pub type DTOGTX_W<'a, const O: u8> = BitWriter<'a, u32, CHEP3R_SPEC, bool, O>;Expand description
Field DTOGTX writer - Data Toggle, for transmission transfers If the endpoint/channel is non-isochronous, this bit contains the required value of the data toggle bit (0=DATA0, 1=DATA1) for the next data packet to be transmitted. Hardware toggles this bit when the ACK handshake is received from the USB host, following a data packet transmission. If the endpoint/channel is defined as a control one, hardware sets this bit to 1 at the reception of a SETUP PID addressed to this endpoint. If the endpoint/channel is using the double buffer feature, this bit is used to support packet buffer swapping too (Refer to ) If the endpoint/channel is Isochronous, this bit is used to support packet buffer swapping since no data toggling is used for this sort of endpoints and only DATA0 packet are transmitted (Refer to ). Hardware toggles this bit just after the end of data packet transmission, since no handshake is used for Isochronous transfers. This bit can also be toggled by the software to initialize its value (mandatory when the endpoint/channel is not a control one) or to force a specific data toggle/packet buffer usage. When the application software writes ’0, the value of DTOGTX remains unchanged, while writing ’1 makes the bit value toggle. This bit is read/write but it can only be toggled by writing 1.