));
self.device.set(u8::from(SilentStepperV2BrickletFunction::SetGpioAction), payload)
}
/// Returns the GPIO action for a channel as set by [`set_gpio_action`].
///
/// Associated constants:
/// * SILENT_STEPPER_V2_BRICKLET_GPIO_ACTION_NONE
/// * SILENT_STEPPER_V2_BRICKLET_GPIO_ACTION_NORMAL_STOP_RISING_EDGE
/// * SILENT_STEPPER_V2_BRICKLET_GPIO_ACTION_NORMAL_STOP_FALLING_EDGE
/// * SILENT_STEPPER_V2_BRICKLET_GPIO_ACTION_FULL_BRAKE_RISING_EDGE
/// * SILENT_STEPPER_V2_BRICKLET_GPIO_ACTION_FULL_BRAKE_FALLING_EDGE
/// * SILENT_STEPPER_V2_BRICKLET_GPIO_ACTION_CALLBACK_RISING_EDGE
/// * SILENT_STEPPER_V2_BRICKLET_GPIO_ACTION_CALLBACK_FALLING_EDGE
pub fn get_gpio_action(&self, channel: u8) -> ConvertingReceiver<u32> {
let mut payload = vec![0; 1];
payload[0..1].copy_from_slice(&<u8>::to_le_byte_vec(channel));
self.device.get(u8::from(SilentStepperV2BrickletFunction::GetGpioAction), payload)
}
/// Returns the GPIO state for both channels. True if the state is ``high`` and
/// false if the state is ``low``.
pub fn get_gpio_state(&self) -> ConvertingReceiver<[bool; 2]> {
let payload = vec![0; 0];
self.device.get(u8::from(SilentStepperV2BrickletFunction::GetGpioState), payload)
}
/// Returns the error count for the communication between Brick and Bricklet.
///
/// The errors are divided into
///
/// * ACK checksum errors,
/// * message checksum errors,
/// * framing errors and
/// * overflow errors.
///
/// The errors counts are for errors that occur on the Bricklet side. All
/// Bricks have a similar function that returns the errors on the Brick side.
pub fn get_spitfp_error_count(&self) -> ConvertingReceiver<SpitfpErrorCount> {
let payload = vec![0; 0];
self.device.get(u8::from(SilentStepperV2BrickletFunction::GetSpitfpErrorCount), payload)
}
/// Sets the bootloader mode and returns the status after the requested
/// mode change was instigated.
///
/// You can change from bootloader mode to firmware mode and vice versa. A change
/// from bootloader mode to firmware mode will only take place if the entry function,
/// device identifier and CRC are present and correct.
///
/// This function is used by Brick Viewer during flashing. It should not be
/// necessary to call it in a normal user program.
///
/// Associated constants:
/// * SILENT_STEPPER_V2_BRICKLET_BOOTLOADER_MODE_BOOTLOADER
/// * SILENT_STEPPER_V2_BRICKLET_BOOTLOADER_MODE_FIRMWARE
/// * SILENT_STEPPER_V2_BRICKLET_BOOTLOADER_MODE_BOOTLOADER_WAIT_FOR_REBOOT
/// * SILENT_STEPPER_V2_BRICKLET_BOOTLOADER_MODE_FIRMWARE_WAIT_FOR_REBOOT
/// * SILENT_STEPPER_V2_BRICKLET_BOOTLOADER_MODE_FIRMWARE_WAIT_FOR_ERASE_AND_REBOOT
/// * SILENT_STEPPER_V2_BRICKLET_BOOTLOADER_STATUS_OK
/// * SILENT_STEPPER_V2_BRICKLET_BOOTLOADER_STATUS_INVALID_MODE
/// * SILENT_STEPPER_V2_BRICKLET_BOOTLOADER_STATUS_NO_CHANGE
/// * SILENT_STEPPER_V2_BRICKLET_BOOTLOADER_STATUS_ENTRY_FUNCTION_NOT_PRESENT
/// * SILENT_STEPPER_V2_BRICKLET_BOOTLOADER_STATUS_DEVICE_IDENTIFIER_INCORRECT
/// * SILENT_STEPPER_V2_BRICKLET_BOOTLOADER_STATUS_CRC_MISMATCH
pub fn set_bootloader_mode(&self, mode: u8) -> ConvertingReceiver<u8> {
let mut payload = vec![0; 1];
payload[0..1].copy_from_slice(&<u8>::to_le_byte_vec(mode));
self.device.get(u8::from(SilentStepperV2BrickletFunction::SetBootloaderMode), payload)
}
/// Returns the current bootloader mode, see [`set_bootloader_mode`].
///
/// Associated constants:
/// * SILENT_STEPPER_V2_BRICKLET_BOOTLOADER_MODE_BOOTLOADER
/// * SILENT_STEPPER_V2_BRICKLET_BOOTLOADER_MODE_FIRMWARE
/// * SILENT_STEPPER_V2_BRICKLET_BOOTLOADER_MODE_BOOTLOADER_WAIT_FOR_REBOOT
/// * SILENT_STEPPER_V2_BRICKLET_BOOTLOADER_MODE_FIRMWARE_WAIT_FOR_REBOOT
/// * SILENT_STEPPER_V2_BRICKLET_BOOTLOADER_MODE_FIRMWARE_WAIT_FOR_ERASE_AND_REBOOT
pub fn get_bootloader_mode(&self) -> ConvertingReceiver<u8> {
let payload = vec![0; 0];
self.device.get(u8::from(SilentStepperV2BrickletFunction::GetBootloaderMode), payload)
}
/// Sets the firmware pointer for [`write_firmware`]. The pointer has
/// to be increased by chunks of size 64. The data is written to flash
/// every 4 chunks (which equals to one page of size 256).
///
/// This function is used by Brick Viewer during flashing. It should not be
/// necessary to call it in a normal user program.
pub fn set_write_firmware_pointer(&self, pointer: u32) -> ConvertingReceiver<()> {
let mut payload = vec![0; 4];
payload[0..4].copy_from_slice(&<u32>::to_le_byte_vec(pointer));
self.device.set(u8::from(SilentStepperV2BrickletFunction::SetWriteFirmwarePointer), payload)
}
/// Writes 64 Bytes of firmware at the position as written by
/// [`set_write_firmware_pointer`] before. The firmware is written
/// to flash every 4 chunks.
///
/// You can only write firmware in bootloader mode.
///
/// This function is used by Brick Viewer during flashing. It should not be
/// necessary to call it in a normal user program.
pub fn write_firmware(&self, data: [u8; 64]) -> ConvertingReceiver<u8> {
let mut payload = vec![0; 64];
payload[0..64].copy_from_slice(&<[u8; 64]>::to_le_byte_vec(data));
self.device.get(u8::from(SilentStepperV2BrickletFunction::WriteFirmware), payload)
}
/// Sets the status LED configuration. By default the LED shows
/// communication traffic between Brick and Bricklet, it flickers once
/// for every 10 received data packets.
///
/// You can also turn the LED permanently on/off or show a heartbeat.
///
/// If the Bricklet is in bootloader mode, the LED is will show heartbeat by default.
///
/// Associated constants:
/// * SILENT_STEPPER_V2_BRICKLET_STATUS_LED_CONFIG_OFF
/// * SILENT_STEPPER_V2_BRICKLET_STATUS_LED_CONFIG_ON
/// * SILENT_STEPPER_V2_BRICKLET_STATUS_LED_CONFIG_SHOW_HEARTBEAT
/// * SILENT_STEPPER_V2_BRICKLET_STATUS_LED_CONFIG_SHOW_STATUS
pub fn set_status_led_config(&self, config: u8) -> ConvertingReceiver<()> {
let mut payload = vec![0; 1];
payload[0..1].copy_from_slice(&<u8>::to_le_byte_vec(config));
self.device.set(u8::from(SilentStepperV2BrickletFunction::SetStatusLedConfig), payload)
}
/// Returns the configuration as set by [`set_status_led_config`]
///
/// Associated constants:
/// * SILENT_STEPPER_V2_BRICKLET_STATUS_LED_CONFIG_OFF
/// * SILENT_STEPPER_V2_BRICKLET_STATUS_LED_CONFIG_ON
/// * SILENT_STEPPER_V2_BRICKLET_STATUS_LED_CONFIG_SHOW_HEARTBEAT
/// * SILENT_STEPPER_V2_BRICKLET_STATUS_LED_CONFIG_SHOW_STATUS
pub fn get_status_led_config(&self) -> ConvertingReceiver<u8> {
let payload = vec![0; 0];
self.device.get(u8::from(SilentStepperV2BrickletFunction::GetStatusLedConfig), payload)
}
/// Returns the temperature as measured inside the microcontroller. The
/// value returned is not the ambient temperature!
///
/// The temperature is only proportional to the real temperature and it has bad
/// accuracy. Practically it is only useful as an indicator for
/// temperature changes.
pub fn get_chip_temperature(&self) -> ConvertingReceiver<i16> {
let payload = vec![0; 0];
self.device.get(u8::from(SilentStepperV2BrickletFunction::GetChipTemperature), payload)
}
/// Calling this function will reset the Bricklet. All configurations
/// will be lost.
///
/// After a reset you have to create new device objects,
/// calling functions on the existing ones will result in
/// undefined behavior!
pub fn reset(&self) -> ConvertingReceiver<()> {
let payload = vec![0; 0];
self.device.set(u8::from(SilentStepperV2BrickletFunction::Reset), payload)
}
/// Writes a new UID into flash. If you want to set a new UID
/// you have to decode the Base58 encoded UID string into an
/// integer first.
///
/// We recommend that you use Brick Viewer to change the UID.
pub fn write_uid(&self, uid: u32) -> ConvertingReceiver<()> {
let mut payload = vec![0; 4];
payload[0..4].copy_from_slice(&<u32>::to_le_byte_vec(uid));
self.device.set(u8::from(SilentStepperV2BrickletFunction::WriteUid), payload)
}
/// Returns the current UID as an integer. Encode as
/// Base58 to get the usual string version.
pub fn read_uid(&self) -> ConvertingReceiver<u32> {
let payload = vec![0; 0];
self.device.get(u8::from(SilentStepperV2BrickletFunction::ReadUid), payload)
}
/// Returns the UID, the UID where the Bricklet is connected to,
/// the position, the hardware and firmware version as well as the
/// device identifier.
///
/// The position can be 'a', 'b', 'c', 'd', 'e', 'f', 'g' or 'h' (Bricklet Port).
/// A Bricklet connected to an [Isolator Bricklet](isolator_bricklet) is always at
/// position 'z'.
///
/// The device identifier numbers can be found [here](device_identifier).
/// |device_identifier_constant|
pub fn get_identity(&self) -> ConvertingReceiver<Identity> {
let payload = vec![0; 0];
self.device.get(u8::from(SilentStepperV2BrickletFunction::GetIdentity), payload)
}
}