Module stm32g0::stm32g081::dac::dac_mcr

DAC mode control register

Structs

DAC_MCR_SPEC

DAC mode control register

MODE1_R

Field MODE1 reader - DAC Channel 1 mode These bits can be written only when the DAC is disabled and not in the calibration mode (when bit EN1=0 and bit CEN1 =0 in the DAC_CR register). If EN1=1 or CEN1 =1 the write operation is ignored. They can be set and cleared by software to select the DAC Channel 1 mode: DAC Channel 1 in normal Mode DAC Channel 1 in sample & hold mode

MODE1_W

Field MODE1 writer - DAC Channel 1 mode These bits can be written only when the DAC is disabled and not in the calibration mode (when bit EN1=0 and bit CEN1 =0 in the DAC_CR register). If EN1=1 or CEN1 =1 the write operation is ignored. They can be set and cleared by software to select the DAC Channel 1 mode: DAC Channel 1 in normal Mode DAC Channel 1 in sample & hold mode

MODE2_R

Field MODE2 reader - DAC Channel 2 mode These bits can be written only when the DAC is disabled and not in the calibration mode (when bit EN2=0 and bit CEN2 =0 in the DAC_CR register). If EN2=1 or CEN2 =1 the write operation is ignored. They can be set and cleared by software to select the DAC Channel 2 mode: DAC Channel 2 in normal Mode DAC Channel 2 in sample & hold mode

MODE2_W

Field MODE2 writer - DAC Channel 2 mode These bits can be written only when the DAC is disabled and not in the calibration mode (when bit EN2=0 and bit CEN2 =0 in the DAC_CR register). If EN2=1 or CEN2 =1 the write operation is ignored. They can be set and cleared by software to select the DAC Channel 2 mode: DAC Channel 2 in normal Mode DAC Channel 2 in sample & hold mode

R

Register DAC_MCR reader

W

Register DAC_MCR writer