Expand description
AES status register
Structs
Type Definitions
Field BUSY
reader - Busy This flag indicates whether AES is idle or busy during GCM payload encryption phase: When the flag indicates “idle”, the current GCM encryption processing may be suspended to process a higher-priority message. In other chaining modes, or in GCM phases other than payload encryption, the flag must be ignored for the suspend process.
Field CCF
reader - Computation completed flag This flag indicates whether the computation is completed: The flag is set by hardware upon the completion of the computation. It is cleared by software, upon setting the CCFC bit of the AES_CR register. Upon the flag setting, an interrupt is generated if enabled through the CCFIE bit of the AES_CR register. The flag is significant only when the DMAOUTEN bit is 0. It may stay high when DMA_EN is 1.
Field RDERR
reader - Read error flag This flag indicates the detection of an unexpected read operation from the AES_DOUTR register (during computation or data input phase): The flag is set by hardware. It is cleared by software upon setting the ERRC bit of the AES_CR register. Upon the flag setting, an interrupt is generated if enabled through the ERRIE bit of the AES_CR register. The flag setting has no impact on the AES operation. Unexpected read returns zero.
Field WRERR
reader - Write error This flag indicates the detection of an unexpected write operation to the AES_DINR register (during computation or data output phase): The flag is set by hardware. It is cleared by software upon setting the ERRC bit of the AES_CR register. Upon the flag setting, an interrupt is generated if enabled through the ERRIE bit of the AES_CR register. The flag setting has no impact on the AES operation. Unexpected write is ignored.