Struct stm32l0xx_hal::gpio::gpioa::PA8 [−][src]
Pin
Implementations
impl<MODE> PA8<MODE>
[src]
pub const PORT: Port
[src]
The port this pin is part of.
pub const PIN_NUMBER: u8
[src]
The pin’s number inside its port.
pub fn port(&self) -> Port
[src]
Returns the port this pin is part of.
pub fn pin_number(&self) -> u8
[src]
Returns this pin’s number inside its port.
impl<MODE: PinMode> PA8<MODE>
[src]
pub fn into_floating_input(self) -> PA8<Input<Floating>>
[src]
Configures the pin to operate as a floating input pin.
pub fn with_floating_input<R>(
&mut self,
f: impl FnOnce(&mut PA8<Input<Floating>>) -> R
) -> R
[src]
&mut self,
f: impl FnOnce(&mut PA8<Input<Floating>>) -> R
) -> R
Temporarily configures this pin as a floating input.
The closure f
is called with the reconfigured pin. After it returns,
the pin will be configured back.
pub fn into_pull_down_input(self) -> PA8<Input<PullDown>>
[src]
Configures the pin to operate as a pulled-down input pin.
pub fn with_pull_down_input<R>(
&mut self,
f: impl FnOnce(&mut PA8<Input<PullDown>>) -> R
) -> R
[src]
&mut self,
f: impl FnOnce(&mut PA8<Input<PullDown>>) -> R
) -> R
Temporarily configures this pin as a pulled-down input.
The closure f
is called with the reconfigured pin. After it returns,
the pin will be configured back.
pub fn into_pull_up_input(self) -> PA8<Input<PullUp>>
[src]
Configures the pin to operate as a pulled-up input pin.
pub fn with_pull_up_input<R>(
&mut self,
f: impl FnOnce(&mut PA8<Input<PullUp>>) -> R
) -> R
[src]
&mut self,
f: impl FnOnce(&mut PA8<Input<PullUp>>) -> R
) -> R
Temporarily configures this pin as a pulled-up input.
The closure f
is called with the reconfigured pin. After it returns,
the pin will be configured back.
pub fn into_analog(self) -> PA8<Analog>
[src]
Configures the pin to operate as an analog pin.
pub fn with_analog<R>(&mut self, f: impl FnOnce(&mut PA8<Analog>) -> R) -> R
[src]
Temporarily configures this pin as an analog pin.
The closure f
is called with the reconfigured pin. After it returns,
the pin will be configured back.
pub fn into_open_drain_output(self) -> PA8<Output<OpenDrain>>
[src]
Configures the pin to operate as an open drain output pin.
pub fn with_open_drain_output<R>(
&mut self,
f: impl FnOnce(&mut PA8<Output<OpenDrain>>) -> R
) -> R
[src]
&mut self,
f: impl FnOnce(&mut PA8<Output<OpenDrain>>) -> R
) -> R
Temporarily configures this pin as an open drain output.
The closure f
is called with the reconfigured pin. After it returns,
the pin will be configured back.
pub fn into_push_pull_output(self) -> PA8<Output<PushPull>>
[src]
Configures the pin to operate as an push-pull output pin.
pub fn with_push_pull_output<R>(
&mut self,
f: impl FnOnce(&mut PA8<Output<PushPull>>) -> R
) -> R
[src]
&mut self,
f: impl FnOnce(&mut PA8<Output<PushPull>>) -> R
) -> R
Temporarily configures this pin as a push-pull output.
The closure f
is called with the reconfigured pin. After it returns,
the pin will be configured back.
pub fn set_speed(self, speed: Speed) -> Self
[src]
Set pin speed.
impl<MODE> PA8<Output<MODE>>
[src]
pub fn downgrade(self) -> PA<Output<MODE>>
[src]
Erases the pin number from the type
This is useful when you want to collect the pins into an array where you need all the elements to have the same type
impl<MODE> PA8<Input<MODE>>
[src]
pub fn downgrade(self) -> PA<Input<MODE>>
[src]
Erases the pin number from the type
This is useful when you want to collect the pins into an array where you need all the elements to have the same type
Trait Implementations
impl<MODE> Default for PA8<Output<MODE>>
[src]
impl<MODE> InputPin for PA8<Output<MODE>>
[src]
type Error = Void
Error type
fn is_high(&self) -> Result<bool, Self::Error>
[src]
fn is_low(&self) -> Result<bool, Self::Error>
[src]
impl<MODE> InputPin for PA8<Input<MODE>>
[src]
type Error = Void
Error type
fn is_high(&self) -> Result<bool, Self::Error>
[src]
fn is_low(&self) -> Result<bool, Self::Error>
[src]
impl<MODE> OutputPin for PA8<Output<MODE>>
[src]
type Error = Void
Error type
fn set_high(&mut self) -> Result<(), Self::Error>
[src]
fn set_low(&mut self) -> Result<(), Self::Error>
[src]
impl Pin for PA8<Analog>
[src]
impl<MODE> StatefulOutputPin for PA8<Output<MODE>>
[src]
fn is_set_high(&self) -> Result<bool, Self::Error>
[src]
fn is_set_low(&self) -> Result<bool, Self::Error>
[src]
Auto Trait Implementations
impl<MODE> Send for PA8<MODE> where
MODE: Send,
MODE: Send,
impl<MODE> Sync for PA8<MODE> where
MODE: Sync,
MODE: Sync,
impl<MODE> Unpin for PA8<MODE> where
MODE: Unpin,
MODE: Unpin,
Blanket Implementations
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,
impl<T> Borrow<T> for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
[src]
T: ?Sized,
pub fn borrow_mut(&mut self) -> &mut T
[src]
impl<T> From<T> for T
[src]
impl<T, U> Into<U> for T where
U: From<T>,
[src]
U: From<T>,
impl<T> Same<T> for T
type Output = T
Should always be Self
impl<P> ToggleableOutputPin for P where
P: Default,
[src]
P: Default,
type Error = <P as OutputPin>::Error
Error type
pub fn toggle(&mut self) -> Result<(), <P as ToggleableOutputPin>::Error>
[src]
Toggle pin output
impl<T, U> TryFrom<U> for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
pub fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T, U> TryInto<U> for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,