Expand description
control register 2
Structs
Type Definitions
Field CCDS
reader - Capture/compare DMA selection
Field CCDS
writer - Capture/compare DMA selection
Field CCPC
reader - Capture/compare preloaded control Note: This bit acts only on channels that have a complementary output.
Field CCPC
writer - Capture/compare preloaded control Note: This bit acts only on channels that have a complementary output.
Field CCUS
reader - Capture/compare control update selection Note: This bit acts only on channels that have a complementary output.
Field CCUS
writer - Capture/compare control update selection Note: This bit acts only on channels that have a complementary output.
Field MMS
reader - Master mode selection These bits allow to select the information to be sent in master mode to slave timers for synchronization (TRGO). The combination is as follows:
Field MMS
writer - Master mode selection These bits allow to select the information to be sent in master mode to slave timers for synchronization (TRGO). The combination is as follows:
Field OIS1N
reader - Output Idle state 1 (OC1N output) Note: This bit can not be modified as long as LOCK level 1, 2 or 3 has been programmed (LOCK bits in TIM15_BDTR register).
Field OIS1N
writer - Output Idle state 1 (OC1N output) Note: This bit can not be modified as long as LOCK level 1, 2 or 3 has been programmed (LOCK bits in TIM15_BDTR register).
Field OIS1
reader - Output Idle state 1 (OC1 output) Note: This bit can not be modified as long as LOCK level 1, 2 or 3 has been programmed (LOCK bits in TIM15_BDTR register).
Field OIS1
writer - Output Idle state 1 (OC1 output) Note: This bit can not be modified as long as LOCK level 1, 2 or 3 has been programmed (LOCK bits in TIM15_BDTR register).
Field OIS2
reader - Output idle state 2 (OC2 output) Note: This bit cannot be modified as long as LOCK level 1, 2 or 3 has been programmed (LOCK bits in the TIM15_BDTR register).
Field OIS2
writer - Output idle state 2 (OC2 output) Note: This bit cannot be modified as long as LOCK level 1, 2 or 3 has been programmed (LOCK bits in the TIM15_BDTR register).
Field TI1S
reader - TI1 selection
Field TI1S
writer - TI1 selection