1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57

/// Micron MT48LC4M32B2 SDRAM
#[allow(unused)]

/// Speed Grade 6
pub mod mt48lc4m32b2_6 {
    use crate::sdram::{SdramChip, SdramConfiguration, SdramTiming};

    const BURST_LENGTH_1: u16 = 0x0000;
    const BURST_LENGTH_2: u16 = 0x0001;
    const BURST_LENGTH_4: u16 = 0x0002;
    const BURST_LENGTH_8: u16 = 0x0004;
    const BURST_TYPE_SEQUENTIAL: u16 = 0x0000;
    const BURST_TYPE_INTERLEAVED: u16 = 0x0008;
    const CAS_LATENCY_2: u16 = 0x0020;
    const CAS_LATENCY_3: u16 = 0x0030;
    const OPERATING_MODE_STANDARD: u16 = 0x0000;
    const WRITEBURST_MODE_PROGRAMMED: u16 = 0x0000;
    const WRITEBURST_MODE_SINGLE: u16 = 0x0200;

    /// MT48LC4M32B2 with Speed Grade 6
    #[derive(Clone, Copy, Debug, PartialEq)]
    pub struct Mt48lc4m32b2 {}

    impl SdramChip for Mt48lc4m32b2 {
        /// Value of the mode register
        const MODE_REGISTER: u16 = BURST_LENGTH_1
            | BURST_TYPE_SEQUENTIAL
            | CAS_LATENCY_3
            | OPERATING_MODE_STANDARD
            | WRITEBURST_MODE_SINGLE;

        /// Timing Parameters
        const TIMING: SdramTiming = SdramTiming {
            startup_delay_ns: 100_000,    // 100 µs
            max_sd_clock_hz: 100_000_000, // 100 MHz
            refresh_period_ns: 15_625,    // 64ms / (4096 rows) = 15625ns
            mode_register_to_active: 2,   // tMRD = 2 cycles
            exit_self_refresh: 7,         // tXSR = 70ns
            active_to_precharge: 4,       // tRAS = 42ns
            row_cycle: 7,                 // tRC = 70ns
            row_precharge: 2,             // tRP = 18ns
            row_to_column: 2,             // tRCD = 18ns
        };

        /// SDRAM controller configuration
        const CONFIG: SdramConfiguration = SdramConfiguration {
            column_bits: 8,
            row_bits: 12,
            memory_data_width: 32, // 32-bit
            internal_banks: 4,     // 4 internal banks
            cas_latency: 3,        // CAS latency = 2
            write_protection: false,
            read_burst: true,
            read_pipe_delay_cycles: 0,
        };
    }
}