[−][src]Crate sodaq_sara_aff
Re-exports
pub use hal::target_device as pac; |
Modules
calibration | NVM Software Calibration Area Mapping |
clock | Configuring the system clock sources.
You will typically need to create an instance of |
delay | Delays |
gpio | Working with GPIO pins.
The pins are associated with the PORT hardware. This module
defines a |
pad | |
prelude | Import the prelude to gain convenient access to helper traits |
sercom | Working with the SERCOM peripherals. |
sleeping_delay | Delays with WFI sleep while we wait using a timer |
spi_common | |
time | Time units |
timer | Working with timer counter hardware |
timer_traits |
Structs
Pins | Maps the pins to their arduino names and the numbers printed on the board. |
Enums
ResetCause | ResetCause represents the reason the MCU was reset. |
Functions
reset_cause | Returns the cause of the last reset. |
serial_number | Returns the serial number of the chip as an array of bytes. The serial number is only guaranteed to be unique if all 16 bytes are used. |
split_serial_number | Returns the serial number of the chip as 4 32-bit integers. The serial number is only guaranteed to be unique if all 128 bits are used. |
uart | Convenience for setting up the serial communication pins operate as UART RX/TX (respectively) running at the specified baud. |
Attribute Macros
entry | Attribute to declare the entry point of the program |