Module stm32_hal2::pac::sai1::ch::sr

Status register

Structs

• R
  Register SR reader
• SR_SPEC
  Status register

Enums

• AFSDET_A
  Anticipated frame synchronization detection. This bit is read only. This flag can be set only if the audio block is configured in slave mode. It is not used in AC97or SPDIF mode. It can generate an interrupt if AFSDETIE bit is set in SAI_xIM register. This flag is cleared when the software sets CAFSDET bit in SAI_xCLRFR register.
• CNRDY_A
  Codec not ready. This bit is read only. This bit is used only when the AC97 audio protocol is selected in the SAI_xCR1 register and configured in receiver mode. It can generate an interrupt if CNRDYIE bit is set in SAI_xIM register. This flag is cleared when the software sets CCNRDY bit in SAI_xCLRFR register.
• FLVL_A
  FIFO level threshold. This bit is read only. The FIFO level threshold flag is managed only by hardware and its setting depends on SAI block configuration (transmitter or receiver mode). If the SAI block is configured as transmitter: If SAI block is configured as receiver:
• FREQ_A
  FIFO request. This bit is read only. The request depends on the audio block configuration: If the block is configured in transmission mode, the FIFO request is related to a write request operation in the SAI_xDR. If the block configured in reception, the FIFO request related to a read request operation from the SAI_xDR. This flag can generate an interrupt if FREQIE bit is set in SAI_xIM register.
• LFSDET_A
  Late frame synchronization detection. This bit is read only. This flag can be set only if the audio block is configured in slave mode. It is not used in AC97 or SPDIF mode. It can generate an interrupt if LFSDETIE bit is set in the SAI_xIM register. This flag is cleared when the software sets bit CLFSDET in SAI_xCLRFR register
• MUTEDET_A
  Mute detection. This bit is read only. This flag is set if consecutive 0 values are received in each slot of a given audio frame and for a consecutive number of audio frames (set in the MUTECNT bit in the SAI_xCR2 register). It can generate an interrupt if MUTEDETIE bit is set in SAI_xIM register. This flag is cleared when the software sets bit CMUTEDET in the SAI_xCLRFR register.
• OVRUDR_A
  Overrun / underrun. This bit is read only. The overrun and underrun conditions can occur only when the audio block is configured as a receiver and a transmitter, respectively. It can generate an interrupt if OVRUDRIE bit is set in SAI_xIM register. This flag is cleared when the software sets COVRUDR bit in SAI_xCLRFR register.
• WCKCFG_A
  Wrong clock configuration flag. This bit is read only. This bit is used only when the audio block operates in master mode (MODE[1] = 0) and NODIV = 0. It can generate an interrupt if WCKCFGIE bit is set in SAI_xIM register. This flag is cleared when the software sets CWCKCFG bit in SAI_xCLRFR register.

Type Aliases

• AFSDET_R
  Field AFSDET reader - Anticipated frame synchronization detection. This bit is read only. This flag can be set only if the audio block is configured in slave mode. It is not used in AC97or SPDIF mode. It can generate an interrupt if AFSDETIE bit is set in SAI_xIM register. This flag is cleared when the software sets CAFSDET bit in SAI_xCLRFR register.
• CNRDY_R
  Field CNRDY reader - Codec not ready. This bit is read only. This bit is used only when the AC97 audio protocol is selected in the SAI_xCR1 register and configured in receiver mode. It can generate an interrupt if CNRDYIE bit is set in SAI_xIM register. This flag is cleared when the software sets CCNRDY bit in SAI_xCLRFR register.
• FLVL_R
  Field FLVL reader - FIFO level threshold. This bit is read only. The FIFO level threshold flag is managed only by hardware and its setting depends on SAI block configuration (transmitter or receiver mode). If the SAI block is configured as transmitter: If SAI block is configured as receiver:
• FREQ_R
  Field FREQ reader - FIFO request. This bit is read only. The request depends on the audio block configuration: If the block is configured in transmission mode, the FIFO request is related to a write request operation in the SAI_xDR. If the block configured in reception, the FIFO request related to a read request operation from the SAI_xDR. This flag can generate an interrupt if FREQIE bit is set in SAI_xIM register.
• LFSDET_R
  Field LFSDET reader - Late frame synchronization detection. This bit is read only. This flag can be set only if the audio block is configured in slave mode. It is not used in AC97 or SPDIF mode. It can generate an interrupt if LFSDETIE bit is set in the SAI_xIM register. This flag is cleared when the software sets bit CLFSDET in SAI_xCLRFR register
• MUTEDET_R
  Field MUTEDET reader - Mute detection. This bit is read only. This flag is set if consecutive 0 values are received in each slot of a given audio frame and for a consecutive number of audio frames (set in the MUTECNT bit in the SAI_xCR2 register). It can generate an interrupt if MUTEDETIE bit is set in SAI_xIM register. This flag is cleared when the software sets bit CMUTEDET in the SAI_xCLRFR register.
• OVRUDR_R
  Field OVRUDR reader - Overrun / underrun. This bit is read only. The overrun and underrun conditions can occur only when the audio block is configured as a receiver and a transmitter, respectively. It can generate an interrupt if OVRUDRIE bit is set in SAI_xIM register. This flag is cleared when the software sets COVRUDR bit in SAI_xCLRFR register.
• WCKCFG_R
  Field WCKCFG reader - Wrong clock configuration flag. This bit is read only. This bit is used only when the audio block operates in master mode (MODE[1] = 0) and NODIV = 0. It can generate an interrupt if WCKCFGIE bit is set in SAI_xIM register. This flag is cleared when the software sets CWCKCFG bit in SAI_xCLRFR register.