#[doc = r"Value read from the register"]
pub struct R {
    bits: u32,
}
#[doc = r"Value to write to the register"]
pub struct W {
    bits: u32,
}
impl super::POWER {
    #[doc = r"Modifies the contents of the register"]
    #[inline(always)]
    pub fn modify<F>(&self, f: F)
    where
        for<'w> F: FnOnce(&R, &'w mut W) -> &'w mut W,
    {
        let bits = self.register.get();
        self.register.set(f(&R { bits }, &mut W { bits }).bits);
    }
    #[doc = r"Reads the contents of the register"]
    #[inline(always)]
    pub fn read(&self) -> R {
        R {
            bits: self.register.get(),
        }
    }
    #[doc = r"Writes to the register"]
    #[inline(always)]
    pub fn write<F>(&self, f: F)
    where
        F: FnOnce(&mut W) -> &mut W,
    {
        self.register.set(
            f(&mut W {
                bits: Self::reset_value(),
            })
            .bits,
        );
    }
    #[doc = r"Reset value of the register"]
    #[inline(always)]
    pub const fn reset_value() -> u32 {
        0
    }
    #[doc = r"Writes the reset value to the register"]
    #[inline(always)]
    pub fn reset(&self) {
        self.register.set(Self::reset_value())
    }
}
#[doc = r"Value of the field"]
pub struct PWRCTRLR {
    bits: u8,
}
impl PWRCTRLR {
    #[doc = r"Value of the field as raw bits"]
    #[inline(always)]
    pub fn bits(&self) -> u8 {
        self.bits
    }
}
#[doc = r"Proxy"]
pub struct _PWRCTRLW<'a> {
    w: &'a mut W,
}
impl<'a> _PWRCTRLW<'a> {
    #[doc = r"Writes raw bits to the field"]
    #[inline(always)]
    pub unsafe fn bits(self, value: u8) -> &'a mut W {
        self.w.bits &= !(0x03 << 0);
        self.w.bits |= ((value as u32) & 0x03) << 0;
        self.w
    }
}
#[doc = r"Value of the field"]
pub struct VSWITCHR {
    bits: bool,
}
impl VSWITCHR {
    #[doc = r"Value of the field as raw bits"]
    #[inline(always)]
    pub fn bit(&self) -> bool {
        self.bits
    }
    #[doc = r"Returns `true` if the bit is clear (0)"]
    #[inline(always)]
    pub fn bit_is_clear(&self) -> bool {
        !self.bit()
    }
    #[doc = r"Returns `true` if the bit is set (1)"]
    #[inline(always)]
    pub fn bit_is_set(&self) -> bool {
        self.bit()
    }
}
#[doc = r"Proxy"]
pub struct _VSWITCHW<'a> {
    w: &'a mut W,
}
impl<'a> _VSWITCHW<'a> {
    #[doc = r"Sets the field bit"]
    #[inline(always)]
    pub fn set_bit(self) -> &'a mut W {
        self.bit(true)
    }
    #[doc = r"Clears the field bit"]
    #[inline(always)]
    pub fn clear_bit(self) -> &'a mut W {
        self.bit(false)
    }
    #[doc = r"Writes raw bits to the field"]
    #[inline(always)]
    pub fn bit(self, value: bool) -> &'a mut W {
        self.w.bits &= !(0x01 << 2);
        self.w.bits |= ((value as u32) & 0x01) << 2;
        self.w
    }
}
#[doc = r"Value of the field"]
pub struct VSWITCHENR {
    bits: bool,
}
impl VSWITCHENR {
    #[doc = r"Value of the field as raw bits"]
    #[inline(always)]
    pub fn bit(&self) -> bool {
        self.bits
    }
    #[doc = r"Returns `true` if the bit is clear (0)"]
    #[inline(always)]
    pub fn bit_is_clear(&self) -> bool {
        !self.bit()
    }
    #[doc = r"Returns `true` if the bit is set (1)"]
    #[inline(always)]
    pub fn bit_is_set(&self) -> bool {
        self.bit()
    }
}
#[doc = r"Proxy"]
pub struct _VSWITCHENW<'a> {
    w: &'a mut W,
}
impl<'a> _VSWITCHENW<'a> {
    #[doc = r"Sets the field bit"]
    #[inline(always)]
    pub fn set_bit(self) -> &'a mut W {
        self.bit(true)
    }
    #[doc = r"Clears the field bit"]
    #[inline(always)]
    pub fn clear_bit(self) -> &'a mut W {
        self.bit(false)
    }
    #[doc = r"Writes raw bits to the field"]
    #[inline(always)]
    pub fn bit(self, value: bool) -> &'a mut W {
        self.w.bits &= !(0x01 << 3);
        self.w.bits |= ((value as u32) & 0x01) << 3;
        self.w
    }
}
#[doc = r"Value of the field"]
pub struct DIRPOLR {
    bits: bool,
}
impl DIRPOLR {
    #[doc = r"Value of the field as raw bits"]
    #[inline(always)]
    pub fn bit(&self) -> bool {
        self.bits
    }
    #[doc = r"Returns `true` if the bit is clear (0)"]
    #[inline(always)]
    pub fn bit_is_clear(&self) -> bool {
        !self.bit()
    }
    #[doc = r"Returns `true` if the bit is set (1)"]
    #[inline(always)]
    pub fn bit_is_set(&self) -> bool {
        self.bit()
    }
}
#[doc = r"Proxy"]
pub struct _DIRPOLW<'a> {
    w: &'a mut W,
}
impl<'a> _DIRPOLW<'a> {
    #[doc = r"Sets the field bit"]
    #[inline(always)]
    pub fn set_bit(self) -> &'a mut W {
        self.bit(true)
    }
    #[doc = r"Clears the field bit"]
    #[inline(always)]
    pub fn clear_bit(self) -> &'a mut W {
        self.bit(false)
    }
    #[doc = r"Writes raw bits to the field"]
    #[inline(always)]
    pub fn bit(self, value: bool) -> &'a mut W {
        self.w.bits &= !(0x01 << 4);
        self.w.bits |= ((value as u32) & 0x01) << 4;
        self.w
    }
}
impl R {
    #[doc = r"Value of the register as raw bits"]
    #[inline(always)]
    pub fn bits(&self) -> u32 {
        self.bits
    }
    #[doc = "Bits 0:1 - SDMMC state control bits. These bits can only be written when the SDMMC is not in the power-on state (PWRCTRL?11). These bits are used to define the functional state of the SDMMC signals: Any further write will be ignored, PWRCTRL value will keep 11."]
    #[inline(always)]
    pub fn pwrctrl(&self) -> PWRCTRLR {
        let bits = ((self.bits >> 0) & 0x03) as u8;
        PWRCTRLR { bits }
    }
    #[doc = "Bit 2 - Voltage switch sequence start. This bit is used to start the timing critical section of the voltage switch sequence:"]
    #[inline(always)]
    pub fn vswitch(&self) -> VSWITCHR {
        let bits = ((self.bits >> 2) & 0x01) != 0;
        VSWITCHR { bits }
    }
    #[doc = "Bit 3 - Voltage switch procedure enable. This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0). This bit is used to stop the SDMMC_CK after the voltage switch command response:"]
    #[inline(always)]
    pub fn vswitchen(&self) -> VSWITCHENR {
        let bits = ((self.bits >> 3) & 0x01) != 0;
        VSWITCHENR { bits }
    }
    #[doc = "Bit 4 - Data and command direction signals polarity selection. This bit can only be written when the SDMMC is in the power-off state (PWRCTRL = 00)."]
    #[inline(always)]
    pub fn dirpol(&self) -> DIRPOLR {
        let bits = ((self.bits >> 4) & 0x01) != 0;
        DIRPOLR { bits }
    }
}
impl W {
    #[doc = r"Writes raw bits to the register"]
    #[inline(always)]
    pub unsafe fn bits(&mut self, bits: u32) -> &mut Self {
        self.bits = bits;
        self
    }
    #[doc = "Bits 0:1 - SDMMC state control bits. These bits can only be written when the SDMMC is not in the power-on state (PWRCTRL?11). These bits are used to define the functional state of the SDMMC signals: Any further write will be ignored, PWRCTRL value will keep 11."]
    #[inline(always)]
    pub fn pwrctrl(&mut self) -> _PWRCTRLW {
        _PWRCTRLW { w: self }
    }
    #[doc = "Bit 2 - Voltage switch sequence start. This bit is used to start the timing critical section of the voltage switch sequence:"]
    #[inline(always)]
    pub fn vswitch(&mut self) -> _VSWITCHW {
        _VSWITCHW { w: self }
    }
    #[doc = "Bit 3 - Voltage switch procedure enable. This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0). This bit is used to stop the SDMMC_CK after the voltage switch command response:"]
    #[inline(always)]
    pub fn vswitchen(&mut self) -> _VSWITCHENW {
        _VSWITCHENW { w: self }
    }
    #[doc = "Bit 4 - Data and command direction signals polarity selection. This bit can only be written when the SDMMC is in the power-off state (PWRCTRL = 00)."]
    #[inline(always)]
    pub fn dirpol(&mut self) -> _DIRPOLW {
        _DIRPOLW { w: self }
    }
}