Module dac_cr 

DAC control register

Structs

CEN1_R

Field CEN1 reader - DAC Channel 1 calibration enable This bit is set and cleared by software to enable/disable DAC channel 1 calibration, it can be written only if bit EN1=0 into DAC_CR (the calibration mode can be entered/exit only when the DAC channel is disabled) Otherwise, the write operation is ignored.

CEN1_W

Field CEN1 writer - DAC Channel 1 calibration enable This bit is set and cleared by software to enable/disable DAC channel 1 calibration, it can be written only if bit EN1=0 into DAC_CR (the calibration mode can be entered/exit only when the DAC channel is disabled) Otherwise, the write operation is ignored.

CEN2_R

Field CEN2 reader - DAC Channel 2 calibration enable This bit is set and cleared by software to enable/disable DAC channel 2 calibration, it can be written only if bit EN2=0 into DAC_CR (the calibration mode can be entered/exit only when the DAC channel is disabled) Otherwise, the write operation is ignored.

CEN2_W

Field CEN2 writer - DAC Channel 2 calibration enable This bit is set and cleared by software to enable/disable DAC channel 2 calibration, it can be written only if bit EN2=0 into DAC_CR (the calibration mode can be entered/exit only when the DAC channel is disabled) Otherwise, the write operation is ignored.

DAC_CR_SPEC

DAC control register

DMAEN1_R

Field DMAEN1 reader - DAC channel1 DMA enable This bit is set and cleared by software.

DMAEN1_W

Field DMAEN1 writer - DAC channel1 DMA enable This bit is set and cleared by software.

DMAEN2_R

Field DMAEN2 reader - DAC channel2 DMA enable This bit is set and cleared by software.

DMAEN2_W

Field DMAEN2 writer - DAC channel2 DMA enable This bit is set and cleared by software.

DMAUDRIE1_R

Field DMAUDRIE1 reader - DAC channel1 DMA Underrun Interrupt enable This bit is set and cleared by software.

DMAUDRIE1_W

Field DMAUDRIE1 writer - DAC channel1 DMA Underrun Interrupt enable This bit is set and cleared by software.

DMAUDRIE2_R

Field DMAUDRIE2 reader - DAC channel2 DMA underrun interrupt enable This bit is set and cleared by software.

DMAUDRIE2_W

Field DMAUDRIE2 writer - DAC channel2 DMA underrun interrupt enable This bit is set and cleared by software.

EN1_R

Field EN1 reader - DAC channel1 enable This bit is set and cleared by software to enable/disable DAC channel1.

EN1_W

Field EN1 writer - DAC channel1 enable This bit is set and cleared by software to enable/disable DAC channel1.

EN2_R

Field EN2 reader - DAC channel2 enable This bit is set and cleared by software to enable/disable DAC channel2.

EN2_W

Field EN2 writer - DAC channel2 enable This bit is set and cleared by software to enable/disable DAC channel2.

MAMP1_R

Field MAMP1 reader - DAC channel1 mask/amplitude selector These bits are written by software to select mask in wave generation mode or amplitude in triangle generation mode. = 1011: Unmask bits[11:0] of LFSR/ triangle amplitude equal to 4095

MAMP1_W

Field MAMP1 writer - DAC channel1 mask/amplitude selector These bits are written by software to select mask in wave generation mode or amplitude in triangle generation mode. = 1011: Unmask bits[11:0] of LFSR/ triangle amplitude equal to 4095

MAMP2_R

Field MAMP2 reader - DAC channel2 mask/amplitude selector These bits are written by software to select mask in wave generation mode or amplitude in triangle generation mode. = 1011: Unmask bits[11:0] of LFSR/ triangle amplitude equal to 4095

MAMP2_W

Field MAMP2 writer - DAC channel2 mask/amplitude selector These bits are written by software to select mask in wave generation mode or amplitude in triangle generation mode. = 1011: Unmask bits[11:0] of LFSR/ triangle amplitude equal to 4095

R

Register DAC_CR reader

TEN1_R

Field TEN1 reader - DAC channel1 trigger enable

TEN1_W

Field TEN1 writer - DAC channel1 trigger enable

TEN2_R

Field TEN2 reader - DAC channel2 trigger enable

TEN2_W

Field TEN2 writer - DAC channel2 trigger enable

TSEL1_R

Field TSEL1 reader - DAC channel1 trigger selection These bits select the external event used to trigger DAC channel1. Note: Only used if bit TEN1 = 1 (DAC channel1 trigger enabled).

TSEL1_W

Field TSEL1 writer - DAC channel1 trigger selection These bits select the external event used to trigger DAC channel1. Note: Only used if bit TEN1 = 1 (DAC channel1 trigger enabled).

TSEL2_R

Field TSEL2 reader - DAC channel2 trigger selection These bits select the external event used to trigger DAC channel2 Note: Only used if bit TEN2 = 1 (DAC channel2 trigger enabled).

TSEL2_W

Field TSEL2 writer - DAC channel2 trigger selection These bits select the external event used to trigger DAC channel2 Note: Only used if bit TEN2 = 1 (DAC channel2 trigger enabled).

W

Register DAC_CR writer

WAVE1_R

Field WAVE1 reader - DAC channel1 noise/triangle wave generation enable These bits are set and cleared by software. Note: Only used if bit TEN1 = 1 (DAC channel1 trigger enabled).

WAVE1_W

Field WAVE1 writer - DAC channel1 noise/triangle wave generation enable These bits are set and cleared by software. Note: Only used if bit TEN1 = 1 (DAC channel1 trigger enabled).

WAVE2_R

Field WAVE2 reader - DAC channel2 noise/triangle wave generation enable These bits are set/reset by software. 1x: Triangle wave generation enabled Note: Only used if bit TEN2 = 1 (DAC channel2 trigger enabled)

WAVE2_W

Field WAVE2 writer - DAC channel2 noise/triangle wave generation enable These bits are set/reset by software. 1x: Triangle wave generation enabled Note: Only used if bit TEN2 = 1 (DAC channel2 trigger enabled)