#[doc = "Reader of register CR2"]
pub type R = crate::R<u32, super::CR2>;
#[doc = "Writer for register CR2"]
pub type W = crate::W<u32, super::CR2>;
#[doc = "Register CR2 `reset()`'s with value 0"]
impl crate::ResetValue for super::CR2 {
type Type = u32;
#[inline(always)]
fn reset_value() -> Self::Type {
0
}
}
#[doc = "FIFO threshold. This bit is set and cleared by software.\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq)]
#[repr(u8)]
pub enum FTH_A {
#[doc = "0: FIFO empty"]
EMPTY = 0,
#[doc = "1: 1\u{2044}4 FIFO"]
QUARTER1 = 1,
#[doc = "2: 1\u{2044}2 FIFO"]
QUARTER2 = 2,
#[doc = "3: 3\u{2044}4 FIFO"]
QUARTER3 = 3,
#[doc = "4: FIFO full"]
FULL = 4,
}
impl From<FTH_A> for u8 {
#[inline(always)]
fn from(variant: FTH_A) -> Self {
variant as _
}
}
#[doc = "Reader of field `FTH`"]
pub type FTH_R = crate::R<u8, FTH_A>;
impl FTH_R {
#[doc = r"Get enumerated values variant"]
#[inline(always)]
pub fn variant(&self) -> crate::Variant<u8, FTH_A> {
use crate::Variant::*;
match self.bits {
0 => Val(FTH_A::EMPTY),
1 => Val(FTH_A::QUARTER1),
2 => Val(FTH_A::QUARTER2),
3 => Val(FTH_A::QUARTER3),
4 => Val(FTH_A::FULL),
i => Res(i),
}
}
#[doc = "Checks if the value of the field is `EMPTY`"]
#[inline(always)]
pub fn is_empty(&self) -> bool {
*self == FTH_A::EMPTY
}
#[doc = "Checks if the value of the field is `QUARTER1`"]
#[inline(always)]
pub fn is_quarter1(&self) -> bool {
*self == FTH_A::QUARTER1
}
#[doc = "Checks if the value of the field is `QUARTER2`"]
#[inline(always)]
pub fn is_quarter2(&self) -> bool {
*self == FTH_A::QUARTER2
}
#[doc = "Checks if the value of the field is `QUARTER3`"]
#[inline(always)]
pub fn is_quarter3(&self) -> bool {
*self == FTH_A::QUARTER3
}
#[doc = "Checks if the value of the field is `FULL`"]
#[inline(always)]
pub fn is_full(&self) -> bool {
*self == FTH_A::FULL
}
}
#[doc = "Write proxy for field `FTH`"]
pub struct FTH_W<'a> {
w: &'a mut W,
}
impl<'a> FTH_W<'a> {
#[doc = r"Writes `variant` to the field"]
#[inline(always)]
pub fn variant(self, variant: FTH_A) -> &'a mut W {
unsafe { self.bits(variant.into()) }
}
#[doc = "FIFO empty"]
#[inline(always)]
pub fn empty(self) -> &'a mut W {
self.variant(FTH_A::EMPTY)
}
#[doc = "1\u{2044}4 FIFO"]
#[inline(always)]
pub fn quarter1(self) -> &'a mut W {
self.variant(FTH_A::QUARTER1)
}
#[doc = "1\u{2044}2 FIFO"]
#[inline(always)]
pub fn quarter2(self) -> &'a mut W {
self.variant(FTH_A::QUARTER2)
}
#[doc = "3\u{2044}4 FIFO"]
#[inline(always)]
pub fn quarter3(self) -> &'a mut W {
self.variant(FTH_A::QUARTER3)
}
#[doc = "FIFO full"]
#[inline(always)]
pub fn full(self) -> &'a mut W {
self.variant(FTH_A::FULL)
}
#[doc = r"Writes raw bits to the field"]
#[inline(always)]
pub unsafe fn bits(self, value: u8) -> &'a mut W {
self.w.bits = (self.w.bits & !0x07) | ((value as u32) & 0x07);
self.w
}
}
#[doc = "FIFO flush. This bit is set by software. It is always read as 0. This bit should be configured when the SAI is disabled.\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq)]
pub enum FFLUSH_AW {
#[doc = "0: No FIFO flush"]
NOFLUSH = 0,
#[doc = "1: FIFO flush. Programming this bit to 1 triggers the FIFO Flush. All the internal FIFO pointers (read and write) are cleared"]
FLUSH = 1,
}
impl From<FFLUSH_AW> for bool {
#[inline(always)]
fn from(variant: FFLUSH_AW) -> Self {
variant as u8 != 0
}
}
#[doc = "Write proxy for field `FFLUSH`"]
pub struct FFLUSH_W<'a> {
w: &'a mut W,
}
impl<'a> FFLUSH_W<'a> {
#[doc = r"Writes `variant` to the field"]
#[inline(always)]
pub fn variant(self, variant: FFLUSH_AW) -> &'a mut W {
{
self.bit(variant.into())
}
}
#[doc = "No FIFO flush"]
#[inline(always)]
pub fn no_flush(self) -> &'a mut W {
self.variant(FFLUSH_AW::NOFLUSH)
}
#[doc = "FIFO flush. Programming this bit to 1 triggers the FIFO Flush. All the internal FIFO pointers (read and write) are cleared"]
#[inline(always)]
pub fn flush(self) -> &'a mut W {
self.variant(FFLUSH_AW::FLUSH)
}
#[doc = r"Sets the field bit"]
#[inline(always)]
pub fn set_bit(self) -> &'a mut W {
self.bit(true)
}
#[doc = r"Clears the field bit"]
#[inline(always)]
pub fn clear_bit(self) -> &'a mut W {
self.bit(false)
}
#[doc = r"Writes raw bits to the field"]
#[inline(always)]
pub fn bit(self, value: bool) -> &'a mut W {
self.w.bits = (self.w.bits & !(0x01 << 3)) | (((value as u32) & 0x01) << 3);
self.w
}
}
#[doc = "Reader of field `TRIS`"]
pub type TRIS_R = crate::R<bool, bool>;
#[doc = "Write proxy for field `TRIS`"]
pub struct TRIS_W<'a> {
w: &'a mut W,
}
impl<'a> TRIS_W<'a> {
#[doc = r"Sets the field bit"]
#[inline(always)]
pub fn set_bit(self) -> &'a mut W {
self.bit(true)
}
#[doc = r"Clears the field bit"]
#[inline(always)]
pub fn clear_bit(self) -> &'a mut W {
self.bit(false)
}
#[doc = r"Writes raw bits to the field"]
#[inline(always)]
pub fn bit(self, value: bool) -> &'a mut W {
self.w.bits = (self.w.bits & !(0x01 << 4)) | (((value as u32) & 0x01) << 4);
self.w
}
}
#[doc = "Mute. This bit is set and cleared by software. It is meaningful only when the audio block operates as a transmitter. The MUTE value is linked to value of MUTEVAL if the number of slots is lower or equal to 2, or equal to 0 if it is greater than 2. Refer to Section: Mute mode for more details. Note: This bit is meaningless and should not be used for SPDIF audio blocks.\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq)]
pub enum MUTE_A {
#[doc = "0: No mute mode"]
DISABLED = 0,
#[doc = "1: Mute mode enabled"]
ENABLED = 1,
}
impl From<MUTE_A> for bool {
#[inline(always)]
fn from(variant: MUTE_A) -> Self {
variant as u8 != 0
}
}
#[doc = "Reader of field `MUTE`"]
pub type MUTE_R = crate::R<bool, MUTE_A>;
impl MUTE_R {
#[doc = r"Get enumerated values variant"]
#[inline(always)]
pub fn variant(&self) -> MUTE_A {
match self.bits {
false => MUTE_A::DISABLED,
true => MUTE_A::ENABLED,
}
}
#[doc = "Checks if the value of the field is `DISABLED`"]
#[inline(always)]
pub fn is_disabled(&self) -> bool {
*self == MUTE_A::DISABLED
}
#[doc = "Checks if the value of the field is `ENABLED`"]
#[inline(always)]
pub fn is_enabled(&self) -> bool {
*self == MUTE_A::ENABLED
}
}
#[doc = "Write proxy for field `MUTE`"]
pub struct MUTE_W<'a> {
w: &'a mut W,
}
impl<'a> MUTE_W<'a> {
#[doc = r"Writes `variant` to the field"]
#[inline(always)]
pub fn variant(self, variant: MUTE_A) -> &'a mut W {
{
self.bit(variant.into())
}
}
#[doc = "No mute mode"]
#[inline(always)]
pub fn disabled(self) -> &'a mut W {
self.variant(MUTE_A::DISABLED)
}
#[doc = "Mute mode enabled"]
#[inline(always)]
pub fn enabled(self) -> &'a mut W {
self.variant(MUTE_A::ENABLED)
}
#[doc = r"Sets the field bit"]
#[inline(always)]
pub fn set_bit(self) -> &'a mut W {
self.bit(true)
}
#[doc = r"Clears the field bit"]
#[inline(always)]
pub fn clear_bit(self) -> &'a mut W {
self.bit(false)
}
#[doc = r"Writes raw bits to the field"]
#[inline(always)]
pub fn bit(self, value: bool) -> &'a mut W {
self.w.bits = (self.w.bits & !(0x01 << 5)) | (((value as u32) & 0x01) << 5);
self.w
}
}
#[doc = "Mute value. This bit is set and cleared by software.It must be written before enabling the audio block: SAIXEN. This bit is meaningful only when the audio block operates as a transmitter, the number of slots is lower or equal to 2 and the MUTE bit is set. If more slots are declared, the bit value sent during the transmission in mute mode is equal to 0, whatever the value of MUTEVAL. if the number of slot is lower or equal to 2 and MUTEVAL = 1, the MUTE value transmitted for each slot is the one sent during the previous frame. Refer to Section: Mute mode for more details. Note: This bit is meaningless and should not be used for SPDIF audio blocks.\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq)]
pub enum MUTEVAL_A {
#[doc = "0: Bit value 0 is sent during the mute mode"]
SENDZERO = 0,
#[doc = "1: Last values are sent during the mute mode"]
SENDLAST = 1,
}
impl From<MUTEVAL_A> for bool {
#[inline(always)]
fn from(variant: MUTEVAL_A) -> Self {
variant as u8 != 0
}
}
#[doc = "Reader of field `MUTEVAL`"]
pub type MUTEVAL_R = crate::R<bool, MUTEVAL_A>;
impl MUTEVAL_R {
#[doc = r"Get enumerated values variant"]
#[inline(always)]
pub fn variant(&self) -> MUTEVAL_A {
match self.bits {
false => MUTEVAL_A::SENDZERO,
true => MUTEVAL_A::SENDLAST,
}
}
#[doc = "Checks if the value of the field is `SENDZERO`"]
#[inline(always)]
pub fn is_send_zero(&self) -> bool {
*self == MUTEVAL_A::SENDZERO
}
#[doc = "Checks if the value of the field is `SENDLAST`"]
#[inline(always)]
pub fn is_send_last(&self) -> bool {
*self == MUTEVAL_A::SENDLAST
}
}
#[doc = "Write proxy for field `MUTEVAL`"]
pub struct MUTEVAL_W<'a> {
w: &'a mut W,
}
impl<'a> MUTEVAL_W<'a> {
#[doc = r"Writes `variant` to the field"]
#[inline(always)]
pub fn variant(self, variant: MUTEVAL_A) -> &'a mut W {
{
self.bit(variant.into())
}
}
#[doc = "Bit value 0 is sent during the mute mode"]
#[inline(always)]
pub fn send_zero(self) -> &'a mut W {
self.variant(MUTEVAL_A::SENDZERO)
}
#[doc = "Last values are sent during the mute mode"]
#[inline(always)]
pub fn send_last(self) -> &'a mut W {
self.variant(MUTEVAL_A::SENDLAST)
}
#[doc = r"Sets the field bit"]
#[inline(always)]
pub fn set_bit(self) -> &'a mut W {
self.bit(true)
}
#[doc = r"Clears the field bit"]
#[inline(always)]
pub fn clear_bit(self) -> &'a mut W {
self.bit(false)
}
#[doc = r"Writes raw bits to the field"]
#[inline(always)]
pub fn bit(self, value: bool) -> &'a mut W {
self.w.bits = (self.w.bits & !(0x01 << 6)) | (((value as u32) & 0x01) << 6);
self.w
}
}
#[doc = "Reader of field `MUTECNT`"]
pub type MUTECNT_R = crate::R<u8, u8>;
#[doc = "Write proxy for field `MUTECNT`"]
pub struct MUTECNT_W<'a> {
w: &'a mut W,
}
impl<'a> MUTECNT_W<'a> {
#[doc = r"Writes raw bits to the field"]
#[inline(always)]
pub unsafe fn bits(self, value: u8) -> &'a mut W {
self.w.bits = (self.w.bits & !(0x3f << 7)) | (((value as u32) & 0x3f) << 7);
self.w
}
}
#[doc = "Complement bit. This bit is set and cleared by software. It defines the type of complement to be used for companding mode Note: This bit has effect only when the companding mode is -Law algorithm or A-Law algorithm.\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq)]
pub enum CPL_A {
#[doc = "0: 1\u{2019}s complement representation"]
ONESCOMPLEMENT = 0,
#[doc = "1: 2\u{2019}s complement representation"]
TWOSCOMPLEMENT = 1,
}
impl From<CPL_A> for bool {
#[inline(always)]
fn from(variant: CPL_A) -> Self {
variant as u8 != 0
}
}
#[doc = "Reader of field `CPL`"]
pub type CPL_R = crate::R<bool, CPL_A>;
impl CPL_R {
#[doc = r"Get enumerated values variant"]
#[inline(always)]
pub fn variant(&self) -> CPL_A {
match self.bits {
false => CPL_A::ONESCOMPLEMENT,
true => CPL_A::TWOSCOMPLEMENT,
}
}
#[doc = "Checks if the value of the field is `ONESCOMPLEMENT`"]
#[inline(always)]
pub fn is_ones_complement(&self) -> bool {
*self == CPL_A::ONESCOMPLEMENT
}
#[doc = "Checks if the value of the field is `TWOSCOMPLEMENT`"]
#[inline(always)]
pub fn is_twos_complement(&self) -> bool {
*self == CPL_A::TWOSCOMPLEMENT
}
}
#[doc = "Write proxy for field `CPL`"]
pub struct CPL_W<'a> {
w: &'a mut W,
}
impl<'a> CPL_W<'a> {
#[doc = r"Writes `variant` to the field"]
#[inline(always)]
pub fn variant(self, variant: CPL_A) -> &'a mut W {
{
self.bit(variant.into())
}
}
#[doc = "1\u{2019}s complement representation"]
#[inline(always)]
pub fn ones_complement(self) -> &'a mut W {
self.variant(CPL_A::ONESCOMPLEMENT)
}
#[doc = "2\u{2019}s complement representation"]
#[inline(always)]
pub fn twos_complement(self) -> &'a mut W {
self.variant(CPL_A::TWOSCOMPLEMENT)
}
#[doc = r"Sets the field bit"]
#[inline(always)]
pub fn set_bit(self) -> &'a mut W {
self.bit(true)
}
#[doc = r"Clears the field bit"]
#[inline(always)]
pub fn clear_bit(self) -> &'a mut W {
self.bit(false)
}
#[doc = r"Writes raw bits to the field"]
#[inline(always)]
pub fn bit(self, value: bool) -> &'a mut W {
self.w.bits = (self.w.bits & !(0x01 << 13)) | (((value as u32) & 0x01) << 13);
self.w
}
}
#[doc = "Companding mode. These bits are set and cleared by software. The -Law and the A-Law log are a part of the CCITT G.711 recommendation, the type of complement that will be used depends on CPL bit. The data expansion or data compression are determined by the state of bit MODE\\[0\\]. The data compression is applied if the audio block is configured as a transmitter. The data expansion is automatically applied when the audio block is configured as a receiver. Refer to Section: Companding mode for more details. Note: Companding mode is applicable only when TDM is selected.\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq)]
#[repr(u8)]
pub enum COMP_A {
#[doc = "0: No companding algorithm"]
NOCOMPANDING = 0,
#[doc = "2: \u{3bc}-Law algorithm"]
MULAW = 2,
#[doc = "3: A-Law algorithm"]
ALAW = 3,
}
impl From<COMP_A> for u8 {
#[inline(always)]
fn from(variant: COMP_A) -> Self {
variant as _
}
}
#[doc = "Reader of field `COMP`"]
pub type COMP_R = crate::R<u8, COMP_A>;
impl COMP_R {
#[doc = r"Get enumerated values variant"]
#[inline(always)]
pub fn variant(&self) -> crate::Variant<u8, COMP_A> {
use crate::Variant::*;
match self.bits {
0 => Val(COMP_A::NOCOMPANDING),
2 => Val(COMP_A::MULAW),
3 => Val(COMP_A::ALAW),
i => Res(i),
}
}
#[doc = "Checks if the value of the field is `NOCOMPANDING`"]
#[inline(always)]
pub fn is_no_companding(&self) -> bool {
*self == COMP_A::NOCOMPANDING
}
#[doc = "Checks if the value of the field is `MULAW`"]
#[inline(always)]
pub fn is_mu_law(&self) -> bool {
*self == COMP_A::MULAW
}
#[doc = "Checks if the value of the field is `ALAW`"]
#[inline(always)]
pub fn is_alaw(&self) -> bool {
*self == COMP_A::ALAW
}
}
#[doc = "Write proxy for field `COMP`"]
pub struct COMP_W<'a> {
w: &'a mut W,
}
impl<'a> COMP_W<'a> {
#[doc = r"Writes `variant` to the field"]
#[inline(always)]
pub fn variant(self, variant: COMP_A) -> &'a mut W {
unsafe { self.bits(variant.into()) }
}
#[doc = "No companding algorithm"]
#[inline(always)]
pub fn no_companding(self) -> &'a mut W {
self.variant(COMP_A::NOCOMPANDING)
}
#[doc = "\u{3bc}-Law algorithm"]
#[inline(always)]
pub fn mu_law(self) -> &'a mut W {
self.variant(COMP_A::MULAW)
}
#[doc = "A-Law algorithm"]
#[inline(always)]
pub fn alaw(self) -> &'a mut W {
self.variant(COMP_A::ALAW)
}
#[doc = r"Writes raw bits to the field"]
#[inline(always)]
pub unsafe fn bits(self, value: u8) -> &'a mut W {
self.w.bits = (self.w.bits & !(0x03 << 14)) | (((value as u32) & 0x03) << 14);
self.w
}
}
impl R {
#[doc = "Bits 0:2 - FIFO threshold. This bit is set and cleared by software."]
#[inline(always)]
pub fn fth(&self) -> FTH_R {
FTH_R::new((self.bits & 0x07) as u8)
}
#[doc = "Bit 4 - Tristate management on data line. This bit is set and cleared by software. It is meaningful only if the audio block is configured as a transmitter. This bit is not used when the audio block is configured in SPDIF mode. It should be configured when SAI is disabled. Refer to Section: Output data line management on an inactive slot for more details."]
#[inline(always)]
pub fn tris(&self) -> TRIS_R {
TRIS_R::new(((self.bits >> 4) & 0x01) != 0)
}
#[doc = "Bit 5 - Mute. This bit is set and cleared by software. It is meaningful only when the audio block operates as a transmitter. The MUTE value is linked to value of MUTEVAL if the number of slots is lower or equal to 2, or equal to 0 if it is greater than 2. Refer to Section: Mute mode for more details. Note: This bit is meaningless and should not be used for SPDIF audio blocks."]
#[inline(always)]
pub fn mute(&self) -> MUTE_R {
MUTE_R::new(((self.bits >> 5) & 0x01) != 0)
}
#[doc = "Bit 6 - Mute value. This bit is set and cleared by software.It must be written before enabling the audio block: SAIXEN. This bit is meaningful only when the audio block operates as a transmitter, the number of slots is lower or equal to 2 and the MUTE bit is set. If more slots are declared, the bit value sent during the transmission in mute mode is equal to 0, whatever the value of MUTEVAL. if the number of slot is lower or equal to 2 and MUTEVAL = 1, the MUTE value transmitted for each slot is the one sent during the previous frame. Refer to Section: Mute mode for more details. Note: This bit is meaningless and should not be used for SPDIF audio blocks."]
#[inline(always)]
pub fn muteval(&self) -> MUTEVAL_R {
MUTEVAL_R::new(((self.bits >> 6) & 0x01) != 0)
}
#[doc = "Bits 7:12 - Mute counter. These bits are set and cleared by software. They are used only in reception mode. The value set in these bits is compared to the number of consecutive mute frames detected in reception. When the number of mute frames is equal to this value, the flag MUTEDET will be set and an interrupt will be generated if bit MUTEDETIE is set. Refer to Section: Mute mode for more details."]
#[inline(always)]
pub fn mutecnt(&self) -> MUTECNT_R {
MUTECNT_R::new(((self.bits >> 7) & 0x3f) as u8)
}
#[doc = "Bit 13 - Complement bit. This bit is set and cleared by software. It defines the type of complement to be used for companding mode Note: This bit has effect only when the companding mode is -Law algorithm or A-Law algorithm."]
#[inline(always)]
pub fn cpl(&self) -> CPL_R {
CPL_R::new(((self.bits >> 13) & 0x01) != 0)
}
#[doc = "Bits 14:15 - Companding mode. These bits are set and cleared by software. The -Law and the A-Law log are a part of the CCITT G.711 recommendation, the type of complement that will be used depends on CPL bit. The data expansion or data compression are determined by the state of bit MODE\\[0\\]. The data compression is applied if the audio block is configured as a transmitter. The data expansion is automatically applied when the audio block is configured as a receiver. Refer to Section: Companding mode for more details. Note: Companding mode is applicable only when TDM is selected."]
#[inline(always)]
pub fn comp(&self) -> COMP_R {
COMP_R::new(((self.bits >> 14) & 0x03) as u8)
}
}
impl W {
#[doc = "Bits 0:2 - FIFO threshold. This bit is set and cleared by software."]
#[inline(always)]
pub fn fth(&mut self) -> FTH_W {
FTH_W { w: self }
}
#[doc = "Bit 3 - FIFO flush. This bit is set by software. It is always read as 0. This bit should be configured when the SAI is disabled."]
#[inline(always)]
pub fn fflush(&mut self) -> FFLUSH_W {
FFLUSH_W { w: self }
}
#[doc = "Bit 4 - Tristate management on data line. This bit is set and cleared by software. It is meaningful only if the audio block is configured as a transmitter. This bit is not used when the audio block is configured in SPDIF mode. It should be configured when SAI is disabled. Refer to Section: Output data line management on an inactive slot for more details."]
#[inline(always)]
pub fn tris(&mut self) -> TRIS_W {
TRIS_W { w: self }
}
#[doc = "Bit 5 - Mute. This bit is set and cleared by software. It is meaningful only when the audio block operates as a transmitter. The MUTE value is linked to value of MUTEVAL if the number of slots is lower or equal to 2, or equal to 0 if it is greater than 2. Refer to Section: Mute mode for more details. Note: This bit is meaningless and should not be used for SPDIF audio blocks."]
#[inline(always)]
pub fn mute(&mut self) -> MUTE_W {
MUTE_W { w: self }
}
#[doc = "Bit 6 - Mute value. This bit is set and cleared by software.It must be written before enabling the audio block: SAIXEN. This bit is meaningful only when the audio block operates as a transmitter, the number of slots is lower or equal to 2 and the MUTE bit is set. If more slots are declared, the bit value sent during the transmission in mute mode is equal to 0, whatever the value of MUTEVAL. if the number of slot is lower or equal to 2 and MUTEVAL = 1, the MUTE value transmitted for each slot is the one sent during the previous frame. Refer to Section: Mute mode for more details. Note: This bit is meaningless and should not be used for SPDIF audio blocks."]
#[inline(always)]
pub fn muteval(&mut self) -> MUTEVAL_W {
MUTEVAL_W { w: self }
}
#[doc = "Bits 7:12 - Mute counter. These bits are set and cleared by software. They are used only in reception mode. The value set in these bits is compared to the number of consecutive mute frames detected in reception. When the number of mute frames is equal to this value, the flag MUTEDET will be set and an interrupt will be generated if bit MUTEDETIE is set. Refer to Section: Mute mode for more details."]
#[inline(always)]
pub fn mutecnt(&mut self) -> MUTECNT_W {
MUTECNT_W { w: self }
}
#[doc = "Bit 13 - Complement bit. This bit is set and cleared by software. It defines the type of complement to be used for companding mode Note: This bit has effect only when the companding mode is -Law algorithm or A-Law algorithm."]
#[inline(always)]
pub fn cpl(&mut self) -> CPL_W {
CPL_W { w: self }
}
#[doc = "Bits 14:15 - Companding mode. These bits are set and cleared by software. The -Law and the A-Law log are a part of the CCITT G.711 recommendation, the type of complement that will be used depends on CPL bit. The data expansion or data compression are determined by the state of bit MODE\\[0\\]. The data compression is applied if the audio block is configured as a transmitter. The data expansion is automatically applied when the audio block is configured as a receiver. Refer to Section: Companding mode for more details. Note: Companding mode is applicable only when TDM is selected."]
#[inline(always)]
pub fn comp(&mut self) -> COMP_W {
COMP_W { w: self }
}
}