Expand description
FDCAN data bit timing and prescaler register
Structs
Type Definitions
Field DBRP reader - Data bit rate prescaler The value by which the oscillator frequency is divided to generate the bit time quanta. The bit time is built up from a multiple of this quanta. Valid values for the Baud Rate Prescaler are 0 to 31. The hardware interpreters this value as the value programmed plus 1.
Field DBRP writer - Data bit rate prescaler The value by which the oscillator frequency is divided to generate the bit time quanta. The bit time is built up from a multiple of this quanta. Valid values for the Baud Rate Prescaler are 0 to 31. The hardware interpreters this value as the value programmed plus 1.
Field DSJW reader - Synchronization jump width Must always be smaller than DTSEG2, valid values are 0 to 15. The value used by the hardware is the one programmed, incremented by 1: tSJW = (DSJW + 1) x tq.
Field DSJW writer - Synchronization jump width Must always be smaller than DTSEG2, valid values are 0 to 15. The value used by the hardware is the one programmed, incremented by 1: tSJW = (DSJW + 1) x tq.
Field DTSEG1 reader - Data time segment before sample point Valid values are 0 to 31. The value used by the hardware is the one programmed, incremented by 1, i.e. tBS1 = (DTSEG1 + 1) x tq.
Field DTSEG1 writer - Data time segment before sample point Valid values are 0 to 31. The value used by the hardware is the one programmed, incremented by 1, i.e. tBS1 = (DTSEG1 + 1) x tq.
Field DTSEG2 reader - Data time segment after sample point Valid values are 0 to 15. The value used by the hardware is the one programmed, incremented by 1, i.e. tBS2 = (DTSEG2 + 1) x tq.
Field DTSEG2 writer - Data time segment after sample point Valid values are 0 to 15. The value used by the hardware is the one programmed, incremented by 1, i.e. tBS2 = (DTSEG2 + 1) x tq.
Field TDC reader - Transceiver delay compensation
Field TDC writer - Transceiver delay compensation