#[doc = r"Value read from the register"]
pub struct R {
    bits: u32,
}
impl super::BSR {
    #[doc = r"Reads the contents of the register"]
    #[inline(always)]
    pub fn read(&self) -> R {
        R {
            bits: self.register.get(),
        }
    }
}
#[doc = r"Value of the field"]
pub struct OVRUDRR {
    bits: bool,
}
impl OVRUDRR {
    #[doc = r"Value of the field as raw bits"]
    #[inline(always)]
    pub fn bit(&self) -> bool {
        self.bits
    }
    #[doc = r"Returns `true` if the bit is clear (0)"]
    #[inline(always)]
    pub fn bit_is_clear(&self) -> bool {
        !self.bit()
    }
    #[doc = r"Returns `true` if the bit is set (1)"]
    #[inline(always)]
    pub fn bit_is_set(&self) -> bool {
        self.bit()
    }
}
#[doc = r"Value of the field"]
pub struct MUTEDETR {
    bits: bool,
}
impl MUTEDETR {
    #[doc = r"Value of the field as raw bits"]
    #[inline(always)]
    pub fn bit(&self) -> bool {
        self.bits
    }
    #[doc = r"Returns `true` if the bit is clear (0)"]
    #[inline(always)]
    pub fn bit_is_clear(&self) -> bool {
        !self.bit()
    }
    #[doc = r"Returns `true` if the bit is set (1)"]
    #[inline(always)]
    pub fn bit_is_set(&self) -> bool {
        self.bit()
    }
}
#[doc = r"Value of the field"]
pub struct WCKCFGR {
    bits: bool,
}
impl WCKCFGR {
    #[doc = r"Value of the field as raw bits"]
    #[inline(always)]
    pub fn bit(&self) -> bool {
        self.bits
    }
    #[doc = r"Returns `true` if the bit is clear (0)"]
    #[inline(always)]
    pub fn bit_is_clear(&self) -> bool {
        !self.bit()
    }
    #[doc = r"Returns `true` if the bit is set (1)"]
    #[inline(always)]
    pub fn bit_is_set(&self) -> bool {
        self.bit()
    }
}
#[doc = r"Value of the field"]
pub struct FREQR {
    bits: bool,
}
impl FREQR {
    #[doc = r"Value of the field as raw bits"]
    #[inline(always)]
    pub fn bit(&self) -> bool {
        self.bits
    }
    #[doc = r"Returns `true` if the bit is clear (0)"]
    #[inline(always)]
    pub fn bit_is_clear(&self) -> bool {
        !self.bit()
    }
    #[doc = r"Returns `true` if the bit is set (1)"]
    #[inline(always)]
    pub fn bit_is_set(&self) -> bool {
        self.bit()
    }
}
#[doc = r"Value of the field"]
pub struct CNRDYR {
    bits: bool,
}
impl CNRDYR {
    #[doc = r"Value of the field as raw bits"]
    #[inline(always)]
    pub fn bit(&self) -> bool {
        self.bits
    }
    #[doc = r"Returns `true` if the bit is clear (0)"]
    #[inline(always)]
    pub fn bit_is_clear(&self) -> bool {
        !self.bit()
    }
    #[doc = r"Returns `true` if the bit is set (1)"]
    #[inline(always)]
    pub fn bit_is_set(&self) -> bool {
        self.bit()
    }
}
#[doc = r"Value of the field"]
pub struct AFSDETR {
    bits: bool,
}
impl AFSDETR {
    #[doc = r"Value of the field as raw bits"]
    #[inline(always)]
    pub fn bit(&self) -> bool {
        self.bits
    }
    #[doc = r"Returns `true` if the bit is clear (0)"]
    #[inline(always)]
    pub fn bit_is_clear(&self) -> bool {
        !self.bit()
    }
    #[doc = r"Returns `true` if the bit is set (1)"]
    #[inline(always)]
    pub fn bit_is_set(&self) -> bool {
        self.bit()
    }
}
#[doc = r"Value of the field"]
pub struct LFSDETR {
    bits: bool,
}
impl LFSDETR {
    #[doc = r"Value of the field as raw bits"]
    #[inline(always)]
    pub fn bit(&self) -> bool {
        self.bits
    }
    #[doc = r"Returns `true` if the bit is clear (0)"]
    #[inline(always)]
    pub fn bit_is_clear(&self) -> bool {
        !self.bit()
    }
    #[doc = r"Returns `true` if the bit is set (1)"]
    #[inline(always)]
    pub fn bit_is_set(&self) -> bool {
        self.bit()
    }
}
#[doc = r"Value of the field"]
pub struct FLVLR {
    bits: u8,
}
impl FLVLR {
    #[doc = r"Value of the field as raw bits"]
    #[inline(always)]
    pub fn bits(&self) -> u8 {
        self.bits
    }
}
impl R {
    #[doc = r"Value of the register as raw bits"]
    #[inline(always)]
    pub fn bits(&self) -> u32 {
        self.bits
    }
    #[doc = "Bit 0 - Overrun / underrun. This bit is read only. The overrun and underrun conditions can occur only when the audio block is configured as a receiver and a transmitter, respectively. It can generate an interrupt if OVRUDRIE bit is set in SAI_xIM register. This flag is cleared when the software sets COVRUDR bit in SAI_xCLRFR register."]
    #[inline(always)]
    pub fn ovrudr(&self) -> OVRUDRR {
        let bits = ((self.bits >> 0) & 0x01) != 0;
        OVRUDRR { bits }
    }
    #[doc = "Bit 1 - Mute detection. This bit is read only. This flag is set if consecutive 0 values are received in each slot of a given audio frame and for a consecutive number of audio frames (set in the MUTECNT bit in the SAI_xCR2 register). It can generate an interrupt if MUTEDETIE bit is set in SAI_xIM register. This flag is cleared when the software sets bit CMUTEDET in the SAI_xCLRFR register."]
    #[inline(always)]
    pub fn mutedet(&self) -> MUTEDETR {
        let bits = ((self.bits >> 1) & 0x01) != 0;
        MUTEDETR { bits }
    }
    #[doc = "Bit 2 - Wrong clock configuration flag. This bit is read only. This bit is used only when the audio block operates in master mode (MODE\\[1\\] = 0) and NODIV = 0. It can generate an interrupt if WCKCFGIE bit is set in SAI_xIM register. This flag is cleared when the software sets CWCKCFG bit in SAI_xCLRFR register."]
    #[inline(always)]
    pub fn wckcfg(&self) -> WCKCFGR {
        let bits = ((self.bits >> 2) & 0x01) != 0;
        WCKCFGR { bits }
    }
    #[doc = "Bit 3 - FIFO request. This bit is read only. The request depends on the audio block configuration: If the block is configured in transmission mode, the FIFO request is related to a write request operation in the SAI_xDR. If the block configured in reception, the FIFO request related to a read request operation from the SAI_xDR. This flag can generate an interrupt if FREQIE bit is set in SAI_xIM register."]
    #[inline(always)]
    pub fn freq(&self) -> FREQR {
        let bits = ((self.bits >> 3) & 0x01) != 0;
        FREQR { bits }
    }
    #[doc = "Bit 4 - Codec not ready. This bit is read only. This bit is used only when the AC97 audio protocol is selected in the SAI_xCR1 register and configured in receiver mode. It can generate an interrupt if CNRDYIE bit is set in SAI_xIM register. This flag is cleared when the software sets CCNRDY bit in SAI_xCLRFR register."]
    #[inline(always)]
    pub fn cnrdy(&self) -> CNRDYR {
        let bits = ((self.bits >> 4) & 0x01) != 0;
        CNRDYR { bits }
    }
    #[doc = "Bit 5 - Anticipated frame synchronization detection. This bit is read only. This flag can be set only if the audio block is configured in slave mode. It is not used in AC97or SPDIF mode. It can generate an interrupt if AFSDETIE bit is set in SAI_xIM register. This flag is cleared when the software sets CAFSDET bit in SAI_xCLRFR register."]
    #[inline(always)]
    pub fn afsdet(&self) -> AFSDETR {
        let bits = ((self.bits >> 5) & 0x01) != 0;
        AFSDETR { bits }
    }
    #[doc = "Bit 6 - Late frame synchronization detection. This bit is read only. This flag can be set only if the audio block is configured in slave mode. It is not used in AC97 or SPDIF mode. It can generate an interrupt if LFSDETIE bit is set in the SAI_xIM register. This flag is cleared when the software sets bit CLFSDET in SAI_xCLRFR register"]
    #[inline(always)]
    pub fn lfsdet(&self) -> LFSDETR {
        let bits = ((self.bits >> 6) & 0x01) != 0;
        LFSDETR { bits }
    }
    #[doc = "Bits 16:18 - FIFO level threshold. This bit is read only. The FIFO level threshold flag is managed only by hardware and its setting depends on SAI block configuration (transmitter or receiver mode). If the SAI block is configured as transmitter: If SAI block is configured as receiver:"]
    #[inline(always)]
    pub fn flvl(&self) -> FLVLR {
        let bits = ((self.bits >> 16) & 0x07) as u8;
        FLVLR { bits }
    }
}