1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
#[doc = "Register `ISR` reader"]
pub struct R(crate::R<ISR_SPEC>);
impl core::ops::Deref for R {
type Target = crate::R<ISR_SPEC>;
#[inline(always)]
fn deref(&self) -> &Self::Target {
&self.0
}
}
impl From<crate::R<ISR_SPEC>> for R {
#[inline(always)]
fn from(reader: crate::R<ISR_SPEC>) -> Self {
R(reader)
}
}
#[doc = "Register `ISR` writer"]
pub struct W(crate::W<ISR_SPEC>);
impl core::ops::Deref for W {
type Target = crate::W<ISR_SPEC>;
#[inline(always)]
fn deref(&self) -> &Self::Target {
&self.0
}
}
impl core::ops::DerefMut for W {
#[inline(always)]
fn deref_mut(&mut self) -> &mut Self::Target {
&mut self.0
}
}
impl From<crate::W<ISR_SPEC>> for W {
#[inline(always)]
fn from(writer: crate::W<ISR_SPEC>) -> Self {
W(writer)
}
}
#[doc = "Field `RXBR` reader - Rx-Byte Received The RXBR bit is set by hardware to inform application that a new byte has been received from the CEC line and stored into the RXD buffer. RXBR is cleared by software write at 1."]
pub type RXBR_R = crate::BitReader<bool>;
#[doc = "Field `RXBR` writer - Rx-Byte Received The RXBR bit is set by hardware to inform application that a new byte has been received from the CEC line and stored into the RXD buffer. RXBR is cleared by software write at 1."]
pub type RXBR_W<'a, const O: u8> = crate::BitWriter<'a, u32, ISR_SPEC, bool, O>;
#[doc = "Field `RXEND` reader - End Of Reception RXEND is set by hardware to inform application that the last byte of a CEC message is received from the CEC line and stored into the RXD buffer. RXEND is set at the same time of RXBR. RXEND is cleared by software write at 1."]
pub type RXEND_R = crate::BitReader<bool>;
#[doc = "Field `RXEND` writer - End Of Reception RXEND is set by hardware to inform application that the last byte of a CEC message is received from the CEC line and stored into the RXD buffer. RXEND is set at the same time of RXBR. RXEND is cleared by software write at 1."]
pub type RXEND_W<'a, const O: u8> = crate::BitWriter<'a, u32, ISR_SPEC, bool, O>;
#[doc = "Field `RXOVR` reader - Rx-Overrun RXOVR is set by hardware if RXBR is not yet cleared at the time a new byte is received on the CEC line and stored into RXD. RXOVR assertion stops message reception so that no acknowledge is sent. In case of broadcast, a negative acknowledge is sent. RXOVR is cleared by software write at 1."]
pub type RXOVR_R = crate::BitReader<bool>;
#[doc = "Field `RXOVR` writer - Rx-Overrun RXOVR is set by hardware if RXBR is not yet cleared at the time a new byte is received on the CEC line and stored into RXD. RXOVR assertion stops message reception so that no acknowledge is sent. In case of broadcast, a negative acknowledge is sent. RXOVR is cleared by software write at 1."]
pub type RXOVR_W<'a, const O: u8> = crate::BitWriter<'a, u32, ISR_SPEC, bool, O>;
#[doc = "Field `BRE` reader - Rx-Bit Rising Error BRE is set by hardware in case a Data-Bit waveform is detected with Bit Rising Error. BRE is set either at the time the misplaced rising edge occurs, or at the end of the maximum BRE tolerance allowed by RXTOL, in case rising edge is still longing. BRE stops message reception if BRESTP=1. BRE generates an Error-Bit on the CEC line if BREGEN=1. BRE is cleared by software write at 1."]
pub type BRE_R = crate::BitReader<bool>;
#[doc = "Field `BRE` writer - Rx-Bit Rising Error BRE is set by hardware in case a Data-Bit waveform is detected with Bit Rising Error. BRE is set either at the time the misplaced rising edge occurs, or at the end of the maximum BRE tolerance allowed by RXTOL, in case rising edge is still longing. BRE stops message reception if BRESTP=1. BRE generates an Error-Bit on the CEC line if BREGEN=1. BRE is cleared by software write at 1."]
pub type BRE_W<'a, const O: u8> = crate::BitWriter<'a, u32, ISR_SPEC, bool, O>;
#[doc = "Field `SBPE` reader - Rx-Short Bit Period Error SBPE is set by hardware in case a Data-Bit waveform is detected with Short Bit Period Error. SBPE is set at the time the anticipated falling edge occurs. SBPE generates an Error-Bit on the CEC line. SBPE is cleared by software write at 1."]
pub type SBPE_R = crate::BitReader<bool>;
#[doc = "Field `SBPE` writer - Rx-Short Bit Period Error SBPE is set by hardware in case a Data-Bit waveform is detected with Short Bit Period Error. SBPE is set at the time the anticipated falling edge occurs. SBPE generates an Error-Bit on the CEC line. SBPE is cleared by software write at 1."]
pub type SBPE_W<'a, const O: u8> = crate::BitWriter<'a, u32, ISR_SPEC, bool, O>;
#[doc = "Field `LBPE` reader - Rx-Long Bit Period Error LBPE is set by hardware in case a Data-Bit waveform is detected with Long Bit Period Error. LBPE is set at the end of the maximum bit-extension tolerance allowed by RXTOL, in case falling edge is still longing. LBPE always stops reception of the CEC message. LBPE generates an Error-Bit on the CEC line if LBPEGEN=1. In case of broadcast, Error-Bit is generated even in case of LBPEGEN=0. LBPE is cleared by software write at 1."]
pub type LBPE_R = crate::BitReader<bool>;
#[doc = "Field `LBPE` writer - Rx-Long Bit Period Error LBPE is set by hardware in case a Data-Bit waveform is detected with Long Bit Period Error. LBPE is set at the end of the maximum bit-extension tolerance allowed by RXTOL, in case falling edge is still longing. LBPE always stops reception of the CEC message. LBPE generates an Error-Bit on the CEC line if LBPEGEN=1. In case of broadcast, Error-Bit is generated even in case of LBPEGEN=0. LBPE is cleared by software write at 1."]
pub type LBPE_W<'a, const O: u8> = crate::BitWriter<'a, u32, ISR_SPEC, bool, O>;
#[doc = "Field `RXACKE` reader - Rx-Missing Acknowledge In receive mode, RXACKE is set by hardware to inform application that no acknowledge was seen on the CEC line. RXACKE applies only for broadcast messages and in listen mode also for not directly addressed messages (destination address not enabled in OAR). RXACKE aborts message reception. RXACKE is cleared by software write at 1."]
pub type RXACKE_R = crate::BitReader<bool>;
#[doc = "Field `RXACKE` writer - Rx-Missing Acknowledge In receive mode, RXACKE is set by hardware to inform application that no acknowledge was seen on the CEC line. RXACKE applies only for broadcast messages and in listen mode also for not directly addressed messages (destination address not enabled in OAR). RXACKE aborts message reception. RXACKE is cleared by software write at 1."]
pub type RXACKE_W<'a, const O: u8> = crate::BitWriter<'a, u32, ISR_SPEC, bool, O>;
#[doc = "Field `ARBLST` reader - Arbitration Lost ARBLST is set by hardware to inform application that CEC device is switching to reception due to arbitration lost event following the TXSOM command. ARBLST can be due either to a contending CEC device starting earlier or starting at the same time but with higher HEADER priority. After ARBLST assertion TXSOM bit keeps pending for next transmission attempt. ARBLST is cleared by software write at 1."]
pub type ARBLST_R = crate::BitReader<bool>;
#[doc = "Field `ARBLST` writer - Arbitration Lost ARBLST is set by hardware to inform application that CEC device is switching to reception due to arbitration lost event following the TXSOM command. ARBLST can be due either to a contending CEC device starting earlier or starting at the same time but with higher HEADER priority. After ARBLST assertion TXSOM bit keeps pending for next transmission attempt. ARBLST is cleared by software write at 1."]
pub type ARBLST_W<'a, const O: u8> = crate::BitWriter<'a, u32, ISR_SPEC, bool, O>;
#[doc = "Field `TXBR` reader - Tx-Byte Request TXBR is set by hardware to inform application that the next transmission data has to be written to TXDR. TXBR is set when the 4th bit of currently transmitted byte is sent. Application must write the next byte to TXDR within 6 nominal data-bit periods before transmission underrun error occurs (TXUDR). TXBR is cleared by software write at 1."]
pub type TXBR_R = crate::BitReader<bool>;
#[doc = "Field `TXBR` writer - Tx-Byte Request TXBR is set by hardware to inform application that the next transmission data has to be written to TXDR. TXBR is set when the 4th bit of currently transmitted byte is sent. Application must write the next byte to TXDR within 6 nominal data-bit periods before transmission underrun error occurs (TXUDR). TXBR is cleared by software write at 1."]
pub type TXBR_W<'a, const O: u8> = crate::BitWriter<'a, u32, ISR_SPEC, bool, O>;
#[doc = "Field `TXEND` reader - End of Transmission TXEND is set by hardware to inform application that the last byte of the CEC message has been successfully transmitted. TXEND clears the TXSOM and TXEOM control bits. TXEND is cleared by software write at 1."]
pub type TXEND_R = crate::BitReader<bool>;
#[doc = "Field `TXEND` writer - End of Transmission TXEND is set by hardware to inform application that the last byte of the CEC message has been successfully transmitted. TXEND clears the TXSOM and TXEOM control bits. TXEND is cleared by software write at 1."]
pub type TXEND_W<'a, const O: u8> = crate::BitWriter<'a, u32, ISR_SPEC, bool, O>;
#[doc = "Field `TXUDR` reader - Tx-Buffer Underrun In transmission mode, TXUDR is set by hardware if application was not in time to load TXDR before of next byte transmission. TXUDR aborts message transmission and clears TXSOM and TXEOM control bits. TXUDR is cleared by software write at 1"]
pub type TXUDR_R = crate::BitReader<bool>;
#[doc = "Field `TXUDR` writer - Tx-Buffer Underrun In transmission mode, TXUDR is set by hardware if application was not in time to load TXDR before of next byte transmission. TXUDR aborts message transmission and clears TXSOM and TXEOM control bits. TXUDR is cleared by software write at 1"]
pub type TXUDR_W<'a, const O: u8> = crate::BitWriter<'a, u32, ISR_SPEC, bool, O>;
#[doc = "Field `TXERR` reader - Tx-Error In transmission mode, TXERR is set by hardware if the CEC initiator detects low impedance on the CEC line while it is released. TXERR aborts message transmission and clears TXSOM and TXEOM controls. TXERR is cleared by software write at 1."]
pub type TXERR_R = crate::BitReader<bool>;
#[doc = "Field `TXERR` writer - Tx-Error In transmission mode, TXERR is set by hardware if the CEC initiator detects low impedance on the CEC line while it is released. TXERR aborts message transmission and clears TXSOM and TXEOM controls. TXERR is cleared by software write at 1."]
pub type TXERR_W<'a, const O: u8> = crate::BitWriter<'a, u32, ISR_SPEC, bool, O>;
#[doc = "Field `TXACKE` reader - Tx-Missing Acknowledge Error In transmission mode, TXACKE is set by hardware to inform application that no acknowledge was received. In case of broadcast transmission, TXACKE informs application that a negative acknowledge was received. TXACKE aborts message transmission and clears TXSOM and TXEOM controls. TXACKE is cleared by software write at 1."]
pub type TXACKE_R = crate::BitReader<bool>;
#[doc = "Field `TXACKE` writer - Tx-Missing Acknowledge Error In transmission mode, TXACKE is set by hardware to inform application that no acknowledge was received. In case of broadcast transmission, TXACKE informs application that a negative acknowledge was received. TXACKE aborts message transmission and clears TXSOM and TXEOM controls. TXACKE is cleared by software write at 1."]
pub type TXACKE_W<'a, const O: u8> = crate::BitWriter<'a, u32, ISR_SPEC, bool, O>;
impl R {
#[doc = "Bit 0 - Rx-Byte Received The RXBR bit is set by hardware to inform application that a new byte has been received from the CEC line and stored into the RXD buffer. RXBR is cleared by software write at 1."]
#[inline(always)]
pub fn rxbr(&self) -> RXBR_R {
RXBR_R::new((self.bits & 1) != 0)
}
#[doc = "Bit 1 - End Of Reception RXEND is set by hardware to inform application that the last byte of a CEC message is received from the CEC line and stored into the RXD buffer. RXEND is set at the same time of RXBR. RXEND is cleared by software write at 1."]
#[inline(always)]
pub fn rxend(&self) -> RXEND_R {
RXEND_R::new(((self.bits >> 1) & 1) != 0)
}
#[doc = "Bit 2 - Rx-Overrun RXOVR is set by hardware if RXBR is not yet cleared at the time a new byte is received on the CEC line and stored into RXD. RXOVR assertion stops message reception so that no acknowledge is sent. In case of broadcast, a negative acknowledge is sent. RXOVR is cleared by software write at 1."]
#[inline(always)]
pub fn rxovr(&self) -> RXOVR_R {
RXOVR_R::new(((self.bits >> 2) & 1) != 0)
}
#[doc = "Bit 3 - Rx-Bit Rising Error BRE is set by hardware in case a Data-Bit waveform is detected with Bit Rising Error. BRE is set either at the time the misplaced rising edge occurs, or at the end of the maximum BRE tolerance allowed by RXTOL, in case rising edge is still longing. BRE stops message reception if BRESTP=1. BRE generates an Error-Bit on the CEC line if BREGEN=1. BRE is cleared by software write at 1."]
#[inline(always)]
pub fn bre(&self) -> BRE_R {
BRE_R::new(((self.bits >> 3) & 1) != 0)
}
#[doc = "Bit 4 - Rx-Short Bit Period Error SBPE is set by hardware in case a Data-Bit waveform is detected with Short Bit Period Error. SBPE is set at the time the anticipated falling edge occurs. SBPE generates an Error-Bit on the CEC line. SBPE is cleared by software write at 1."]
#[inline(always)]
pub fn sbpe(&self) -> SBPE_R {
SBPE_R::new(((self.bits >> 4) & 1) != 0)
}
#[doc = "Bit 5 - Rx-Long Bit Period Error LBPE is set by hardware in case a Data-Bit waveform is detected with Long Bit Period Error. LBPE is set at the end of the maximum bit-extension tolerance allowed by RXTOL, in case falling edge is still longing. LBPE always stops reception of the CEC message. LBPE generates an Error-Bit on the CEC line if LBPEGEN=1. In case of broadcast, Error-Bit is generated even in case of LBPEGEN=0. LBPE is cleared by software write at 1."]
#[inline(always)]
pub fn lbpe(&self) -> LBPE_R {
LBPE_R::new(((self.bits >> 5) & 1) != 0)
}
#[doc = "Bit 6 - Rx-Missing Acknowledge In receive mode, RXACKE is set by hardware to inform application that no acknowledge was seen on the CEC line. RXACKE applies only for broadcast messages and in listen mode also for not directly addressed messages (destination address not enabled in OAR). RXACKE aborts message reception. RXACKE is cleared by software write at 1."]
#[inline(always)]
pub fn rxacke(&self) -> RXACKE_R {
RXACKE_R::new(((self.bits >> 6) & 1) != 0)
}
#[doc = "Bit 7 - Arbitration Lost ARBLST is set by hardware to inform application that CEC device is switching to reception due to arbitration lost event following the TXSOM command. ARBLST can be due either to a contending CEC device starting earlier or starting at the same time but with higher HEADER priority. After ARBLST assertion TXSOM bit keeps pending for next transmission attempt. ARBLST is cleared by software write at 1."]
#[inline(always)]
pub fn arblst(&self) -> ARBLST_R {
ARBLST_R::new(((self.bits >> 7) & 1) != 0)
}
#[doc = "Bit 8 - Tx-Byte Request TXBR is set by hardware to inform application that the next transmission data has to be written to TXDR. TXBR is set when the 4th bit of currently transmitted byte is sent. Application must write the next byte to TXDR within 6 nominal data-bit periods before transmission underrun error occurs (TXUDR). TXBR is cleared by software write at 1."]
#[inline(always)]
pub fn txbr(&self) -> TXBR_R {
TXBR_R::new(((self.bits >> 8) & 1) != 0)
}
#[doc = "Bit 9 - End of Transmission TXEND is set by hardware to inform application that the last byte of the CEC message has been successfully transmitted. TXEND clears the TXSOM and TXEOM control bits. TXEND is cleared by software write at 1."]
#[inline(always)]
pub fn txend(&self) -> TXEND_R {
TXEND_R::new(((self.bits >> 9) & 1) != 0)
}
#[doc = "Bit 10 - Tx-Buffer Underrun In transmission mode, TXUDR is set by hardware if application was not in time to load TXDR before of next byte transmission. TXUDR aborts message transmission and clears TXSOM and TXEOM control bits. TXUDR is cleared by software write at 1"]
#[inline(always)]
pub fn txudr(&self) -> TXUDR_R {
TXUDR_R::new(((self.bits >> 10) & 1) != 0)
}
#[doc = "Bit 11 - Tx-Error In transmission mode, TXERR is set by hardware if the CEC initiator detects low impedance on the CEC line while it is released. TXERR aborts message transmission and clears TXSOM and TXEOM controls. TXERR is cleared by software write at 1."]
#[inline(always)]
pub fn txerr(&self) -> TXERR_R {
TXERR_R::new(((self.bits >> 11) & 1) != 0)
}
#[doc = "Bit 12 - Tx-Missing Acknowledge Error In transmission mode, TXACKE is set by hardware to inform application that no acknowledge was received. In case of broadcast transmission, TXACKE informs application that a negative acknowledge was received. TXACKE aborts message transmission and clears TXSOM and TXEOM controls. TXACKE is cleared by software write at 1."]
#[inline(always)]
pub fn txacke(&self) -> TXACKE_R {
TXACKE_R::new(((self.bits >> 12) & 1) != 0)
}
}
impl W {
#[doc = "Bit 0 - Rx-Byte Received The RXBR bit is set by hardware to inform application that a new byte has been received from the CEC line and stored into the RXD buffer. RXBR is cleared by software write at 1."]
#[inline(always)]
pub fn rxbr(&mut self) -> RXBR_W<0> {
RXBR_W::new(self)
}
#[doc = "Bit 1 - End Of Reception RXEND is set by hardware to inform application that the last byte of a CEC message is received from the CEC line and stored into the RXD buffer. RXEND is set at the same time of RXBR. RXEND is cleared by software write at 1."]
#[inline(always)]
pub fn rxend(&mut self) -> RXEND_W<1> {
RXEND_W::new(self)
}
#[doc = "Bit 2 - Rx-Overrun RXOVR is set by hardware if RXBR is not yet cleared at the time a new byte is received on the CEC line and stored into RXD. RXOVR assertion stops message reception so that no acknowledge is sent. In case of broadcast, a negative acknowledge is sent. RXOVR is cleared by software write at 1."]
#[inline(always)]
pub fn rxovr(&mut self) -> RXOVR_W<2> {
RXOVR_W::new(self)
}
#[doc = "Bit 3 - Rx-Bit Rising Error BRE is set by hardware in case a Data-Bit waveform is detected with Bit Rising Error. BRE is set either at the time the misplaced rising edge occurs, or at the end of the maximum BRE tolerance allowed by RXTOL, in case rising edge is still longing. BRE stops message reception if BRESTP=1. BRE generates an Error-Bit on the CEC line if BREGEN=1. BRE is cleared by software write at 1."]
#[inline(always)]
pub fn bre(&mut self) -> BRE_W<3> {
BRE_W::new(self)
}
#[doc = "Bit 4 - Rx-Short Bit Period Error SBPE is set by hardware in case a Data-Bit waveform is detected with Short Bit Period Error. SBPE is set at the time the anticipated falling edge occurs. SBPE generates an Error-Bit on the CEC line. SBPE is cleared by software write at 1."]
#[inline(always)]
pub fn sbpe(&mut self) -> SBPE_W<4> {
SBPE_W::new(self)
}
#[doc = "Bit 5 - Rx-Long Bit Period Error LBPE is set by hardware in case a Data-Bit waveform is detected with Long Bit Period Error. LBPE is set at the end of the maximum bit-extension tolerance allowed by RXTOL, in case falling edge is still longing. LBPE always stops reception of the CEC message. LBPE generates an Error-Bit on the CEC line if LBPEGEN=1. In case of broadcast, Error-Bit is generated even in case of LBPEGEN=0. LBPE is cleared by software write at 1."]
#[inline(always)]
pub fn lbpe(&mut self) -> LBPE_W<5> {
LBPE_W::new(self)
}
#[doc = "Bit 6 - Rx-Missing Acknowledge In receive mode, RXACKE is set by hardware to inform application that no acknowledge was seen on the CEC line. RXACKE applies only for broadcast messages and in listen mode also for not directly addressed messages (destination address not enabled in OAR). RXACKE aborts message reception. RXACKE is cleared by software write at 1."]
#[inline(always)]
pub fn rxacke(&mut self) -> RXACKE_W<6> {
RXACKE_W::new(self)
}
#[doc = "Bit 7 - Arbitration Lost ARBLST is set by hardware to inform application that CEC device is switching to reception due to arbitration lost event following the TXSOM command. ARBLST can be due either to a contending CEC device starting earlier or starting at the same time but with higher HEADER priority. After ARBLST assertion TXSOM bit keeps pending for next transmission attempt. ARBLST is cleared by software write at 1."]
#[inline(always)]
pub fn arblst(&mut self) -> ARBLST_W<7> {
ARBLST_W::new(self)
}
#[doc = "Bit 8 - Tx-Byte Request TXBR is set by hardware to inform application that the next transmission data has to be written to TXDR. TXBR is set when the 4th bit of currently transmitted byte is sent. Application must write the next byte to TXDR within 6 nominal data-bit periods before transmission underrun error occurs (TXUDR). TXBR is cleared by software write at 1."]
#[inline(always)]
pub fn txbr(&mut self) -> TXBR_W<8> {
TXBR_W::new(self)
}
#[doc = "Bit 9 - End of Transmission TXEND is set by hardware to inform application that the last byte of the CEC message has been successfully transmitted. TXEND clears the TXSOM and TXEOM control bits. TXEND is cleared by software write at 1."]
#[inline(always)]
pub fn txend(&mut self) -> TXEND_W<9> {
TXEND_W::new(self)
}
#[doc = "Bit 10 - Tx-Buffer Underrun In transmission mode, TXUDR is set by hardware if application was not in time to load TXDR before of next byte transmission. TXUDR aborts message transmission and clears TXSOM and TXEOM control bits. TXUDR is cleared by software write at 1"]
#[inline(always)]
pub fn txudr(&mut self) -> TXUDR_W<10> {
TXUDR_W::new(self)
}
#[doc = "Bit 11 - Tx-Error In transmission mode, TXERR is set by hardware if the CEC initiator detects low impedance on the CEC line while it is released. TXERR aborts message transmission and clears TXSOM and TXEOM controls. TXERR is cleared by software write at 1."]
#[inline(always)]
pub fn txerr(&mut self) -> TXERR_W<11> {
TXERR_W::new(self)
}
#[doc = "Bit 12 - Tx-Missing Acknowledge Error In transmission mode, TXACKE is set by hardware to inform application that no acknowledge was received. In case of broadcast transmission, TXACKE informs application that a negative acknowledge was received. TXACKE aborts message transmission and clears TXSOM and TXEOM controls. TXACKE is cleared by software write at 1."]
#[inline(always)]
pub fn txacke(&mut self) -> TXACKE_W<12> {
TXACKE_W::new(self)
}
#[doc = "Writes raw bits to the register."]
#[inline(always)]
pub unsafe fn bits(&mut self, bits: u32) -> &mut Self {
self.0.bits(bits);
self
}
}
#[doc = "CEC Interrupt and Status Register\n\nThis register you can [`read`](crate::generic::Reg::read), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [isr](index.html) module"]
pub struct ISR_SPEC;
impl crate::RegisterSpec for ISR_SPEC {
type Ux = u32;
}
#[doc = "`read()` method returns [isr::R](R) reader structure"]
impl crate::Readable for ISR_SPEC {
type Reader = R;
}
#[doc = "`write(|w| ..)` method takes [isr::W](W) writer structure"]
impl crate::Writable for ISR_SPEC {
type Writer = W;
}
#[doc = "`reset()` method sets ISR to value 0"]
impl crate::Resettable for ISR_SPEC {
#[inline(always)]
fn reset_value() -> Self::Ux {
0
}
}
