1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122

#[doc = "Register `CCER` reader"]
pub struct R(crate::R<CCER_SPEC>);
impl core::ops::Deref for R {
    type Target = crate::R<CCER_SPEC>;
    #[inline(always)]
    fn deref(&self) -> &Self::Target {
        &self.0
    }
}
impl From<crate::R<CCER_SPEC>> for R {
    #[inline(always)]
    fn from(reader: crate::R<CCER_SPEC>) -> Self {
        R(reader)
    }
}
#[doc = "Register `CCER` writer"]
pub struct W(crate::W<CCER_SPEC>);
impl core::ops::Deref for W {
    type Target = crate::W<CCER_SPEC>;
    #[inline(always)]
    fn deref(&self) -> &Self::Target {
        &self.0
    }
}
impl core::ops::DerefMut for W {
    #[inline(always)]
    fn deref_mut(&mut self) -> &mut Self::Target {
        &mut self.0
    }
}
impl From<crate::W<CCER_SPEC>> for W {
    #[inline(always)]
    fn from(writer: crate::W<CCER_SPEC>) -> Self {
        W(writer)
    }
}
#[doc = "Field `CC1E` reader - Capture/Compare 1 output enable When CC1 channel is configured as output, the OC1 level depends on MOE, OSSI, OSSR, OIS1, OIS1N and CC1NE bits, regardless of the CC1E bits state. Refer to for details."]
pub type CC1E_R = crate::BitReader<bool>;
#[doc = "Field `CC1E` writer - Capture/Compare 1 output enable When CC1 channel is configured as output, the OC1 level depends on MOE, OSSI, OSSR, OIS1, OIS1N and CC1NE bits, regardless of the CC1E bits state. Refer to for details."]
pub type CC1E_W<'a, const O: u8> = crate::BitWriter<'a, u32, CCER_SPEC, bool, O>;
#[doc = "Field `CC1P` reader - Capture/Compare 1 output polarity When CC1 channel is configured as input, both CC1NP/CC1P bits select the active polarity of TI1FP1 and TI2FP1 for trigger or capture operations. CC1NP=0, CC1P=0: non-inverted/rising edge. The circuit is sensitive to TIxFP1 rising edge (capture or trigger operations in reset, external clock or trigger mode), TIxFP1 is not inverted (trigger operation in gated mode or encoder mode). CC1NP=0, CC1P=1: inverted/falling edge. The circuit is sensitive to TIxFP1 falling edge (capture or trigger operations in reset, external clock or trigger mode), TIxFP1 is inverted (trigger operation in gated mode or encoder mode). CC1NP=1, CC1P=1: non-inverted/both edges/ The circuit is sensitive to both TIxFP1 rising and falling edges (capture or trigger operations in reset, external clock or trigger mode), TIxFP1is not inverted (trigger operation in gated mode). This configuration must not be used in encoder mode. CC1NP=1, CC1P=0: this configuration is reserved, it must not be used. Note: This bit is not writable as soon as LOCK level 2 or 3 has been programmed (LOCK bits in TIMx_BDTR register). On channels that have a complementary output, this bit is preloaded. If the CCPC bit is set in the TIMx_CR2 register then the CC1P active bit takes the new value from the preloaded bit only when a Commutation event is generated."]
pub type CC1P_R = crate::BitReader<bool>;
#[doc = "Field `CC1P` writer - Capture/Compare 1 output polarity When CC1 channel is configured as input, both CC1NP/CC1P bits select the active polarity of TI1FP1 and TI2FP1 for trigger or capture operations. CC1NP=0, CC1P=0: non-inverted/rising edge. The circuit is sensitive to TIxFP1 rising edge (capture or trigger operations in reset, external clock or trigger mode), TIxFP1 is not inverted (trigger operation in gated mode or encoder mode). CC1NP=0, CC1P=1: inverted/falling edge. The circuit is sensitive to TIxFP1 falling edge (capture or trigger operations in reset, external clock or trigger mode), TIxFP1 is inverted (trigger operation in gated mode or encoder mode). CC1NP=1, CC1P=1: non-inverted/both edges/ The circuit is sensitive to both TIxFP1 rising and falling edges (capture or trigger operations in reset, external clock or trigger mode), TIxFP1is not inverted (trigger operation in gated mode). This configuration must not be used in encoder mode. CC1NP=1, CC1P=0: this configuration is reserved, it must not be used. Note: This bit is not writable as soon as LOCK level 2 or 3 has been programmed (LOCK bits in TIMx_BDTR register). On channels that have a complementary output, this bit is preloaded. If the CCPC bit is set in the TIMx_CR2 register then the CC1P active bit takes the new value from the preloaded bit only when a Commutation event is generated."]
pub type CC1P_W<'a, const O: u8> = crate::BitWriter<'a, u32, CCER_SPEC, bool, O>;
#[doc = "Field `CC1NE` reader - Capture/Compare 1 complementary output enable"]
pub type CC1NE_R = crate::BitReader<bool>;
#[doc = "Field `CC1NE` writer - Capture/Compare 1 complementary output enable"]
pub type CC1NE_W<'a, const O: u8> = crate::BitWriter<'a, u32, CCER_SPEC, bool, O>;
#[doc = "Field `CC1NP` reader - Capture/Compare 1 complementary output polarity CC1 channel configured as output: CC1 channel configured as input: This bit is used in conjunction with CC1P to define the polarity of TI1FP1 and TI2FP1. Refer to the description of CC1P. Note: This bit is not writable as soon as LOCK level 2 or 3 has been programmed (LOCK bits in TIMx_BDTR register) and CC1S=â\u{80}\u{9d}00â\u{80}\u{9d} (the channel is configured in output). On channels that have a complementary output, this bit is preloaded. If the CCPC bit is set in the TIMx_CR2 register then the CC1NP active bit takes the new value from the preloaded bit only when a commutation event is generated."]
pub type CC1NP_R = crate::BitReader<bool>;
#[doc = "Field `CC1NP` writer - Capture/Compare 1 complementary output polarity CC1 channel configured as output: CC1 channel configured as input: This bit is used in conjunction with CC1P to define the polarity of TI1FP1 and TI2FP1. Refer to the description of CC1P. Note: This bit is not writable as soon as LOCK level 2 or 3 has been programmed (LOCK bits in TIMx_BDTR register) and CC1S=â\u{80}\u{9d}00â\u{80}\u{9d} (the channel is configured in output). On channels that have a complementary output, this bit is preloaded. If the CCPC bit is set in the TIMx_CR2 register then the CC1NP active bit takes the new value from the preloaded bit only when a commutation event is generated."]
pub type CC1NP_W<'a, const O: u8> = crate::BitWriter<'a, u32, CCER_SPEC, bool, O>;
impl R {
    #[doc = "Bit 0 - Capture/Compare 1 output enable When CC1 channel is configured as output, the OC1 level depends on MOE, OSSI, OSSR, OIS1, OIS1N and CC1NE bits, regardless of the CC1E bits state. Refer to for details."]
    #[inline(always)]
    pub fn cc1e(&self) -> CC1E_R {
        CC1E_R::new((self.bits & 1) != 0)
    }
    #[doc = "Bit 1 - Capture/Compare 1 output polarity When CC1 channel is configured as input, both CC1NP/CC1P bits select the active polarity of TI1FP1 and TI2FP1 for trigger or capture operations. CC1NP=0, CC1P=0: non-inverted/rising edge. The circuit is sensitive to TIxFP1 rising edge (capture or trigger operations in reset, external clock or trigger mode), TIxFP1 is not inverted (trigger operation in gated mode or encoder mode). CC1NP=0, CC1P=1: inverted/falling edge. The circuit is sensitive to TIxFP1 falling edge (capture or trigger operations in reset, external clock or trigger mode), TIxFP1 is inverted (trigger operation in gated mode or encoder mode). CC1NP=1, CC1P=1: non-inverted/both edges/ The circuit is sensitive to both TIxFP1 rising and falling edges (capture or trigger operations in reset, external clock or trigger mode), TIxFP1is not inverted (trigger operation in gated mode). This configuration must not be used in encoder mode. CC1NP=1, CC1P=0: this configuration is reserved, it must not be used. Note: This bit is not writable as soon as LOCK level 2 or 3 has been programmed (LOCK bits in TIMx_BDTR register). On channels that have a complementary output, this bit is preloaded. If the CCPC bit is set in the TIMx_CR2 register then the CC1P active bit takes the new value from the preloaded bit only when a Commutation event is generated."]
    #[inline(always)]
    pub fn cc1p(&self) -> CC1P_R {
        CC1P_R::new(((self.bits >> 1) & 1) != 0)
    }
    #[doc = "Bit 2 - Capture/Compare 1 complementary output enable"]
    #[inline(always)]
    pub fn cc1ne(&self) -> CC1NE_R {
        CC1NE_R::new(((self.bits >> 2) & 1) != 0)
    }
    #[doc = "Bit 3 - Capture/Compare 1 complementary output polarity CC1 channel configured as output: CC1 channel configured as input: This bit is used in conjunction with CC1P to define the polarity of TI1FP1 and TI2FP1. Refer to the description of CC1P. Note: This bit is not writable as soon as LOCK level 2 or 3 has been programmed (LOCK bits in TIMx_BDTR register) and CC1S=â\u{80}\u{9d}00â\u{80}\u{9d} (the channel is configured in output). On channels that have a complementary output, this bit is preloaded. If the CCPC bit is set in the TIMx_CR2 register then the CC1NP active bit takes the new value from the preloaded bit only when a commutation event is generated."]
    #[inline(always)]
    pub fn cc1np(&self) -> CC1NP_R {
        CC1NP_R::new(((self.bits >> 3) & 1) != 0)
    }
}
impl W {
    #[doc = "Bit 0 - Capture/Compare 1 output enable When CC1 channel is configured as output, the OC1 level depends on MOE, OSSI, OSSR, OIS1, OIS1N and CC1NE bits, regardless of the CC1E bits state. Refer to for details."]
    #[inline(always)]
    pub fn cc1e(&mut self) -> CC1E_W<0> {
        CC1E_W::new(self)
    }
    #[doc = "Bit 1 - Capture/Compare 1 output polarity When CC1 channel is configured as input, both CC1NP/CC1P bits select the active polarity of TI1FP1 and TI2FP1 for trigger or capture operations. CC1NP=0, CC1P=0: non-inverted/rising edge. The circuit is sensitive to TIxFP1 rising edge (capture or trigger operations in reset, external clock or trigger mode), TIxFP1 is not inverted (trigger operation in gated mode or encoder mode). CC1NP=0, CC1P=1: inverted/falling edge. The circuit is sensitive to TIxFP1 falling edge (capture or trigger operations in reset, external clock or trigger mode), TIxFP1 is inverted (trigger operation in gated mode or encoder mode). CC1NP=1, CC1P=1: non-inverted/both edges/ The circuit is sensitive to both TIxFP1 rising and falling edges (capture or trigger operations in reset, external clock or trigger mode), TIxFP1is not inverted (trigger operation in gated mode). This configuration must not be used in encoder mode. CC1NP=1, CC1P=0: this configuration is reserved, it must not be used. Note: This bit is not writable as soon as LOCK level 2 or 3 has been programmed (LOCK bits in TIMx_BDTR register). On channels that have a complementary output, this bit is preloaded. If the CCPC bit is set in the TIMx_CR2 register then the CC1P active bit takes the new value from the preloaded bit only when a Commutation event is generated."]
    #[inline(always)]
    pub fn cc1p(&mut self) -> CC1P_W<1> {
        CC1P_W::new(self)
    }
    #[doc = "Bit 2 - Capture/Compare 1 complementary output enable"]
    #[inline(always)]
    pub fn cc1ne(&mut self) -> CC1NE_W<2> {
        CC1NE_W::new(self)
    }
    #[doc = "Bit 3 - Capture/Compare 1 complementary output polarity CC1 channel configured as output: CC1 channel configured as input: This bit is used in conjunction with CC1P to define the polarity of TI1FP1 and TI2FP1. Refer to the description of CC1P. Note: This bit is not writable as soon as LOCK level 2 or 3 has been programmed (LOCK bits in TIMx_BDTR register) and CC1S=â\u{80}\u{9d}00â\u{80}\u{9d} (the channel is configured in output). On channels that have a complementary output, this bit is preloaded. If the CCPC bit is set in the TIMx_CR2 register then the CC1NP active bit takes the new value from the preloaded bit only when a commutation event is generated."]
    #[inline(always)]
    pub fn cc1np(&mut self) -> CC1NP_W<3> {
        CC1NP_W::new(self)
    }
    #[doc = "Writes raw bits to the register."]
    #[inline(always)]
    pub unsafe fn bits(&mut self, bits: u32) -> &mut Self {
        self.0.bits(bits);
        self
    }
}
#[doc = "capture/compare enable register\n\nThis register you can [`read`](crate::generic::Reg::read), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [ccer](index.html) module"]
pub struct CCER_SPEC;
impl crate::RegisterSpec for CCER_SPEC {
    type Ux = u32;
}
#[doc = "`read()` method returns [ccer::R](R) reader structure"]
impl crate::Readable for CCER_SPEC {
    type Reader = R;
}
#[doc = "`write(|w| ..)` method takes [ccer::W](W) writer structure"]
impl crate::Writable for CCER_SPEC {
    type Writer = W;
}
#[doc = "`reset()` method sets CCER to value 0"]
impl crate::Resettable for CCER_SPEC {
    #[inline(always)]
    fn reset_value() -> Self::Ux {
        0
    }
}