[−][src]Struct stm32f3xx_hal::gpio::gpioa::PA15
Pin
Methods
impl<MODE> PA15<MODE>[src]
pub fn into_af0(self, moder: &mut MODER, afr: &mut AFRH) -> PA15<AF0>[src]
Configures the pin to serve as a specific alternate function
pub fn into_af1(self, moder: &mut MODER, afr: &mut AFRH) -> PA15<AF1>[src]
Configures the pin to serve as a specific alternate function
pub fn into_af4(self, moder: &mut MODER, afr: &mut AFRH) -> PA15<AF4>[src]
Configures the pin to serve as a specific alternate function
pub fn into_af15(self, moder: &mut MODER, afr: &mut AFRH) -> PA15<AF15>[src]
Configures the pin to serve as a specific alternate function
pub fn into_af2(self, moder: &mut MODER, afr: &mut AFRH) -> PA15<AF2>[src]
Configures the pin to serve as a specific alternate function
pub fn into_af5(self, moder: &mut MODER, afr: &mut AFRH) -> PA15<AF5>[src]
Configures the pin to serve as a specific alternate function
pub fn into_af6(self, moder: &mut MODER, afr: &mut AFRH) -> PA15<AF6>[src]
Configures the pin to serve as a specific alternate function
pub fn into_af7(self, moder: &mut MODER, afr: &mut AFRH) -> PA15<AF7>[src]
Configures the pin to serve as a specific alternate function
pub fn into_af9(self, moder: &mut MODER, afr: &mut AFRH) -> PA15<AF9>[src]
Configures the pin to serve as a specific alternate function
pub fn into_floating_input(
self,
moder: &mut MODER,
pupdr: &mut PUPDR
) -> PA15<Input<Floating>>[src]
self,
moder: &mut MODER,
pupdr: &mut PUPDR
) -> PA15<Input<Floating>>
Configures the pin to operate as a floating input pin
pub fn into_pull_down_input(
self,
moder: &mut MODER,
pupdr: &mut PUPDR
) -> PA15<Input<PullDown>>[src]
self,
moder: &mut MODER,
pupdr: &mut PUPDR
) -> PA15<Input<PullDown>>
Configures the pin to operate as a pulled down input pin
pub fn into_pull_up_input(
self,
moder: &mut MODER,
pupdr: &mut PUPDR
) -> PA15<Input<PullUp>>[src]
self,
moder: &mut MODER,
pupdr: &mut PUPDR
) -> PA15<Input<PullUp>>
Configures the pin to operate as a pulled up input pin
pub fn into_open_drain_output(
self,
moder: &mut MODER,
otyper: &mut OTYPER
) -> PA15<Output<OpenDrain>>[src]
self,
moder: &mut MODER,
otyper: &mut OTYPER
) -> PA15<Output<OpenDrain>>
Configures the pin to operate as an open drain output pin
pub fn into_push_pull_output(
self,
moder: &mut MODER,
otyper: &mut OTYPER
) -> PA15<Output<PushPull>>[src]
self,
moder: &mut MODER,
otyper: &mut OTYPER
) -> PA15<Output<PushPull>>
Configures the pin to operate as an push pull output pin
pub fn into_analog(self, moder: &mut MODER, pupdr: &mut PUPDR) -> PA15<Analog>[src]
Configures the pin to operate as analog, with disabled schmitt trigger. This mode is suitable when the pin is connected to the DAC or ADC.
impl PA15<Output<OpenDrain>>[src]
pub fn internal_pull_up(&mut self, pupdr: &mut PUPDR, on: bool)[src]
Enables / disables the internal pull up
impl<MODE> PA15<Output<MODE>>[src]
pub fn downgrade(self) -> PAx<Output<MODE>>[src]
Erases the pin number from the type
This is useful when you want to collect the pins into an array where you need all the elements to have the same type
impl<MODE> PA15<Input<MODE>>[src]
pub fn downgrade(self) -> PAx<Input<MODE>>[src]
Erases the pin number from the type
This is useful when you want to collect the pins into an array where you need all the elements to have the same type
Trait Implementations
impl<MODE> Default for PA15<Output<MODE>>[src]
impl<MODE> InputPin for PA15<Input<MODE>>[src]
type Error = ()
Error type
fn is_high(&self) -> Result<bool, Self::Error>[src]
fn is_low(&self) -> Result<bool, Self::Error>[src]
impl<MODE> OutputPin for PA15<Output<MODE>>[src]
type Error = ()
Error type
fn set_high(&mut self) -> Result<(), Self::Error>[src]
fn set_low(&mut self) -> Result<(), Self::Error>[src]
impl<MODE> StatefulOutputPin for PA15<Output<MODE>>[src]
fn is_set_high(&self) -> Result<bool, Self::Error>[src]
fn is_set_low(&self) -> Result<bool, Self::Error>[src]
Auto Trait Implementations
impl<MODE> Send for PA15<MODE> where
MODE: Send,
MODE: Send,
impl<MODE> Sync for PA15<MODE> where
MODE: Sync,
MODE: Sync,
impl<MODE> Unpin for PA15<MODE> where
MODE: Unpin,
MODE: Unpin,
Blanket Implementations
impl<T> Any for T where
T: 'static + ?Sized, [src]
T: 'static + ?Sized,
impl<T> Borrow<T> for T where
T: ?Sized, [src]
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized, [src]
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T[src]
impl<T> From<T> for T[src]
impl<T> InputPin for T where
T: InputPin, [src]
T: InputPin,
type Error = ()
Error type
fn is_low(&self) -> Result<bool, <T as InputPin>::Error>[src]
fn is_high(&self) -> Result<bool, <T as InputPin>::Error>[src]
impl<T, U> Into<U> for T where
U: From<T>, [src]
U: From<T>,
impl<T> OutputPin for T where
T: OutputPin, [src]
T: OutputPin,
type Error = ()
Error type
fn set_low(&mut self) -> Result<(), <T as OutputPin>::Error>[src]
fn set_high(&mut self) -> Result<(), <T as OutputPin>::Error>[src]
impl<T> Same<T> for T
type Output = T
Should always be Self
impl<T> StatefulOutputPin for T where
T: StatefulOutputPin + OutputPin, [src]
T: StatefulOutputPin + OutputPin,
fn is_set_low(&self) -> Result<bool, <T as OutputPin>::Error>[src]
fn is_set_high(&self) -> Result<bool, <T as OutputPin>::Error>[src]
impl<P> ToggleableOutputPin for P where
P: Default, [src]
P: Default,
type Error = <P as OutputPin>::Error
Error type
fn toggle(&mut self) -> Result<(), <P as ToggleableOutputPin>::Error>[src]
Toggle pin output
impl<T, U> TryFrom<U> for T where
U: Into<T>, [src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>[src]
impl<T, U> TryInto<U> for T where
U: TryFrom<T>, [src]
U: TryFrom<T>,