Module stm32g0::stm32g0b0::tim15::egr [−][src]
Expand description
event generation register
Structs
Field BG writer - Break generation This bit is set by software in order to generate an event, it is automatically cleared by hardware.
Field CC1G writer - Capture/Compare 1 generation This bit is set by software in order to generate an event, it is automatically cleared by hardware. If channel CC1 is configured as output: CC1IF flag is set, Corresponding interrupt or DMA request is sent if enabled. If channel CC1 is configured as input: The current value of the counter is captured in TIMx_CCR1 register. The CC1IF flag is set, the corresponding interrupt or DMA request is sent if enabled. The CC1OF flag is set if the CC1IF flag was already high.
Field CC2G writer - Capture/Compare 2 generation Refer to CC1G description
Field COMG writer - Capture/Compare control update generation This bit can be set by software, it is automatically cleared by hardware. Note: This bit acts only on channels that have a complementary output.
event generation register
Field TG writer - Trigger generation This bit is set by software in order to generate an event, it is automatically cleared by hardware.
Field UG writer - Update generation This bit can be set by software, it is automatically cleared by hardware.
Register EGR writer
Enums
Break generation This bit is set by software in order to generate an event, it is automatically cleared by hardware.
Capture/Compare 1 generation This bit is set by software in order to generate an event, it is automatically cleared by hardware. If channel CC1 is configured as output: CC1IF flag is set, Corresponding interrupt or DMA request is sent if enabled. If channel CC1 is configured as input: The current value of the counter is captured in TIMx_CCR1 register. The CC1IF flag is set, the corresponding interrupt or DMA request is sent if enabled. The CC1OF flag is set if the CC1IF flag was already high.
Capture/Compare control update generation This bit can be set by software, it is automatically cleared by hardware. Note: This bit acts only on channels that have a complementary output.
Trigger generation This bit is set by software in order to generate an event, it is automatically cleared by hardware.
Update generation This bit can be set by software, it is automatically cleared by hardware.