#[doc = "Register `CCMR3_Output` reader"]
pub struct R(crate::R<CCMR3_OUTPUT_SPEC>);
impl core::ops::Deref for R {
    type Target = crate::R<CCMR3_OUTPUT_SPEC>;
    #[inline(always)]
    fn deref(&self) -> &Self::Target {
        &self.0
    }
}
impl From<crate::R<CCMR3_OUTPUT_SPEC>> for R {
    #[inline(always)]
    fn from(reader: crate::R<CCMR3_OUTPUT_SPEC>) -> Self {
        R(reader)
    }
}
#[doc = "Register `CCMR3_Output` writer"]
pub struct W(crate::W<CCMR3_OUTPUT_SPEC>);
impl core::ops::Deref for W {
    type Target = crate::W<CCMR3_OUTPUT_SPEC>;
    #[inline(always)]
    fn deref(&self) -> &Self::Target {
        &self.0
    }
}
impl core::ops::DerefMut for W {
    #[inline(always)]
    fn deref_mut(&mut self) -> &mut Self::Target {
        &mut self.0
    }
}
impl From<crate::W<CCMR3_OUTPUT_SPEC>> for W {
    #[inline(always)]
    fn from(writer: crate::W<CCMR3_OUTPUT_SPEC>) -> Self {
        W(writer)
    }
}
#[doc = "Field `OC5FE` reader - Output compare 5 fast enable"]
pub type OC5FE_R = crate::BitReader<bool>;
#[doc = "Field `OC5FE` writer - Output compare 5 fast enable"]
pub type OC5FE_W<'a, const O: u8> = crate::BitWriter<'a, u32, CCMR3_OUTPUT_SPEC, bool, O>;
#[doc = "Field `OC5PE` reader - Output compare 5 preload enable"]
pub type OC5PE_R = crate::BitReader<bool>;
#[doc = "Field `OC5PE` writer - Output compare 5 preload enable"]
pub type OC5PE_W<'a, const O: u8> = crate::BitWriter<'a, u32, CCMR3_OUTPUT_SPEC, bool, O>;
#[doc = "Output compare 5 mode\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq)]
#[repr(u8)]
pub enum OC5M_A {
    #[doc = "0: The comparison between the output compare register TIMx_CCRy and the counter TIMx_CNT has no effect on the outputs / OpmMode1: Retriggerable OPM mode 1 - In up-counting mode, the channel is active until a trigger event is detected (on TRGI signal). In down-counting mode, the channel is inactive"]
    Frozen = 0,
    #[doc = "1: Set channel to active level on match. OCyREF signal is forced high when the counter matches the capture/compare register / OpmMode2: Inversely to OpmMode1"]
    ActiveOnMatch = 1,
    #[doc = "2: Set channel to inactive level on match. OCyREF signal is forced low when the counter matches the capture/compare register / Reserved"]
    InactiveOnMatch = 2,
    #[doc = "3: OCyREF toggles when TIMx_CNT=TIMx_CCRy / Reserved"]
    Toggle = 3,
    #[doc = "4: OCyREF is forced low / CombinedPwmMode1: OCyREF has the same behavior as in PWM mode 1. OCyREFC is the logical OR between OC1REF and OC2REF"]
    ForceInactive = 4,
    #[doc = "5: OCyREF is forced high / CombinedPwmMode2: OCyREF has the same behavior as in PWM mode 2. OCyREFC is the logical AND between OC1REF and OC2REF"]
    ForceActive = 5,
    #[doc = "6: In upcounting, channel is active as long as TIMx_CNT<TIMx_CCRy else inactive. In downcounting, channel is inactive as long as TIMx_CNT>TIMx_CCRy else active / AsymmetricPwmMode1: OCyREF has the same behavior as in PWM mode 1. OCyREFC outputs OC1REF when the counter is counting up, OC2REF when it is counting down"]
    PwmMode1 = 6,
    #[doc = "7: Inversely to PwmMode1 / AsymmetricPwmMode2: Inversely to AsymmetricPwmMode1"]
    PwmMode2 = 7,
}
impl From<OC5M_A> for u8 {
    #[inline(always)]
    fn from(variant: OC5M_A) -> Self {
        variant as _
    }
}
#[doc = "Field `OC5M` reader - Output compare 5 mode"]
pub type OC5M_R = crate::FieldReader<u8, OC5M_A>;
impl OC5M_R {
    #[doc = "Get enumerated values variant"]
    #[inline(always)]
    pub fn variant(&self) -> OC5M_A {
        match self.bits {
            0 => OC5M_A::Frozen,
            1 => OC5M_A::ActiveOnMatch,
            2 => OC5M_A::InactiveOnMatch,
            3 => OC5M_A::Toggle,
            4 => OC5M_A::ForceInactive,
            5 => OC5M_A::ForceActive,
            6 => OC5M_A::PwmMode1,
            7 => OC5M_A::PwmMode2,
            _ => unreachable!(),
        }
    }
    #[doc = "Checks if the value of the field is `Frozen`"]
    #[inline(always)]
    pub fn is_frozen(&self) -> bool {
        *self == OC5M_A::Frozen
    }
    #[doc = "Checks if the value of the field is `ActiveOnMatch`"]
    #[inline(always)]
    pub fn is_active_on_match(&self) -> bool {
        *self == OC5M_A::ActiveOnMatch
    }
    #[doc = "Checks if the value of the field is `InactiveOnMatch`"]
    #[inline(always)]
    pub fn is_inactive_on_match(&self) -> bool {
        *self == OC5M_A::InactiveOnMatch
    }
    #[doc = "Checks if the value of the field is `Toggle`"]
    #[inline(always)]
    pub fn is_toggle(&self) -> bool {
        *self == OC5M_A::Toggle
    }
    #[doc = "Checks if the value of the field is `ForceInactive`"]
    #[inline(always)]
    pub fn is_force_inactive(&self) -> bool {
        *self == OC5M_A::ForceInactive
    }
    #[doc = "Checks if the value of the field is `ForceActive`"]
    #[inline(always)]
    pub fn is_force_active(&self) -> bool {
        *self == OC5M_A::ForceActive
    }
    #[doc = "Checks if the value of the field is `PwmMode1`"]
    #[inline(always)]
    pub fn is_pwm_mode1(&self) -> bool {
        *self == OC5M_A::PwmMode1
    }
    #[doc = "Checks if the value of the field is `PwmMode2`"]
    #[inline(always)]
    pub fn is_pwm_mode2(&self) -> bool {
        *self == OC5M_A::PwmMode2
    }
}
#[doc = "Field `OC5M` writer - Output compare 5 mode"]
pub type OC5M_W<'a, const O: u8> =
    crate::FieldWriterSafe<'a, u32, CCMR3_OUTPUT_SPEC, u8, OC5M_A, 3, O>;
impl<'a, const O: u8> OC5M_W<'a, O> {
    #[doc = "The comparison between the output compare register TIMx_CCRy and the counter TIMx_CNT has no effect on the outputs / OpmMode1: Retriggerable OPM mode 1 - In up-counting mode, the channel is active until a trigger event is detected (on TRGI signal). In down-counting mode, the channel is inactive"]
    #[inline(always)]
    pub fn frozen(self) -> &'a mut W {
        self.variant(OC5M_A::Frozen)
    }
    #[doc = "Set channel to active level on match. OCyREF signal is forced high when the counter matches the capture/compare register / OpmMode2: Inversely to OpmMode1"]
    #[inline(always)]
    pub fn active_on_match(self) -> &'a mut W {
        self.variant(OC5M_A::ActiveOnMatch)
    }
    #[doc = "Set channel to inactive level on match. OCyREF signal is forced low when the counter matches the capture/compare register / Reserved"]
    #[inline(always)]
    pub fn inactive_on_match(self) -> &'a mut W {
        self.variant(OC5M_A::InactiveOnMatch)
    }
    #[doc = "OCyREF toggles when TIMx_CNT=TIMx_CCRy / Reserved"]
    #[inline(always)]
    pub fn toggle(self) -> &'a mut W {
        self.variant(OC5M_A::Toggle)
    }
    #[doc = "OCyREF is forced low / CombinedPwmMode1: OCyREF has the same behavior as in PWM mode 1. OCyREFC is the logical OR between OC1REF and OC2REF"]
    #[inline(always)]
    pub fn force_inactive(self) -> &'a mut W {
        self.variant(OC5M_A::ForceInactive)
    }
    #[doc = "OCyREF is forced high / CombinedPwmMode2: OCyREF has the same behavior as in PWM mode 2. OCyREFC is the logical AND between OC1REF and OC2REF"]
    #[inline(always)]
    pub fn force_active(self) -> &'a mut W {
        self.variant(OC5M_A::ForceActive)
    }
    #[doc = "In upcounting, channel is active as long as TIMx_CNT<TIMx_CCRy else inactive. In downcounting, channel is inactive as long as TIMx_CNT>TIMx_CCRy else active / AsymmetricPwmMode1: OCyREF has the same behavior as in PWM mode 1. OCyREFC outputs OC1REF when the counter is counting up, OC2REF when it is counting down"]
    #[inline(always)]
    pub fn pwm_mode1(self) -> &'a mut W {
        self.variant(OC5M_A::PwmMode1)
    }
    #[doc = "Inversely to PwmMode1 / AsymmetricPwmMode2: Inversely to AsymmetricPwmMode1"]
    #[inline(always)]
    pub fn pwm_mode2(self) -> &'a mut W {
        self.variant(OC5M_A::PwmMode2)
    }
}
#[doc = "Field `OC5CE` reader - Output compare 5 clear enable"]
pub type OC5CE_R = crate::BitReader<bool>;
#[doc = "Field `OC5CE` writer - Output compare 5 clear enable"]
pub type OC5CE_W<'a, const O: u8> = crate::BitWriter<'a, u32, CCMR3_OUTPUT_SPEC, bool, O>;
#[doc = "Field `OC6FE` reader - Output compare 6 fast enable"]
pub type OC6FE_R = crate::BitReader<bool>;
#[doc = "Field `OC6FE` writer - Output compare 6 fast enable"]
pub type OC6FE_W<'a, const O: u8> = crate::BitWriter<'a, u32, CCMR3_OUTPUT_SPEC, bool, O>;
#[doc = "Field `OC6PE` reader - Output compare 6 preload enable"]
pub type OC6PE_R = crate::BitReader<bool>;
#[doc = "Field `OC6PE` writer - Output compare 6 preload enable"]
pub type OC6PE_W<'a, const O: u8> = crate::BitWriter<'a, u32, CCMR3_OUTPUT_SPEC, bool, O>;
#[doc = "Output compare 6 mode"]
pub use OC5M_A as OC6M_A;
#[doc = "Field `OC6M` reader - Output compare 6 mode"]
pub use OC5M_R as OC6M_R;
#[doc = "Field `OC6M` writer - Output compare 6 mode"]
pub use OC5M_W as OC6M_W;
#[doc = "Field `OC6CE` reader - Output compare 6 clear enable"]
pub type OC6CE_R = crate::BitReader<bool>;
#[doc = "Field `OC6CE` writer - Output compare 6 clear enable"]
pub type OC6CE_W<'a, const O: u8> = crate::BitWriter<'a, u32, CCMR3_OUTPUT_SPEC, bool, O>;
#[doc = "Output Compare 5 mode\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq)]
pub enum OC5M_3_A {
    #[doc = "0: Normal output compare mode (modes 0-7)"]
    Normal = 0,
    #[doc = "1: Extended output compare mode (modes 7-15)"]
    Extended = 1,
}
impl From<OC5M_3_A> for bool {
    #[inline(always)]
    fn from(variant: OC5M_3_A) -> Self {
        variant as u8 != 0
    }
}
#[doc = "Field `OC5M_3` reader - Output Compare 5 mode"]
pub type OC5M_3_R = crate::BitReader<OC5M_3_A>;
impl OC5M_3_R {
    #[doc = "Get enumerated values variant"]
    #[inline(always)]
    pub fn variant(&self) -> OC5M_3_A {
        match self.bits {
            false => OC5M_3_A::Normal,
            true => OC5M_3_A::Extended,
        }
    }
    #[doc = "Checks if the value of the field is `Normal`"]
    #[inline(always)]
    pub fn is_normal(&self) -> bool {
        *self == OC5M_3_A::Normal
    }
    #[doc = "Checks if the value of the field is `Extended`"]
    #[inline(always)]
    pub fn is_extended(&self) -> bool {
        *self == OC5M_3_A::Extended
    }
}
#[doc = "Field `OC5M_3` writer - Output Compare 5 mode"]
pub type OC5M_3_W<'a, const O: u8> = crate::BitWriter<'a, u32, CCMR3_OUTPUT_SPEC, OC5M_3_A, O>;
impl<'a, const O: u8> OC5M_3_W<'a, O> {
    #[doc = "Normal output compare mode (modes 0-7)"]
    #[inline(always)]
    pub fn normal(self) -> &'a mut W {
        self.variant(OC5M_3_A::Normal)
    }
    #[doc = "Extended output compare mode (modes 7-15)"]
    #[inline(always)]
    pub fn extended(self) -> &'a mut W {
        self.variant(OC5M_3_A::Extended)
    }
}
#[doc = "Output Compare 6 mode"]
pub use OC5M_3_A as OC6M_3_A;
#[doc = "Field `OC6M_3` reader - Output Compare 6 mode"]
pub use OC5M_3_R as OC6M_3_R;
#[doc = "Field `OC6M_3` writer - Output Compare 6 mode"]
pub use OC5M_3_W as OC6M_3_W;
impl R {
    #[doc = "Bit 2 - Output compare 5 fast enable"]
    #[inline(always)]
    pub fn oc5fe(&self) -> OC5FE_R {
        OC5FE_R::new(((self.bits >> 2) & 1) != 0)
    }
    #[doc = "Bit 3 - Output compare 5 preload enable"]
    #[inline(always)]
    pub fn oc5pe(&self) -> OC5PE_R {
        OC5PE_R::new(((self.bits >> 3) & 1) != 0)
    }
    #[doc = "Bits 4:6 - Output compare 5 mode"]
    #[inline(always)]
    pub fn oc5m(&self) -> OC5M_R {
        OC5M_R::new(((self.bits >> 4) & 7) as u8)
    }
    #[doc = "Bit 7 - Output compare 5 clear enable"]
    #[inline(always)]
    pub fn oc5ce(&self) -> OC5CE_R {
        OC5CE_R::new(((self.bits >> 7) & 1) != 0)
    }
    #[doc = "Bit 10 - Output compare 6 fast enable"]
    #[inline(always)]
    pub fn oc6fe(&self) -> OC6FE_R {
        OC6FE_R::new(((self.bits >> 10) & 1) != 0)
    }
    #[doc = "Bit 11 - Output compare 6 preload enable"]
    #[inline(always)]
    pub fn oc6pe(&self) -> OC6PE_R {
        OC6PE_R::new(((self.bits >> 11) & 1) != 0)
    }
    #[doc = "Bits 12:14 - Output compare 6 mode"]
    #[inline(always)]
    pub fn oc6m(&self) -> OC6M_R {
        OC6M_R::new(((self.bits >> 12) & 7) as u8)
    }
    #[doc = "Bit 15 - Output compare 6 clear enable"]
    #[inline(always)]
    pub fn oc6ce(&self) -> OC6CE_R {
        OC6CE_R::new(((self.bits >> 15) & 1) != 0)
    }
    #[doc = "Bit 16 - Output Compare 5 mode"]
    #[inline(always)]
    pub fn oc5m_3(&self) -> OC5M_3_R {
        OC5M_3_R::new(((self.bits >> 16) & 1) != 0)
    }
    #[doc = "Bit 24 - Output Compare 6 mode"]
    #[inline(always)]
    pub fn oc6m_3(&self) -> OC6M_3_R {
        OC6M_3_R::new(((self.bits >> 24) & 1) != 0)
    }
}
impl W {
    #[doc = "Bit 2 - Output compare 5 fast enable"]
    #[inline(always)]
    pub fn oc5fe(&mut self) -> OC5FE_W<2> {
        OC5FE_W::new(self)
    }
    #[doc = "Bit 3 - Output compare 5 preload enable"]
    #[inline(always)]
    pub fn oc5pe(&mut self) -> OC5PE_W<3> {
        OC5PE_W::new(self)
    }
    #[doc = "Bits 4:6 - Output compare 5 mode"]
    #[inline(always)]
    pub fn oc5m(&mut self) -> OC5M_W<4> {
        OC5M_W::new(self)
    }
    #[doc = "Bit 7 - Output compare 5 clear enable"]
    #[inline(always)]
    pub fn oc5ce(&mut self) -> OC5CE_W<7> {
        OC5CE_W::new(self)
    }
    #[doc = "Bit 10 - Output compare 6 fast enable"]
    #[inline(always)]
    pub fn oc6fe(&mut self) -> OC6FE_W<10> {
        OC6FE_W::new(self)
    }
    #[doc = "Bit 11 - Output compare 6 preload enable"]
    #[inline(always)]
    pub fn oc6pe(&mut self) -> OC6PE_W<11> {
        OC6PE_W::new(self)
    }
    #[doc = "Bits 12:14 - Output compare 6 mode"]
    #[inline(always)]
    pub fn oc6m(&mut self) -> OC6M_W<12> {
        OC6M_W::new(self)
    }
    #[doc = "Bit 15 - Output compare 6 clear enable"]
    #[inline(always)]
    pub fn oc6ce(&mut self) -> OC6CE_W<15> {
        OC6CE_W::new(self)
    }
    #[doc = "Bit 16 - Output Compare 5 mode"]
    #[inline(always)]
    pub fn oc5m_3(&mut self) -> OC5M_3_W<16> {
        OC5M_3_W::new(self)
    }
    #[doc = "Bit 24 - Output Compare 6 mode"]
    #[inline(always)]
    pub fn oc6m_3(&mut self) -> OC6M_3_W<24> {
        OC6M_3_W::new(self)
    }
    #[doc = "Writes raw bits to the register."]
    #[inline(always)]
    pub unsafe fn bits(&mut self, bits: u32) -> &mut Self {
        self.0.bits(bits);
        self
    }
}
#[doc = "capture/compare mode register 3 (output mode)\n\nThis register you can [`read`](crate::generic::Reg::read), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [ccmr3_output](index.html) module"]
pub struct CCMR3_OUTPUT_SPEC;
impl crate::RegisterSpec for CCMR3_OUTPUT_SPEC {
    type Ux = u32;
}
#[doc = "`read()` method returns [ccmr3_output::R](R) reader structure"]
impl crate::Readable for CCMR3_OUTPUT_SPEC {
    type Reader = R;
}
#[doc = "`write(|w| ..)` method takes [ccmr3_output::W](W) writer structure"]
impl crate::Writable for CCMR3_OUTPUT_SPEC {
    type Writer = W;
}
#[doc = "`reset()` method sets CCMR3_Output to value 0"]
impl crate::Resettable for CCMR3_OUTPUT_SPEC {
    #[inline(always)]
    fn reset_value() -> Self::Ux {
        0
    }
}