Module stm32_hal2::pac::pwr::wkupepr

Reset only by system reset, not reset by wakeup from Standby mode

Structs

• R
  Register WKUPEPR reader
• W
  Register WKUPEPR writer
• WKUPEPR_SPEC
  Reset only by system reset, not reset by wakeup from Standby mode

Type Aliases

• WKUPEN1_R
  Field WKUPEN1 reader - Enable Wakeup Pin WKUPn+1 Each bit is set and cleared by software. Note: An additional wakeup event is detected if WKUPn+1 pin is enabled (by setting the WKUPENn+1 bit) when WKUPn+1 pin level is already high when WKUPPn+1 selects rising edge, or low when WKUPPn+1 selects falling edge.
• WKUPEN1_W
  Field WKUPEN1 writer - Enable Wakeup Pin WKUPn+1 Each bit is set and cleared by software. Note: An additional wakeup event is detected if WKUPn+1 pin is enabled (by setting the WKUPENn+1 bit) when WKUPn+1 pin level is already high when WKUPPn+1 selects rising edge, or low when WKUPPn+1 selects falling edge.
• WKUPEN2_R
  Field WKUPEN2 reader - Enable Wakeup Pin WKUPn+1 Each bit is set and cleared by software. Note: An additional wakeup event is detected if WKUPn+1 pin is enabled (by setting the WKUPENn+1 bit) when WKUPn+1 pin level is already high when WKUPPn+1 selects rising edge, or low when WKUPPn+1 selects falling edge.
• WKUPEN2_W
  Field WKUPEN2 writer - Enable Wakeup Pin WKUPn+1 Each bit is set and cleared by software. Note: An additional wakeup event is detected if WKUPn+1 pin is enabled (by setting the WKUPENn+1 bit) when WKUPn+1 pin level is already high when WKUPPn+1 selects rising edge, or low when WKUPPn+1 selects falling edge.
• WKUPEN3_R
  Field WKUPEN3 reader - Enable Wakeup Pin WKUPn+1 Each bit is set and cleared by software. Note: An additional wakeup event is detected if WKUPn+1 pin is enabled (by setting the WKUPENn+1 bit) when WKUPn+1 pin level is already high when WKUPPn+1 selects rising edge, or low when WKUPPn+1 selects falling edge.
• WKUPEN3_W
  Field WKUPEN3 writer - Enable Wakeup Pin WKUPn+1 Each bit is set and cleared by software. Note: An additional wakeup event is detected if WKUPn+1 pin is enabled (by setting the WKUPENn+1 bit) when WKUPn+1 pin level is already high when WKUPPn+1 selects rising edge, or low when WKUPPn+1 selects falling edge.
• WKUPEN4_R
  Field WKUPEN4 reader - Enable Wakeup Pin WKUPn+1 Each bit is set and cleared by software. Note: An additional wakeup event is detected if WKUPn+1 pin is enabled (by setting the WKUPENn+1 bit) when WKUPn+1 pin level is already high when WKUPPn+1 selects rising edge, or low when WKUPPn+1 selects falling edge.
• WKUPEN4_W
  Field WKUPEN4 writer - Enable Wakeup Pin WKUPn+1 Each bit is set and cleared by software. Note: An additional wakeup event is detected if WKUPn+1 pin is enabled (by setting the WKUPENn+1 bit) when WKUPn+1 pin level is already high when WKUPPn+1 selects rising edge, or low when WKUPPn+1 selects falling edge.
• WKUPEN5_R
  Field WKUPEN5 reader - Enable Wakeup Pin WKUPn+1 Each bit is set and cleared by software. Note: An additional wakeup event is detected if WKUPn+1 pin is enabled (by setting the WKUPENn+1 bit) when WKUPn+1 pin level is already high when WKUPPn+1 selects rising edge, or low when WKUPPn+1 selects falling edge.
• WKUPEN5_W
  Field WKUPEN5 writer - Enable Wakeup Pin WKUPn+1 Each bit is set and cleared by software. Note: An additional wakeup event is detected if WKUPn+1 pin is enabled (by setting the WKUPENn+1 bit) when WKUPn+1 pin level is already high when WKUPPn+1 selects rising edge, or low when WKUPPn+1 selects falling edge.
• WKUPEN6_R
  Field WKUPEN6 reader - Enable Wakeup Pin WKUPn+1 Each bit is set and cleared by software. Note: An additional wakeup event is detected if WKUPn+1 pin is enabled (by setting the WKUPENn+1 bit) when WKUPn+1 pin level is already high when WKUPPn+1 selects rising edge, or low when WKUPPn+1 selects falling edge.
• WKUPEN6_W
  Field WKUPEN6 writer - Enable Wakeup Pin WKUPn+1 Each bit is set and cleared by software. Note: An additional wakeup event is detected if WKUPn+1 pin is enabled (by setting the WKUPENn+1 bit) when WKUPn+1 pin level is already high when WKUPPn+1 selects rising edge, or low when WKUPPn+1 selects falling edge.
• WKUPP1_R
  Field WKUPP1 reader - Wakeup pin polarity bit for WKUPn-7 These bits define the polarity used for event detection on WKUPn-7 external wakeup pin.
• WKUPP1_W
  Field WKUPP1 writer - Wakeup pin polarity bit for WKUPn-7 These bits define the polarity used for event detection on WKUPn-7 external wakeup pin.
• WKUPP2_R
  Field WKUPP2 reader - Wakeup pin polarity bit for WKUPn-7 These bits define the polarity used for event detection on WKUPn-7 external wakeup pin.
• WKUPP2_W
  Field WKUPP2 writer - Wakeup pin polarity bit for WKUPn-7 These bits define the polarity used for event detection on WKUPn-7 external wakeup pin.
• WKUPP3_R
  Field WKUPP3 reader - Wakeup pin polarity bit for WKUPn-7 These bits define the polarity used for event detection on WKUPn-7 external wakeup pin.
• WKUPP3_W
  Field WKUPP3 writer - Wakeup pin polarity bit for WKUPn-7 These bits define the polarity used for event detection on WKUPn-7 external wakeup pin.
• WKUPP4_R
  Field WKUPP4 reader - Wakeup pin polarity bit for WKUPn-7 These bits define the polarity used for event detection on WKUPn-7 external wakeup pin.
• WKUPP4_W
  Field WKUPP4 writer - Wakeup pin polarity bit for WKUPn-7 These bits define the polarity used for event detection on WKUPn-7 external wakeup pin.
• WKUPP5_R
  Field WKUPP5 reader - Wakeup pin polarity bit for WKUPn-7 These bits define the polarity used for event detection on WKUPn-7 external wakeup pin.
• WKUPP5_W
  Field WKUPP5 writer - Wakeup pin polarity bit for WKUPn-7 These bits define the polarity used for event detection on WKUPn-7 external wakeup pin.
• WKUPP6_R
  Field WKUPP6 reader - Wakeup pin polarity bit for WKUPn-7 These bits define the polarity used for event detection on WKUPn-7 external wakeup pin.
• WKUPP6_W
  Field WKUPP6 writer - Wakeup pin polarity bit for WKUPn-7 These bits define the polarity used for event detection on WKUPn-7 external wakeup pin.
• WKUPPUPD1_R
  Field WKUPPUPD1 reader - Wakeup pin pull configuration
• WKUPPUPD1_W
  Field WKUPPUPD1 writer - Wakeup pin pull configuration
• WKUPPUPD2_R
  Field WKUPPUPD2 reader - Wakeup pin pull configuration
• WKUPPUPD2_W
  Field WKUPPUPD2 writer - Wakeup pin pull configuration
• WKUPPUPD3_R
  Field WKUPPUPD3 reader - Wakeup pin pull configuration
• WKUPPUPD3_W
  Field WKUPPUPD3 writer - Wakeup pin pull configuration
• WKUPPUPD4_R
  Field WKUPPUPD4 reader - Wakeup pin pull configuration
• WKUPPUPD4_W
  Field WKUPPUPD4 writer - Wakeup pin pull configuration
• WKUPPUPD5_R
  Field WKUPPUPD5 reader - Wakeup pin pull configuration
• WKUPPUPD5_W
  Field WKUPPUPD5 writer - Wakeup pin pull configuration
• WKUPPUPD6_R
  Field WKUPPUPD6 reader - Wakeup pin pull configuration for WKUP(truncate(n/2)-7) These bits define the I/O pad pull configuration used when WKUPEN(truncate(n/2)-7) = 1. The associated GPIO port pull configuration shall be set to the same value or to 00. The Wakeup pin pull configuration is kept in Standby mode.
• WKUPPUPD6_W
  Field WKUPPUPD6 writer - Wakeup pin pull configuration for WKUP(truncate(n/2)-7) These bits define the I/O pad pull configuration used when WKUPEN(truncate(n/2)-7) = 1. The associated GPIO port pull configuration shall be set to the same value or to 00. The Wakeup pin pull configuration is kept in Standby mode.