Module stm32g0::stm32g0b0::tim16::ccmr1_input

source · [−]
Expand description

capture/compare mode register 1 (input mode)

Structs

CCMR1_INPUT_SPEC

capture/compare mode register 1 (input mode)

R

Register CCMR1_Input reader

W

Register CCMR1_Input writer

Type Definitions

CC1S_R

Field CC1S reader - Capture/Compare 1 Selection This bit-field defines the direction of the channel (input/output) as well as the used input. Others: Reserved Note: CC1S bits are writable only when the channel is OFF (CC1E = ’0’ in TIMx_CCER).

CC1S_W

Field CC1S writer - Capture/Compare 1 Selection This bit-field defines the direction of the channel (input/output) as well as the used input. Others: Reserved Note: CC1S bits are writable only when the channel is OFF (CC1E = ’0’ in TIMx_CCER).

IC1F_R

Field IC1F reader - Input capture 1 filter This bit-field defines the frequency used to sample TI1 input and the length of the digital filter applied to TI1. The digital filter is made of an event counter in which N consecutive events are needed to validate a transition on the output:

IC1F_W

Field IC1F writer - Input capture 1 filter This bit-field defines the frequency used to sample TI1 input and the length of the digital filter applied to TI1. The digital filter is made of an event counter in which N consecutive events are needed to validate a transition on the output:

IC1PSC_R

Field IC1PSC reader - Input capture 1 prescaler This bit-field defines the ratio of the prescaler acting on CC1 input (IC1). The prescaler is reset as soon as CC1E=’0’ (TIMx_CCER register).

IC1PSC_W

Field IC1PSC writer - Input capture 1 prescaler This bit-field defines the ratio of the prescaler acting on CC1 input (IC1). The prescaler is reset as soon as CC1E=’0’ (TIMx_CCER register).