#[doc = "Register `APB1ENR1` reader"]
pub struct R(crate::R<APB1ENR1_SPEC>);
impl core::ops::Deref for R {
    type Target = crate::R<APB1ENR1_SPEC>;
    #[inline(always)]
    fn deref(&self) -> &Self::Target {
        &self.0
    }
}
impl From<crate::R<APB1ENR1_SPEC>> for R {
    #[inline(always)]
    fn from(reader: crate::R<APB1ENR1_SPEC>) -> Self {
        R(reader)
    }
}
#[doc = "Register `APB1ENR1` writer"]
pub struct W(crate::W<APB1ENR1_SPEC>);
impl core::ops::Deref for W {
    type Target = crate::W<APB1ENR1_SPEC>;
    #[inline(always)]
    fn deref(&self) -> &Self::Target {
        &self.0
    }
}
impl core::ops::DerefMut for W {
    #[inline(always)]
    fn deref_mut(&mut self) -> &mut Self::Target {
        &mut self.0
    }
}
impl From<crate::W<APB1ENR1_SPEC>> for W {
    #[inline(always)]
    fn from(writer: crate::W<APB1ENR1_SPEC>) -> Self {
        W(writer)
    }
}
#[doc = "Low power timer 1 clock enable\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq)]
pub enum LPTIM1EN_A {
    #[doc = "0: LPTIM1 clock disabled"]
    Disabled = 0,
    #[doc = "1: LPTIM1 clock enabled"]
    Enabled = 1,
}
impl From<LPTIM1EN_A> for bool {
    #[inline(always)]
    fn from(variant: LPTIM1EN_A) -> Self {
        variant as u8 != 0
    }
}
#[doc = "Field `LPTIM1EN` reader - Low power timer 1 clock enable"]
pub type LPTIM1EN_R = crate::BitReader<LPTIM1EN_A>;
impl LPTIM1EN_R {
    #[doc = "Get enumerated values variant"]
    #[inline(always)]
    pub fn variant(&self) -> LPTIM1EN_A {
        match self.bits {
            false => LPTIM1EN_A::Disabled,
            true => LPTIM1EN_A::Enabled,
        }
    }
    #[doc = "Checks if the value of the field is `Disabled`"]
    #[inline(always)]
    pub fn is_disabled(&self) -> bool {
        *self == LPTIM1EN_A::Disabled
    }
    #[doc = "Checks if the value of the field is `Enabled`"]
    #[inline(always)]
    pub fn is_enabled(&self) -> bool {
        *self == LPTIM1EN_A::Enabled
    }
}
#[doc = "Field `LPTIM1EN` writer - Low power timer 1 clock enable"]
pub type LPTIM1EN_W<'a, const O: u8> = crate::BitWriter<'a, u32, APB1ENR1_SPEC, LPTIM1EN_A, O>;
impl<'a, const O: u8> LPTIM1EN_W<'a, O> {
    #[doc = "LPTIM1 clock disabled"]
    #[inline(always)]
    pub fn disabled(self) -> &'a mut W {
        self.variant(LPTIM1EN_A::Disabled)
    }
    #[doc = "LPTIM1 clock enabled"]
    #[inline(always)]
    pub fn enabled(self) -> &'a mut W {
        self.variant(LPTIM1EN_A::Enabled)
    }
}
#[doc = "Field `OPAMPEN` reader - OPAMP interface clock enable"]
pub type OPAMPEN_R = crate::BitReader<bool>;
#[doc = "Field `OPAMPEN` writer - OPAMP interface clock enable"]
pub type OPAMPEN_W<'a, const O: u8> = crate::BitWriter<'a, u32, APB1ENR1_SPEC, bool, O>;
#[doc = "Field `DAC1EN` reader - DAC1 interface clock enable"]
pub type DAC1EN_R = crate::BitReader<bool>;
#[doc = "Field `DAC1EN` writer - DAC1 interface clock enable"]
pub type DAC1EN_W<'a, const O: u8> = crate::BitWriter<'a, u32, APB1ENR1_SPEC, bool, O>;
#[doc = "Field `PWREN` reader - Power interface clock enable"]
pub type PWREN_R = crate::BitReader<bool>;
#[doc = "Field `PWREN` writer - Power interface clock enable"]
pub type PWREN_W<'a, const O: u8> = crate::BitWriter<'a, u32, APB1ENR1_SPEC, bool, O>;
#[doc = "Field `CAN1EN` reader - CAN1 clock enable"]
pub type CAN1EN_R = crate::BitReader<bool>;
#[doc = "Field `CAN1EN` writer - CAN1 clock enable"]
pub type CAN1EN_W<'a, const O: u8> = crate::BitWriter<'a, u32, APB1ENR1_SPEC, bool, O>;
#[doc = "I2C3 clock enable\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq)]
pub enum I2C3EN_A {
    #[doc = "0: I2C3 clock disabled"]
    Disabled = 0,
    #[doc = "1: I2C3 clock enabled"]
    Enabled = 1,
}
impl From<I2C3EN_A> for bool {
    #[inline(always)]
    fn from(variant: I2C3EN_A) -> Self {
        variant as u8 != 0
    }
}
#[doc = "Field `I2C3EN` reader - I2C3 clock enable"]
pub type I2C3EN_R = crate::BitReader<I2C3EN_A>;
impl I2C3EN_R {
    #[doc = "Get enumerated values variant"]
    #[inline(always)]
    pub fn variant(&self) -> I2C3EN_A {
        match self.bits {
            false => I2C3EN_A::Disabled,
            true => I2C3EN_A::Enabled,
        }
    }
    #[doc = "Checks if the value of the field is `Disabled`"]
    #[inline(always)]
    pub fn is_disabled(&self) -> bool {
        *self == I2C3EN_A::Disabled
    }
    #[doc = "Checks if the value of the field is `Enabled`"]
    #[inline(always)]
    pub fn is_enabled(&self) -> bool {
        *self == I2C3EN_A::Enabled
    }
}
#[doc = "Field `I2C3EN` writer - I2C3 clock enable"]
pub type I2C3EN_W<'a, const O: u8> = crate::BitWriter<'a, u32, APB1ENR1_SPEC, I2C3EN_A, O>;
impl<'a, const O: u8> I2C3EN_W<'a, O> {
    #[doc = "I2C3 clock disabled"]
    #[inline(always)]
    pub fn disabled(self) -> &'a mut W {
        self.variant(I2C3EN_A::Disabled)
    }
    #[doc = "I2C3 clock enabled"]
    #[inline(always)]
    pub fn enabled(self) -> &'a mut W {
        self.variant(I2C3EN_A::Enabled)
    }
}
#[doc = "I2C1 clock enable\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq)]
pub enum I2C1EN_A {
    #[doc = "0: I2C1 clock disabled"]
    Disabled = 0,
    #[doc = "1: I2C1 clock enabled"]
    Enabled = 1,
}
impl From<I2C1EN_A> for bool {
    #[inline(always)]
    fn from(variant: I2C1EN_A) -> Self {
        variant as u8 != 0
    }
}
#[doc = "Field `I2C1EN` reader - I2C1 clock enable"]
pub type I2C1EN_R = crate::BitReader<I2C1EN_A>;
impl I2C1EN_R {
    #[doc = "Get enumerated values variant"]
    #[inline(always)]
    pub fn variant(&self) -> I2C1EN_A {
        match self.bits {
            false => I2C1EN_A::Disabled,
            true => I2C1EN_A::Enabled,
        }
    }
    #[doc = "Checks if the value of the field is `Disabled`"]
    #[inline(always)]
    pub fn is_disabled(&self) -> bool {
        *self == I2C1EN_A::Disabled
    }
    #[doc = "Checks if the value of the field is `Enabled`"]
    #[inline(always)]
    pub fn is_enabled(&self) -> bool {
        *self == I2C1EN_A::Enabled
    }
}
#[doc = "Field `I2C1EN` writer - I2C1 clock enable"]
pub type I2C1EN_W<'a, const O: u8> = crate::BitWriter<'a, u32, APB1ENR1_SPEC, I2C1EN_A, O>;
impl<'a, const O: u8> I2C1EN_W<'a, O> {
    #[doc = "I2C1 clock disabled"]
    #[inline(always)]
    pub fn disabled(self) -> &'a mut W {
        self.variant(I2C1EN_A::Disabled)
    }
    #[doc = "I2C1 clock enabled"]
    #[inline(always)]
    pub fn enabled(self) -> &'a mut W {
        self.variant(I2C1EN_A::Enabled)
    }
}
#[doc = "USART3 clock enable\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq)]
pub enum USART3EN_A {
    #[doc = "0: USART3 clock disabled"]
    Disabled = 0,
    #[doc = "1: USART3 clock enabled"]
    Enabled = 1,
}
impl From<USART3EN_A> for bool {
    #[inline(always)]
    fn from(variant: USART3EN_A) -> Self {
        variant as u8 != 0
    }
}
#[doc = "Field `USART3EN` reader - USART3 clock enable"]
pub type USART3EN_R = crate::BitReader<USART3EN_A>;
impl USART3EN_R {
    #[doc = "Get enumerated values variant"]
    #[inline(always)]
    pub fn variant(&self) -> USART3EN_A {
        match self.bits {
            false => USART3EN_A::Disabled,
            true => USART3EN_A::Enabled,
        }
    }
    #[doc = "Checks if the value of the field is `Disabled`"]
    #[inline(always)]
    pub fn is_disabled(&self) -> bool {
        *self == USART3EN_A::Disabled
    }
    #[doc = "Checks if the value of the field is `Enabled`"]
    #[inline(always)]
    pub fn is_enabled(&self) -> bool {
        *self == USART3EN_A::Enabled
    }
}
#[doc = "Field `USART3EN` writer - USART3 clock enable"]
pub type USART3EN_W<'a, const O: u8> = crate::BitWriter<'a, u32, APB1ENR1_SPEC, USART3EN_A, O>;
impl<'a, const O: u8> USART3EN_W<'a, O> {
    #[doc = "USART3 clock disabled"]
    #[inline(always)]
    pub fn disabled(self) -> &'a mut W {
        self.variant(USART3EN_A::Disabled)
    }
    #[doc = "USART3 clock enabled"]
    #[inline(always)]
    pub fn enabled(self) -> &'a mut W {
        self.variant(USART3EN_A::Enabled)
    }
}
#[doc = "USART2 clock enable\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq)]
pub enum USART2EN_A {
    #[doc = "0: USART2 clock disabled"]
    Disabled = 0,
    #[doc = "1: USART2 clock enabled"]
    Enabled = 1,
}
impl From<USART2EN_A> for bool {
    #[inline(always)]
    fn from(variant: USART2EN_A) -> Self {
        variant as u8 != 0
    }
}
#[doc = "Field `USART2EN` reader - USART2 clock enable"]
pub type USART2EN_R = crate::BitReader<USART2EN_A>;
impl USART2EN_R {
    #[doc = "Get enumerated values variant"]
    #[inline(always)]
    pub fn variant(&self) -> USART2EN_A {
        match self.bits {
            false => USART2EN_A::Disabled,
            true => USART2EN_A::Enabled,
        }
    }
    #[doc = "Checks if the value of the field is `Disabled`"]
    #[inline(always)]
    pub fn is_disabled(&self) -> bool {
        *self == USART2EN_A::Disabled
    }
    #[doc = "Checks if the value of the field is `Enabled`"]
    #[inline(always)]
    pub fn is_enabled(&self) -> bool {
        *self == USART2EN_A::Enabled
    }
}
#[doc = "Field `USART2EN` writer - USART2 clock enable"]
pub type USART2EN_W<'a, const O: u8> = crate::BitWriter<'a, u32, APB1ENR1_SPEC, USART2EN_A, O>;
impl<'a, const O: u8> USART2EN_W<'a, O> {
    #[doc = "USART2 clock disabled"]
    #[inline(always)]
    pub fn disabled(self) -> &'a mut W {
        self.variant(USART2EN_A::Disabled)
    }
    #[doc = "USART2 clock enabled"]
    #[inline(always)]
    pub fn enabled(self) -> &'a mut W {
        self.variant(USART2EN_A::Enabled)
    }
}
#[doc = "Field `SPI3EN` reader - SPI3 clock enable"]
pub type SPI3EN_R = crate::BitReader<bool>;
#[doc = "Field `SPI3EN` writer - SPI3 clock enable"]
pub type SPI3EN_W<'a, const O: u8> = crate::BitWriter<'a, u32, APB1ENR1_SPEC, bool, O>;
#[doc = "Field `SPI2EN` reader - SPI peripheral 2 clock enable"]
pub type SPI2EN_R = crate::BitReader<bool>;
#[doc = "Field `SPI2EN` writer - SPI peripheral 2 clock enable"]
pub type SPI2EN_W<'a, const O: u8> = crate::BitWriter<'a, u32, APB1ENR1_SPEC, bool, O>;
#[doc = "Field `WWDGEN` reader - Window watchdog clock enable"]
pub type WWDGEN_R = crate::BitReader<bool>;
#[doc = "Field `WWDGEN` writer - Window watchdog clock enable"]
pub type WWDGEN_W<'a, const O: u8> = crate::BitWriter<'a, u32, APB1ENR1_SPEC, bool, O>;
#[doc = "Field `LCDEN` reader - LCD clock enable"]
pub type LCDEN_R = crate::BitReader<bool>;
#[doc = "Field `LCDEN` writer - LCD clock enable"]
pub type LCDEN_W<'a, const O: u8> = crate::BitWriter<'a, u32, APB1ENR1_SPEC, bool, O>;
#[doc = "Field `TIM7EN` reader - TIM7 timer clock enable"]
pub type TIM7EN_R = crate::BitReader<bool>;
#[doc = "Field `TIM7EN` writer - TIM7 timer clock enable"]
pub type TIM7EN_W<'a, const O: u8> = crate::BitWriter<'a, u32, APB1ENR1_SPEC, bool, O>;
#[doc = "Field `TIM6EN` reader - TIM6 timer clock enable"]
pub type TIM6EN_R = crate::BitReader<bool>;
#[doc = "Field `TIM6EN` writer - TIM6 timer clock enable"]
pub type TIM6EN_W<'a, const O: u8> = crate::BitWriter<'a, u32, APB1ENR1_SPEC, bool, O>;
#[doc = "Field `TIM2EN` reader - TIM2 timer clock enable"]
pub type TIM2EN_R = crate::BitReader<bool>;
#[doc = "Field `TIM2EN` writer - TIM2 timer clock enable"]
pub type TIM2EN_W<'a, const O: u8> = crate::BitWriter<'a, u32, APB1ENR1_SPEC, bool, O>;
#[doc = "Field `RTCAPBEN` reader - RTC APB clock enable"]
pub type RTCAPBEN_R = crate::BitReader<bool>;
#[doc = "Field `RTCAPBEN` writer - RTC APB clock enable"]
pub type RTCAPBEN_W<'a, const O: u8> = crate::BitWriter<'a, u32, APB1ENR1_SPEC, bool, O>;
#[doc = "Field `CRSEN` reader - CRS clock enable"]
pub type CRSEN_R = crate::BitReader<bool>;
#[doc = "Field `CRSEN` writer - CRS clock enable"]
pub type CRSEN_W<'a, const O: u8> = crate::BitWriter<'a, u32, APB1ENR1_SPEC, bool, O>;
#[doc = "Field `USBF` reader - USB FS clock enable"]
pub type USBF_R = crate::BitReader<bool>;
#[doc = "Field `USBF` writer - USB FS clock enable"]
pub type USBF_W<'a, const O: u8> = crate::BitWriter<'a, u32, APB1ENR1_SPEC, bool, O>;
#[doc = "Field `TIM3EN` reader - TIM3 timer clock enable"]
pub type TIM3EN_R = crate::BitReader<bool>;
#[doc = "Field `TIM3EN` writer - TIM3 timer clock enable"]
pub type TIM3EN_W<'a, const O: u8> = crate::BitWriter<'a, u32, APB1ENR1_SPEC, bool, O>;
#[doc = "UART4 clock enable\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq)]
pub enum UART4EN_A {
    #[doc = "0: UART4 clock disabled"]
    Disabled = 0,
    #[doc = "1: UART4 clock enabled"]
    Enabled = 1,
}
impl From<UART4EN_A> for bool {
    #[inline(always)]
    fn from(variant: UART4EN_A) -> Self {
        variant as u8 != 0
    }
}
#[doc = "Field `UART4EN` reader - UART4 clock enable"]
pub type UART4EN_R = crate::BitReader<UART4EN_A>;
impl UART4EN_R {
    #[doc = "Get enumerated values variant"]
    #[inline(always)]
    pub fn variant(&self) -> UART4EN_A {
        match self.bits {
            false => UART4EN_A::Disabled,
            true => UART4EN_A::Enabled,
        }
    }
    #[doc = "Checks if the value of the field is `Disabled`"]
    #[inline(always)]
    pub fn is_disabled(&self) -> bool {
        *self == UART4EN_A::Disabled
    }
    #[doc = "Checks if the value of the field is `Enabled`"]
    #[inline(always)]
    pub fn is_enabled(&self) -> bool {
        *self == UART4EN_A::Enabled
    }
}
#[doc = "Field `UART4EN` writer - UART4 clock enable"]
pub type UART4EN_W<'a, const O: u8> = crate::BitWriter<'a, u32, APB1ENR1_SPEC, UART4EN_A, O>;
impl<'a, const O: u8> UART4EN_W<'a, O> {
    #[doc = "UART4 clock disabled"]
    #[inline(always)]
    pub fn disabled(self) -> &'a mut W {
        self.variant(UART4EN_A::Disabled)
    }
    #[doc = "UART4 clock enabled"]
    #[inline(always)]
    pub fn enabled(self) -> &'a mut W {
        self.variant(UART4EN_A::Enabled)
    }
}
#[doc = "I2C2 clock enable\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq)]
pub enum I2C2EN_A {
    #[doc = "0: I2C2 clock disabled"]
    Disabled = 0,
    #[doc = "1: I2C2 clock enabled"]
    Enabled = 1,
}
impl From<I2C2EN_A> for bool {
    #[inline(always)]
    fn from(variant: I2C2EN_A) -> Self {
        variant as u8 != 0
    }
}
#[doc = "Field `I2C2EN` reader - I2C2 clock enable"]
pub type I2C2EN_R = crate::BitReader<I2C2EN_A>;
impl I2C2EN_R {
    #[doc = "Get enumerated values variant"]
    #[inline(always)]
    pub fn variant(&self) -> I2C2EN_A {
        match self.bits {
            false => I2C2EN_A::Disabled,
            true => I2C2EN_A::Enabled,
        }
    }
    #[doc = "Checks if the value of the field is `Disabled`"]
    #[inline(always)]
    pub fn is_disabled(&self) -> bool {
        *self == I2C2EN_A::Disabled
    }
    #[doc = "Checks if the value of the field is `Enabled`"]
    #[inline(always)]
    pub fn is_enabled(&self) -> bool {
        *self == I2C2EN_A::Enabled
    }
}
#[doc = "Field `I2C2EN` writer - I2C2 clock enable"]
pub type I2C2EN_W<'a, const O: u8> = crate::BitWriter<'a, u32, APB1ENR1_SPEC, I2C2EN_A, O>;
impl<'a, const O: u8> I2C2EN_W<'a, O> {
    #[doc = "I2C2 clock disabled"]
    #[inline(always)]
    pub fn disabled(self) -> &'a mut W {
        self.variant(I2C2EN_A::Disabled)
    }
    #[doc = "I2C2 clock enabled"]
    #[inline(always)]
    pub fn enabled(self) -> &'a mut W {
        self.variant(I2C2EN_A::Enabled)
    }
}
impl R {
    #[doc = "Bit 31 - Low power timer 1 clock enable"]
    #[inline(always)]
    pub fn lptim1en(&self) -> LPTIM1EN_R {
        LPTIM1EN_R::new(((self.bits >> 31) & 1) != 0)
    }
    #[doc = "Bit 30 - OPAMP interface clock enable"]
    #[inline(always)]
    pub fn opampen(&self) -> OPAMPEN_R {
        OPAMPEN_R::new(((self.bits >> 30) & 1) != 0)
    }
    #[doc = "Bit 29 - DAC1 interface clock enable"]
    #[inline(always)]
    pub fn dac1en(&self) -> DAC1EN_R {
        DAC1EN_R::new(((self.bits >> 29) & 1) != 0)
    }
    #[doc = "Bit 28 - Power interface clock enable"]
    #[inline(always)]
    pub fn pwren(&self) -> PWREN_R {
        PWREN_R::new(((self.bits >> 28) & 1) != 0)
    }
    #[doc = "Bit 25 - CAN1 clock enable"]
    #[inline(always)]
    pub fn can1en(&self) -> CAN1EN_R {
        CAN1EN_R::new(((self.bits >> 25) & 1) != 0)
    }
    #[doc = "Bit 23 - I2C3 clock enable"]
    #[inline(always)]
    pub fn i2c3en(&self) -> I2C3EN_R {
        I2C3EN_R::new(((self.bits >> 23) & 1) != 0)
    }
    #[doc = "Bit 21 - I2C1 clock enable"]
    #[inline(always)]
    pub fn i2c1en(&self) -> I2C1EN_R {
        I2C1EN_R::new(((self.bits >> 21) & 1) != 0)
    }
    #[doc = "Bit 18 - USART3 clock enable"]
    #[inline(always)]
    pub fn usart3en(&self) -> USART3EN_R {
        USART3EN_R::new(((self.bits >> 18) & 1) != 0)
    }
    #[doc = "Bit 17 - USART2 clock enable"]
    #[inline(always)]
    pub fn usart2en(&self) -> USART2EN_R {
        USART2EN_R::new(((self.bits >> 17) & 1) != 0)
    }
    #[doc = "Bit 15 - SPI3 clock enable"]
    #[inline(always)]
    pub fn spi3en(&self) -> SPI3EN_R {
        SPI3EN_R::new(((self.bits >> 15) & 1) != 0)
    }
    #[doc = "Bit 14 - SPI peripheral 2 clock enable"]
    #[inline(always)]
    pub fn spi2en(&self) -> SPI2EN_R {
        SPI2EN_R::new(((self.bits >> 14) & 1) != 0)
    }
    #[doc = "Bit 11 - Window watchdog clock enable"]
    #[inline(always)]
    pub fn wwdgen(&self) -> WWDGEN_R {
        WWDGEN_R::new(((self.bits >> 11) & 1) != 0)
    }
    #[doc = "Bit 9 - LCD clock enable"]
    #[inline(always)]
    pub fn lcden(&self) -> LCDEN_R {
        LCDEN_R::new(((self.bits >> 9) & 1) != 0)
    }
    #[doc = "Bit 5 - TIM7 timer clock enable"]
    #[inline(always)]
    pub fn tim7en(&self) -> TIM7EN_R {
        TIM7EN_R::new(((self.bits >> 5) & 1) != 0)
    }
    #[doc = "Bit 4 - TIM6 timer clock enable"]
    #[inline(always)]
    pub fn tim6en(&self) -> TIM6EN_R {
        TIM6EN_R::new(((self.bits >> 4) & 1) != 0)
    }
    #[doc = "Bit 0 - TIM2 timer clock enable"]
    #[inline(always)]
    pub fn tim2en(&self) -> TIM2EN_R {
        TIM2EN_R::new((self.bits & 1) != 0)
    }
    #[doc = "Bit 10 - RTC APB clock enable"]
    #[inline(always)]
    pub fn rtcapben(&self) -> RTCAPBEN_R {
        RTCAPBEN_R::new(((self.bits >> 10) & 1) != 0)
    }
    #[doc = "Bit 24 - CRS clock enable"]
    #[inline(always)]
    pub fn crsen(&self) -> CRSEN_R {
        CRSEN_R::new(((self.bits >> 24) & 1) != 0)
    }
    #[doc = "Bit 26 - USB FS clock enable"]
    #[inline(always)]
    pub fn usbf(&self) -> USBF_R {
        USBF_R::new(((self.bits >> 26) & 1) != 0)
    }
    #[doc = "Bit 1 - TIM3 timer clock enable"]
    #[inline(always)]
    pub fn tim3en(&self) -> TIM3EN_R {
        TIM3EN_R::new(((self.bits >> 1) & 1) != 0)
    }
    #[doc = "Bit 19 - UART4 clock enable"]
    #[inline(always)]
    pub fn uart4en(&self) -> UART4EN_R {
        UART4EN_R::new(((self.bits >> 19) & 1) != 0)
    }
    #[doc = "Bit 22 - I2C2 clock enable"]
    #[inline(always)]
    pub fn i2c2en(&self) -> I2C2EN_R {
        I2C2EN_R::new(((self.bits >> 22) & 1) != 0)
    }
}
impl W {
    #[doc = "Bit 31 - Low power timer 1 clock enable"]
    #[inline(always)]
    pub fn lptim1en(&mut self) -> LPTIM1EN_W<31> {
        LPTIM1EN_W::new(self)
    }
    #[doc = "Bit 30 - OPAMP interface clock enable"]
    #[inline(always)]
    pub fn opampen(&mut self) -> OPAMPEN_W<30> {
        OPAMPEN_W::new(self)
    }
    #[doc = "Bit 29 - DAC1 interface clock enable"]
    #[inline(always)]
    pub fn dac1en(&mut self) -> DAC1EN_W<29> {
        DAC1EN_W::new(self)
    }
    #[doc = "Bit 28 - Power interface clock enable"]
    #[inline(always)]
    pub fn pwren(&mut self) -> PWREN_W<28> {
        PWREN_W::new(self)
    }
    #[doc = "Bit 25 - CAN1 clock enable"]
    #[inline(always)]
    pub fn can1en(&mut self) -> CAN1EN_W<25> {
        CAN1EN_W::new(self)
    }
    #[doc = "Bit 23 - I2C3 clock enable"]
    #[inline(always)]
    pub fn i2c3en(&mut self) -> I2C3EN_W<23> {
        I2C3EN_W::new(self)
    }
    #[doc = "Bit 21 - I2C1 clock enable"]
    #[inline(always)]
    pub fn i2c1en(&mut self) -> I2C1EN_W<21> {
        I2C1EN_W::new(self)
    }
    #[doc = "Bit 18 - USART3 clock enable"]
    #[inline(always)]
    pub fn usart3en(&mut self) -> USART3EN_W<18> {
        USART3EN_W::new(self)
    }
    #[doc = "Bit 17 - USART2 clock enable"]
    #[inline(always)]
    pub fn usart2en(&mut self) -> USART2EN_W<17> {
        USART2EN_W::new(self)
    }
    #[doc = "Bit 15 - SPI3 clock enable"]
    #[inline(always)]
    pub fn spi3en(&mut self) -> SPI3EN_W<15> {
        SPI3EN_W::new(self)
    }
    #[doc = "Bit 14 - SPI peripheral 2 clock enable"]
    #[inline(always)]
    pub fn spi2en(&mut self) -> SPI2EN_W<14> {
        SPI2EN_W::new(self)
    }
    #[doc = "Bit 11 - Window watchdog clock enable"]
    #[inline(always)]
    pub fn wwdgen(&mut self) -> WWDGEN_W<11> {
        WWDGEN_W::new(self)
    }
    #[doc = "Bit 9 - LCD clock enable"]
    #[inline(always)]
    pub fn lcden(&mut self) -> LCDEN_W<9> {
        LCDEN_W::new(self)
    }
    #[doc = "Bit 5 - TIM7 timer clock enable"]
    #[inline(always)]
    pub fn tim7en(&mut self) -> TIM7EN_W<5> {
        TIM7EN_W::new(self)
    }
    #[doc = "Bit 4 - TIM6 timer clock enable"]
    #[inline(always)]
    pub fn tim6en(&mut self) -> TIM6EN_W<4> {
        TIM6EN_W::new(self)
    }
    #[doc = "Bit 0 - TIM2 timer clock enable"]
    #[inline(always)]
    pub fn tim2en(&mut self) -> TIM2EN_W<0> {
        TIM2EN_W::new(self)
    }
    #[doc = "Bit 10 - RTC APB clock enable"]
    #[inline(always)]
    pub fn rtcapben(&mut self) -> RTCAPBEN_W<10> {
        RTCAPBEN_W::new(self)
    }
    #[doc = "Bit 24 - CRS clock enable"]
    #[inline(always)]
    pub fn crsen(&mut self) -> CRSEN_W<24> {
        CRSEN_W::new(self)
    }
    #[doc = "Bit 26 - USB FS clock enable"]
    #[inline(always)]
    pub fn usbf(&mut self) -> USBF_W<26> {
        USBF_W::new(self)
    }
    #[doc = "Bit 1 - TIM3 timer clock enable"]
    #[inline(always)]
    pub fn tim3en(&mut self) -> TIM3EN_W<1> {
        TIM3EN_W::new(self)
    }
    #[doc = "Bit 19 - UART4 clock enable"]
    #[inline(always)]
    pub fn uart4en(&mut self) -> UART4EN_W<19> {
        UART4EN_W::new(self)
    }
    #[doc = "Bit 22 - I2C2 clock enable"]
    #[inline(always)]
    pub fn i2c2en(&mut self) -> I2C2EN_W<22> {
        I2C2EN_W::new(self)
    }
    #[doc = "Writes raw bits to the register."]
    #[inline(always)]
    pub unsafe fn bits(&mut self, bits: u32) -> &mut Self {
        self.0.bits(bits);
        self
    }
}
#[doc = "APB1ENR1\n\nThis register you can [`read`](crate::generic::Reg::read), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [apb1enr1](index.html) module"]
pub struct APB1ENR1_SPEC;
impl crate::RegisterSpec for APB1ENR1_SPEC {
    type Ux = u32;
}
#[doc = "`read()` method returns [apb1enr1::R](R) reader structure"]
impl crate::Readable for APB1ENR1_SPEC {
    type Reader = R;
}
#[doc = "`write(|w| ..)` method takes [apb1enr1::W](W) writer structure"]
impl crate::Writable for APB1ENR1_SPEC {
    type Writer = W;
}
#[doc = "`reset()` method sets APB1ENR1 to value 0"]
impl crate::Resettable for APB1ENR1_SPEC {
    #[inline(always)]
    fn reset_value() -> Self::Ux {
        0
    }
}