Module stm32_hal2::pac::sdmmc1::fifor

The receive and transmit FIFOs can be only read or written as word (32-bit) wide registers. The FIFOs contain 16 entries on sequential addresses. This allows the CPU to use its load and store multiple operands to read from/write to the FIFO.When accessing SDMMC_FIFOR with half word or byte access an AHB bus fault is generated.

Structs

• FIFOR_SPEC
  The receive and transmit FIFOs can be only read or written as word (32-bit) wide registers. The FIFOs contain 16 entries on sequential addresses. This allows the CPU to use its load and store multiple operands to read from/write to the FIFO.When accessing SDMMC_FIFOR with half word or byte access an AHB bus fault is generated.
• R
  Register FIFOR reader
• W
  Register FIFOR writer

Type Aliases

• FIFODATA_R
  Field FIFODATA reader - Receive and transmit FIFO data This register can only be read or written by firmware when the DPSM is active (DPSMACT=1). The FIFO data occupies 16 entries of 32-bit words.
• FIFODATA_W
  Field FIFODATA writer - Receive and transmit FIFO data This register can only be read or written by firmware when the DPSM is active (DPSMACT=1). The FIFO data occupies 16 entries of 32-bit words.