Module stm32g0::stm32g0c1::tim15::smcr [−][src]
Expand description
slave mode control register
Structs
Field MSM
reader - Master/slave mode
Field MSM
writer - Master/slave mode
Register SMCR
reader
slave mode control register
Field SMS1
reader - Slave mode selection When external signals are selected the active edge of the trigger signal (TRGI) is linked to the polarity selected on the external input (see Input Control register and Control Register description. Other codes: reserved. Note: The gated mode must not be used if TI1F_ED is selected as the trigger input (TS=â00100â). Indeed, TI1F_ED outputs 1 pulse for each transition on TI1F, whereas the gated mode checks the level of the trigger signal. Note: The clock of the slave peripherals (timer, ADC, …) receiving the TRGO or the TRGO2 signals must be enabled prior to receive events from the master timer, and the clock frequency (prescaler) must not be changed on-the-fly while triggers are received from the master timer.
Field SMS1
writer - Slave mode selection When external signals are selected the active edge of the trigger signal (TRGI) is linked to the polarity selected on the external input (see Input Control register and Control Register description. Other codes: reserved. Note: The gated mode must not be used if TI1F_ED is selected as the trigger input (TS=â00100â). Indeed, TI1F_ED outputs 1 pulse for each transition on TI1F, whereas the gated mode checks the level of the trigger signal. Note: The clock of the slave peripherals (timer, ADC, …) receiving the TRGO or the TRGO2 signals must be enabled prior to receive events from the master timer, and the clock frequency (prescaler) must not be changed on-the-fly while triggers are received from the master timer.
Field SMS2
reader - Slave mode selection When external signals are selected the active edge of the trigger signal (TRGI) is linked to the polarity selected on the external input (see Input Control register and Control Register description. Other codes: reserved. Note: The gated mode must not be used if TI1F_ED is selected as the trigger input (TS=â00100â). Indeed, TI1F_ED outputs 1 pulse for each transition on TI1F, whereas the gated mode checks the level of the trigger signal. Note: The clock of the slave peripherals (timer, ADC, …) receiving the TRGO or the TRGO2 signals must be enabled prior to receive events from the master timer, and the clock frequency (prescaler) must not be changed on-the-fly while triggers are received from the master timer.
Field SMS2
writer - Slave mode selection When external signals are selected the active edge of the trigger signal (TRGI) is linked to the polarity selected on the external input (see Input Control register and Control Register description. Other codes: reserved. Note: The gated mode must not be used if TI1F_ED is selected as the trigger input (TS=â00100â). Indeed, TI1F_ED outputs 1 pulse for each transition on TI1F, whereas the gated mode checks the level of the trigger signal. Note: The clock of the slave peripherals (timer, ADC, …) receiving the TRGO or the TRGO2 signals must be enabled prior to receive events from the master timer, and the clock frequency (prescaler) must not be changed on-the-fly while triggers are received from the master timer.
Field TS1
reader - Trigger selection This bit field selects the trigger input to be used to synchronize the counter. Other: Reserved See for more details on ITRx meaning for each Timer. Note: These bits must be changed only when they are not used (e.g. when SMS=000) to avoid wrong edge detections at the transition.
Field TS1
writer - Trigger selection This bit field selects the trigger input to be used to synchronize the counter. Other: Reserved See for more details on ITRx meaning for each Timer. Note: These bits must be changed only when they are not used (e.g. when SMS=000) to avoid wrong edge detections at the transition.
Field TS2
reader - Trigger selection This bit field selects the trigger input to be used to synchronize the counter. Other: Reserved See for more details on ITRx meaning for each Timer. Note: These bits must be changed only when they are not used (e.g. when SMS=000) to avoid wrong edge detections at the transition.
Field TS2
writer - Trigger selection This bit field selects the trigger input to be used to synchronize the counter. Other: Reserved See for more details on ITRx meaning for each Timer. Note: These bits must be changed only when they are not used (e.g. when SMS=000) to avoid wrong edge detections at the transition.
Register SMCR
writer
Enums
Master/slave mode