Trait rusoto_globalaccelerator::GlobalAccelerator

pub trait GlobalAccelerator {
#[must_use]    pub fn add_custom_routing_endpoints<'life0, 'async_trait>(
        &'life0 self, 
        input: AddCustomRoutingEndpointsRequest
    ) -> Pin<Box<dyn Future<Output = Result<AddCustomRoutingEndpointsResponse, RusotoError<AddCustomRoutingEndpointsError>>> + Send + 'async_trait>>
    where
        'life0: 'async_trait,
        Self: 'async_trait;
#[must_use]    pub fn advertise_byoip_cidr<'life0, 'async_trait>(
        &'life0 self, 
        input: AdvertiseByoipCidrRequest
    ) -> Pin<Box<dyn Future<Output = Result<AdvertiseByoipCidrResponse, RusotoError<AdvertiseByoipCidrError>>> + Send + 'async_trait>>
    where
        'life0: 'async_trait,
        Self: 'async_trait;
#[must_use]    pub fn allow_custom_routing_traffic<'life0, 'async_trait>(
        &'life0 self, 
        input: AllowCustomRoutingTrafficRequest
    ) -> Pin<Box<dyn Future<Output = Result<(), RusotoError<AllowCustomRoutingTrafficError>>> + Send + 'async_trait>>
    where
        'life0: 'async_trait,
        Self: 'async_trait;
#[must_use]    pub fn create_accelerator<'life0, 'async_trait>(
        &'life0 self, 
        input: CreateAcceleratorRequest
    ) -> Pin<Box<dyn Future<Output = Result<CreateAcceleratorResponse, RusotoError<CreateAcceleratorError>>> + Send + 'async_trait>>
    where
        'life0: 'async_trait,
        Self: 'async_trait;
#[must_use]    pub fn create_custom_routing_accelerator<'life0, 'async_trait>(
        &'life0 self, 
        input: CreateCustomRoutingAcceleratorRequest
    ) -> Pin<Box<dyn Future<Output = Result<CreateCustomRoutingAcceleratorResponse, RusotoError<CreateCustomRoutingAcceleratorError>>> + Send + 'async_trait>>
    where
        'life0: 'async_trait,
        Self: 'async_trait;
#[must_use]    pub fn create_custom_routing_endpoint_group<'life0, 'async_trait>(
        &'life0 self, 
        input: CreateCustomRoutingEndpointGroupRequest
    ) -> Pin<Box<dyn Future<Output = Result<CreateCustomRoutingEndpointGroupResponse, RusotoError<CreateCustomRoutingEndpointGroupError>>> + Send + 'async_trait>>
    where
        'life0: 'async_trait,
        Self: 'async_trait;
#[must_use]    pub fn create_custom_routing_listener<'life0, 'async_trait>(
        &'life0 self, 
        input: CreateCustomRoutingListenerRequest
    ) -> Pin<Box<dyn Future<Output = Result<CreateCustomRoutingListenerResponse, RusotoError<CreateCustomRoutingListenerError>>> + Send + 'async_trait>>
    where
        'life0: 'async_trait,
        Self: 'async_trait;
#[must_use]    pub fn create_endpoint_group<'life0, 'async_trait>(
        &'life0 self, 
        input: CreateEndpointGroupRequest
    ) -> Pin<Box<dyn Future<Output = Result<CreateEndpointGroupResponse, RusotoError<CreateEndpointGroupError>>> + Send + 'async_trait>>
    where
        'life0: 'async_trait,
        Self: 'async_trait;
#[must_use]    pub fn create_listener<'life0, 'async_trait>(
        &'life0 self, 
        input: CreateListenerRequest
    ) -> Pin<Box<dyn Future<Output = Result<CreateListenerResponse, RusotoError<CreateListenerError>>> + Send + 'async_trait>>
    where
        'life0: 'async_trait,
        Self: 'async_trait;
#[must_use]    pub fn delete_accelerator<'life0, 'async_trait>(
        &'life0 self, 
        input: DeleteAcceleratorRequest
    ) -> Pin<Box<dyn Future<Output = Result<(), RusotoError<DeleteAcceleratorError>>> + Send + 'async_trait>>
    where
        'life0: 'async_trait,
        Self: 'async_trait;
#[must_use]    pub fn delete_custom_routing_accelerator<'life0, 'async_trait>(
        &'life0 self, 
        input: DeleteCustomRoutingAcceleratorRequest
    ) -> Pin<Box<dyn Future<Output = Result<(), RusotoError<DeleteCustomRoutingAcceleratorError>>> + Send + 'async_trait>>
    where
        'life0: 'async_trait,
        Self: 'async_trait;
#[must_use]    pub fn delete_custom_routing_endpoint_group<'life0, 'async_trait>(
        &'life0 self, 
        input: DeleteCustomRoutingEndpointGroupRequest
    ) -> Pin<Box<dyn Future<Output = Result<(), RusotoError<DeleteCustomRoutingEndpointGroupError>>> + Send + 'async_trait>>
    where
        'life0: 'async_trait,
        Self: 'async_trait;
#[must_use]    pub fn delete_custom_routing_listener<'life0, 'async_trait>(
        &'life0 self, 
        input: DeleteCustomRoutingListenerRequest
    ) -> Pin<Box<dyn Future<Output = Result<(), RusotoError<DeleteCustomRoutingListenerError>>> + Send + 'async_trait>>
    where
        'life0: 'async_trait,
        Self: 'async_trait;
#[must_use]    pub fn delete_endpoint_group<'life0, 'async_trait>(
        &'life0 self, 
        input: DeleteEndpointGroupRequest
    ) -> Pin<Box<dyn Future<Output = Result<(), RusotoError<DeleteEndpointGroupError>>> + Send + 'async_trait>>
    where
        'life0: 'async_trait,
        Self: 'async_trait;
#[must_use]    pub fn delete_listener<'life0, 'async_trait>(
        &'life0 self, 
        input: DeleteListenerRequest
    ) -> Pin<Box<dyn Future<Output = Result<(), RusotoError<DeleteListenerError>>> + Send + 'async_trait>>
    where
        'life0: 'async_trait,
        Self: 'async_trait;
#[must_use]    pub fn deny_custom_routing_traffic<'life0, 'async_trait>(
        &'life0 self, 
        input: DenyCustomRoutingTrafficRequest
    ) -> Pin<Box<dyn Future<Output = Result<(), RusotoError<DenyCustomRoutingTrafficError>>> + Send + 'async_trait>>
    where
        'life0: 'async_trait,
        Self: 'async_trait;
#[must_use]    pub fn deprovision_byoip_cidr<'life0, 'async_trait>(
        &'life0 self, 
        input: DeprovisionByoipCidrRequest
    ) -> Pin<Box<dyn Future<Output = Result<DeprovisionByoipCidrResponse, RusotoError<DeprovisionByoipCidrError>>> + Send + 'async_trait>>
    where
        'life0: 'async_trait,
        Self: 'async_trait;
#[must_use]    pub fn describe_accelerator<'life0, 'async_trait>(
        &'life0 self, 
        input: DescribeAcceleratorRequest
    ) -> Pin<Box<dyn Future<Output = Result<DescribeAcceleratorResponse, RusotoError<DescribeAcceleratorError>>> + Send + 'async_trait>>
    where
        'life0: 'async_trait,
        Self: 'async_trait;
#[must_use]    pub fn describe_accelerator_attributes<'life0, 'async_trait>(
        &'life0 self, 
        input: DescribeAcceleratorAttributesRequest
    ) -> Pin<Box<dyn Future<Output = Result<DescribeAcceleratorAttributesResponse, RusotoError<DescribeAcceleratorAttributesError>>> + Send + 'async_trait>>
    where
        'life0: 'async_trait,
        Self: 'async_trait;
#[must_use]    pub fn describe_custom_routing_accelerator<'life0, 'async_trait>(
        &'life0 self, 
        input: DescribeCustomRoutingAcceleratorRequest
    ) -> Pin<Box<dyn Future<Output = Result<DescribeCustomRoutingAcceleratorResponse, RusotoError<DescribeCustomRoutingAcceleratorError>>> + Send + 'async_trait>>
    where
        'life0: 'async_trait,
        Self: 'async_trait;
#[must_use]    pub fn describe_custom_routing_accelerator_attributes<'life0, 'async_trait>(
        &'life0 self, 
        input: DescribeCustomRoutingAcceleratorAttributesRequest
    ) -> Pin<Box<dyn Future<Output = Result<DescribeCustomRoutingAcceleratorAttributesResponse, RusotoError<DescribeCustomRoutingAcceleratorAttributesError>>> + Send + 'async_trait>>
    where
        'life0: 'async_trait,
        Self: 'async_trait;
#[must_use]    pub fn describe_custom_routing_endpoint_group<'life0, 'async_trait>(
        &'life0 self, 
        input: DescribeCustomRoutingEndpointGroupRequest
    ) -> Pin<Box<dyn Future<Output = Result<DescribeCustomRoutingEndpointGroupResponse, RusotoError<DescribeCustomRoutingEndpointGroupError>>> + Send + 'async_trait>>
    where
        'life0: 'async_trait,
        Self: 'async_trait;
#[must_use]    pub fn describe_custom_routing_listener<'life0, 'async_trait>(
        &'life0 self, 
        input: DescribeCustomRoutingListenerRequest
    ) -> Pin<Box<dyn Future<Output = Result<DescribeCustomRoutingListenerResponse, RusotoError<DescribeCustomRoutingListenerError>>> + Send + 'async_trait>>
    where
        'life0: 'async_trait,
        Self: 'async_trait;
#[must_use]    pub fn describe_endpoint_group<'life0, 'async_trait>(
        &'life0 self, 
        input: DescribeEndpointGroupRequest
    ) -> Pin<Box<dyn Future<Output = Result<DescribeEndpointGroupResponse, RusotoError<DescribeEndpointGroupError>>> + Send + 'async_trait>>
    where
        'life0: 'async_trait,
        Self: 'async_trait;
#[must_use]    pub fn describe_listener<'life0, 'async_trait>(
        &'life0 self, 
        input: DescribeListenerRequest
    ) -> Pin<Box<dyn Future<Output = Result<DescribeListenerResponse, RusotoError<DescribeListenerError>>> + Send + 'async_trait>>
    where
        'life0: 'async_trait,
        Self: 'async_trait;
#[must_use]    pub fn list_accelerators<'life0, 'async_trait>(
        &'life0 self, 
        input: ListAcceleratorsRequest
    ) -> Pin<Box<dyn Future<Output = Result<ListAcceleratorsResponse, RusotoError<ListAcceleratorsError>>> + Send + 'async_trait>>
    where
        'life0: 'async_trait,
        Self: 'async_trait;
#[must_use]    pub fn list_byoip_cidrs<'life0, 'async_trait>(
        &'life0 self, 
        input: ListByoipCidrsRequest
    ) -> Pin<Box<dyn Future<Output = Result<ListByoipCidrsResponse, RusotoError<ListByoipCidrsError>>> + Send + 'async_trait>>
    where
        'life0: 'async_trait,
        Self: 'async_trait;
#[must_use]    pub fn list_custom_routing_accelerators<'life0, 'async_trait>(
        &'life0 self, 
        input: ListCustomRoutingAcceleratorsRequest
    ) -> Pin<Box<dyn Future<Output = Result<ListCustomRoutingAcceleratorsResponse, RusotoError<ListCustomRoutingAcceleratorsError>>> + Send + 'async_trait>>
    where
        'life0: 'async_trait,
        Self: 'async_trait;
#[must_use]    pub fn list_custom_routing_endpoint_groups<'life0, 'async_trait>(
        &'life0 self, 
        input: ListCustomRoutingEndpointGroupsRequest
    ) -> Pin<Box<dyn Future<Output = Result<ListCustomRoutingEndpointGroupsResponse, RusotoError<ListCustomRoutingEndpointGroupsError>>> + Send + 'async_trait>>
    where
        'life0: 'async_trait,
        Self: 'async_trait;
#[must_use]    pub fn list_custom_routing_listeners<'life0, 'async_trait>(
        &'life0 self, 
        input: ListCustomRoutingListenersRequest
    ) -> Pin<Box<dyn Future<Output = Result<ListCustomRoutingListenersResponse, RusotoError<ListCustomRoutingListenersError>>> + Send + 'async_trait>>
    where
        'life0: 'async_trait,
        Self: 'async_trait;
#[must_use]    pub fn list_custom_routing_port_mappings<'life0, 'async_trait>(
        &'life0 self, 
        input: ListCustomRoutingPortMappingsRequest
    ) -> Pin<Box<dyn Future<Output = Result<ListCustomRoutingPortMappingsResponse, RusotoError<ListCustomRoutingPortMappingsError>>> + Send + 'async_trait>>
    where
        'life0: 'async_trait,
        Self: 'async_trait;
#[must_use]    pub fn list_custom_routing_port_mappings_by_destination<'life0, 'async_trait>(
        &'life0 self, 
        input: ListCustomRoutingPortMappingsByDestinationRequest
    ) -> Pin<Box<dyn Future<Output = Result<ListCustomRoutingPortMappingsByDestinationResponse, RusotoError<ListCustomRoutingPortMappingsByDestinationError>>> + Send + 'async_trait>>
    where
        'life0: 'async_trait,
        Self: 'async_trait;
#[must_use]    pub fn list_endpoint_groups<'life0, 'async_trait>(
        &'life0 self, 
        input: ListEndpointGroupsRequest
    ) -> Pin<Box<dyn Future<Output = Result<ListEndpointGroupsResponse, RusotoError<ListEndpointGroupsError>>> + Send + 'async_trait>>
    where
        'life0: 'async_trait,
        Self: 'async_trait;
#[must_use]    pub fn list_listeners<'life0, 'async_trait>(
        &'life0 self, 
        input: ListListenersRequest
    ) -> Pin<Box<dyn Future<Output = Result<ListListenersResponse, RusotoError<ListListenersError>>> + Send + 'async_trait>>
    where
        'life0: 'async_trait,
        Self: 'async_trait;
#[must_use]    pub fn list_tags_for_resource<'life0, 'async_trait>(
        &'life0 self, 
        input: ListTagsForResourceRequest
    ) -> Pin<Box<dyn Future<Output = Result<ListTagsForResourceResponse, RusotoError<ListTagsForResourceError>>> + Send + 'async_trait>>
    where
        'life0: 'async_trait,
        Self: 'async_trait;
#[must_use]    pub fn provision_byoip_cidr<'life0, 'async_trait>(
        &'life0 self, 
        input: ProvisionByoipCidrRequest
    ) -> Pin<Box<dyn Future<Output = Result<ProvisionByoipCidrResponse, RusotoError<ProvisionByoipCidrError>>> + Send + 'async_trait>>
    where
        'life0: 'async_trait,
        Self: 'async_trait;
#[must_use]    pub fn remove_custom_routing_endpoints<'life0, 'async_trait>(
        &'life0 self, 
        input: RemoveCustomRoutingEndpointsRequest
    ) -> Pin<Box<dyn Future<Output = Result<(), RusotoError<RemoveCustomRoutingEndpointsError>>> + Send + 'async_trait>>
    where
        'life0: 'async_trait,
        Self: 'async_trait;
#[must_use]    pub fn tag_resource<'life0, 'async_trait>(
        &'life0 self, 
        input: TagResourceRequest
    ) -> Pin<Box<dyn Future<Output = Result<TagResourceResponse, RusotoError<TagResourceError>>> + Send + 'async_trait>>
    where
        'life0: 'async_trait,
        Self: 'async_trait;
#[must_use]    pub fn untag_resource<'life0, 'async_trait>(
        &'life0 self, 
        input: UntagResourceRequest
    ) -> Pin<Box<dyn Future<Output = Result<UntagResourceResponse, RusotoError<UntagResourceError>>> + Send + 'async_trait>>
    where
        'life0: 'async_trait,
        Self: 'async_trait;
#[must_use]    pub fn update_accelerator<'life0, 'async_trait>(
        &'life0 self, 
        input: UpdateAcceleratorRequest
    ) -> Pin<Box<dyn Future<Output = Result<UpdateAcceleratorResponse, RusotoError<UpdateAcceleratorError>>> + Send + 'async_trait>>
    where
        'life0: 'async_trait,
        Self: 'async_trait;
#[must_use]    pub fn update_accelerator_attributes<'life0, 'async_trait>(
        &'life0 self, 
        input: UpdateAcceleratorAttributesRequest
    ) -> Pin<Box<dyn Future<Output = Result<UpdateAcceleratorAttributesResponse, RusotoError<UpdateAcceleratorAttributesError>>> + Send + 'async_trait>>
    where
        'life0: 'async_trait,
        Self: 'async_trait;
#[must_use]    pub fn update_custom_routing_accelerator<'life0, 'async_trait>(
        &'life0 self, 
        input: UpdateCustomRoutingAcceleratorRequest
    ) -> Pin<Box<dyn Future<Output = Result<UpdateCustomRoutingAcceleratorResponse, RusotoError<UpdateCustomRoutingAcceleratorError>>> + Send + 'async_trait>>
    where
        'life0: 'async_trait,
        Self: 'async_trait;
#[must_use]    pub fn update_custom_routing_accelerator_attributes<'life0, 'async_trait>(
        &'life0 self, 
        input: UpdateCustomRoutingAcceleratorAttributesRequest
    ) -> Pin<Box<dyn Future<Output = Result<UpdateCustomRoutingAcceleratorAttributesResponse, RusotoError<UpdateCustomRoutingAcceleratorAttributesError>>> + Send + 'async_trait>>
    where
        'life0: 'async_trait,
        Self: 'async_trait;
#[must_use]    pub fn update_custom_routing_listener<'life0, 'async_trait>(
        &'life0 self, 
        input: UpdateCustomRoutingListenerRequest
    ) -> Pin<Box<dyn Future<Output = Result<UpdateCustomRoutingListenerResponse, RusotoError<UpdateCustomRoutingListenerError>>> + Send + 'async_trait>>
    where
        'life0: 'async_trait,
        Self: 'async_trait;
#[must_use]    pub fn update_endpoint_group<'life0, 'async_trait>(
        &'life0 self, 
        input: UpdateEndpointGroupRequest
    ) -> Pin<Box<dyn Future<Output = Result<UpdateEndpointGroupResponse, RusotoError<UpdateEndpointGroupError>>> + Send + 'async_trait>>
    where
        'life0: 'async_trait,
        Self: 'async_trait;
#[must_use]    pub fn update_listener<'life0, 'async_trait>(
        &'life0 self, 
        input: UpdateListenerRequest
    ) -> Pin<Box<dyn Future<Output = Result<UpdateListenerResponse, RusotoError<UpdateListenerError>>> + Send + 'async_trait>>
    where
        'life0: 'async_trait,
        Self: 'async_trait;
#[must_use]    pub fn withdraw_byoip_cidr<'life0, 'async_trait>(
        &'life0 self, 
        input: WithdrawByoipCidrRequest
    ) -> Pin<Box<dyn Future<Output = Result<WithdrawByoipCidrResponse, RusotoError<WithdrawByoipCidrError>>> + Send + 'async_trait>>
    where
        'life0: 'async_trait,
        Self: 'async_trait;
}

Trait representing the capabilities of the AWS Global Accelerator API. AWS Global Accelerator clients implement this trait.

Required methods

#[must_use]pub fn add_custom_routing_endpoints<'life0, 'async_trait>(
    &'life0 self,
    input: AddCustomRoutingEndpointsRequest
) -> Pin<Box<dyn Future<Output = Result<AddCustomRoutingEndpointsResponse, RusotoError<AddCustomRoutingEndpointsError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Associate a virtual private cloud (VPC) subnet endpoint with your custom routing accelerator.

The listener port range must be large enough to support the number of IP addresses that can be specified in your subnet. The number of ports required is: subnet size times the number of ports per destination EC2 instances. For example, a subnet defined as /24 requires a listener port range of at least 255 ports.

Note: You must have enough remaining listener ports available to map to the subnet ports, or the call will fail with a LimitExceededException.

By default, all destinations in a subnet in a custom routing accelerator cannot receive traffic. To enable all destinations to receive traffic, or to specify individual port mappings that can receive traffic, see the AllowCustomRoutingTraffic operation.

#[must_use]pub fn advertise_byoip_cidr<'life0, 'async_trait>(
    &'life0 self,
    input: AdvertiseByoipCidrRequest
) -> Pin<Box<dyn Future<Output = Result<AdvertiseByoipCidrResponse, RusotoError<AdvertiseByoipCidrError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Advertises an IPv4 address range that is provisioned for use with your AWS resources through bring your own IP addresses (BYOIP). It can take a few minutes before traffic to the specified addresses starts routing to AWS because of propagation delays.

To stop advertising the BYOIP address range, use WithdrawByoipCidr.

For more information, see Bring Your Own IP Addresses (BYOIP) in the AWS Global Accelerator Developer Guide.

#[must_use]pub fn allow_custom_routing_traffic<'life0, 'async_trait>(
    &'life0 self,
    input: AllowCustomRoutingTrafficRequest
) -> Pin<Box<dyn Future<Output = Result<(), RusotoError<AllowCustomRoutingTrafficError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Specify the Amazon EC2 instance (destination) IP addresses and ports for a VPC subnet endpoint that can receive traffic for a custom routing accelerator. You can allow traffic to all destinations in the subnet endpoint, or allow traffic to a specified list of destination IP addresses and ports in the subnet. Note that you cannot specify IP addresses or ports outside of the range that you configured for the endpoint group.

After you make changes, you can verify that the updates are complete by checking the status of your accelerator: the status changes from IN_PROGRESS to DEPLOYED.

#[must_use]pub fn create_accelerator<'life0, 'async_trait>(
    &'life0 self,
    input: CreateAcceleratorRequest
) -> Pin<Box<dyn Future<Output = Result<CreateAcceleratorResponse, RusotoError<CreateAcceleratorError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Create an accelerator. An accelerator includes one or more listeners that process inbound connections and direct traffic to one or more endpoint groups, each of which includes endpoints, such as Network Load Balancers.

Global Accelerator is a global service that supports endpoints in multiple AWS Regions but you must specify the US West (Oregon) Region to create or update accelerators.

#[must_use]pub fn create_custom_routing_accelerator<'life0, 'async_trait>(
    &'life0 self,
    input: CreateCustomRoutingAcceleratorRequest
) -> Pin<Box<dyn Future<Output = Result<CreateCustomRoutingAcceleratorResponse, RusotoError<CreateCustomRoutingAcceleratorError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Create a custom routing accelerator. A custom routing accelerator directs traffic to one of possibly thousands of Amazon EC2 instance destinations running in a single or multiple virtual private clouds (VPC) subnet endpoints.

Be aware that, by default, all destination EC2 instances in a VPC subnet endpoint cannot receive traffic. To enable all destinations to receive traffic, or to specify individual port mappings that can receive traffic, see the AllowCustomRoutingTraffic operation.

#[must_use]pub fn create_custom_routing_endpoint_group<'life0, 'async_trait>(
    &'life0 self,
    input: CreateCustomRoutingEndpointGroupRequest
) -> Pin<Box<dyn Future<Output = Result<CreateCustomRoutingEndpointGroupResponse, RusotoError<CreateCustomRoutingEndpointGroupError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Create an endpoint group for the specified listener for a custom routing accelerator. An endpoint group is a collection of endpoints in one AWS Region.

#[must_use]pub fn create_custom_routing_listener<'life0, 'async_trait>(
    &'life0 self,
    input: CreateCustomRoutingListenerRequest
) -> Pin<Box<dyn Future<Output = Result<CreateCustomRoutingListenerResponse, RusotoError<CreateCustomRoutingListenerError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Create a listener to process inbound connections from clients to a custom routing accelerator. Connections arrive to assigned static IP addresses on the port range that you specify.

#[must_use]pub fn create_endpoint_group<'life0, 'async_trait>(
    &'life0 self,
    input: CreateEndpointGroupRequest
) -> Pin<Box<dyn Future<Output = Result<CreateEndpointGroupResponse, RusotoError<CreateEndpointGroupError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Create an endpoint group for the specified listener. An endpoint group is a collection of endpoints in one AWS Region. A resource must be valid and active when you add it as an endpoint.

#[must_use]pub fn create_listener<'life0, 'async_trait>(
    &'life0 self,
    input: CreateListenerRequest
) -> Pin<Box<dyn Future<Output = Result<CreateListenerResponse, RusotoError<CreateListenerError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Create a listener to process inbound connections from clients to an accelerator. Connections arrive to assigned static IP addresses on a port, port range, or list of port ranges that you specify.

#[must_use]pub fn delete_accelerator<'life0, 'async_trait>(
    &'life0 self,
    input: DeleteAcceleratorRequest
) -> Pin<Box<dyn Future<Output = Result<(), RusotoError<DeleteAcceleratorError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Delete an accelerator. Before you can delete an accelerator, you must disable it and remove all dependent resources (listeners and endpoint groups). To disable the accelerator, update the accelerator to set Enabled to false.

When you create an accelerator, by default, Global Accelerator provides you with a set of two static IP addresses. Alternatively, you can bring your own IP address ranges to Global Accelerator and assign IP addresses from those ranges.

The IP addresses are assigned to your accelerator for as long as it exists, even if you disable the accelerator and it no longer accepts or routes traffic. However, when you delete an accelerator, you lose the static IP addresses that are assigned to the accelerator, so you can no longer route traffic by using them. As a best practice, ensure that you have permissions in place to avoid inadvertently deleting accelerators. You can use IAM policies with Global Accelerator to limit the users who have permissions to delete an accelerator. For more information, see Authentication and Access Control in the AWS Global Accelerator Developer Guide.

#[must_use]pub fn delete_custom_routing_accelerator<'life0, 'async_trait>(
    &'life0 self,
    input: DeleteCustomRoutingAcceleratorRequest
) -> Pin<Box<dyn Future<Output = Result<(), RusotoError<DeleteCustomRoutingAcceleratorError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Delete a custom routing accelerator. Before you can delete an accelerator, you must disable it and remove all dependent resources (listeners and endpoint groups). To disable the accelerator, update the accelerator to set Enabled to false.

When you create a custom routing accelerator, by default, Global Accelerator provides you with a set of two static IP addresses.

The IP addresses are assigned to your accelerator for as long as it exists, even if you disable the accelerator and it no longer accepts or routes traffic. However, when you delete an accelerator, you lose the static IP addresses that are assigned to the accelerator, so you can no longer route traffic by using them. As a best practice, ensure that you have permissions in place to avoid inadvertently deleting accelerators. You can use IAM policies with Global Accelerator to limit the users who have permissions to delete an accelerator. For more information, see Authentication and Access Control in the AWS Global Accelerator Developer Guide.

#[must_use]pub fn delete_custom_routing_endpoint_group<'life0, 'async_trait>(
    &'life0 self,
    input: DeleteCustomRoutingEndpointGroupRequest
) -> Pin<Box<dyn Future<Output = Result<(), RusotoError<DeleteCustomRoutingEndpointGroupError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Delete an endpoint group from a listener for a custom routing accelerator.

#[must_use]pub fn delete_custom_routing_listener<'life0, 'async_trait>(
    &'life0 self,
    input: DeleteCustomRoutingListenerRequest
) -> Pin<Box<dyn Future<Output = Result<(), RusotoError<DeleteCustomRoutingListenerError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Delete a listener for a custom routing accelerator.

#[must_use]pub fn delete_endpoint_group<'life0, 'async_trait>(
    &'life0 self,
    input: DeleteEndpointGroupRequest
) -> Pin<Box<dyn Future<Output = Result<(), RusotoError<DeleteEndpointGroupError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Delete an endpoint group from a listener.

#[must_use]pub fn delete_listener<'life0, 'async_trait>(
    &'life0 self,
    input: DeleteListenerRequest
) -> Pin<Box<dyn Future<Output = Result<(), RusotoError<DeleteListenerError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Delete a listener from an accelerator.

#[must_use]pub fn deny_custom_routing_traffic<'life0, 'async_trait>(
    &'life0 self,
    input: DenyCustomRoutingTrafficRequest
) -> Pin<Box<dyn Future<Output = Result<(), RusotoError<DenyCustomRoutingTrafficError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Specify the Amazon EC2 instance (destination) IP addresses and ports for a VPC subnet endpoint that cannot receive traffic for a custom routing accelerator. You can deny traffic to all destinations in the VPC endpoint, or deny traffic to a specified list of destination IP addresses and ports. Note that you cannot specify IP addresses or ports outside of the range that you configured for the endpoint group.

After you make changes, you can verify that the updates are complete by checking the status of your accelerator: the status changes from IN_PROGRESS to DEPLOYED.

#[must_use]pub fn deprovision_byoip_cidr<'life0, 'async_trait>(
    &'life0 self,
    input: DeprovisionByoipCidrRequest
) -> Pin<Box<dyn Future<Output = Result<DeprovisionByoipCidrResponse, RusotoError<DeprovisionByoipCidrError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Releases the specified address range that you provisioned to use with your AWS resources through bring your own IP addresses (BYOIP) and deletes the corresponding address pool.

Before you can release an address range, you must stop advertising it by using WithdrawByoipCidr and you must not have any accelerators that are using static IP addresses allocated from its address range.

For more information, see Bring Your Own IP Addresses (BYOIP) in the AWS Global Accelerator Developer Guide.

#[must_use]pub fn describe_accelerator<'life0, 'async_trait>(
    &'life0 self,
    input: DescribeAcceleratorRequest
) -> Pin<Box<dyn Future<Output = Result<DescribeAcceleratorResponse, RusotoError<DescribeAcceleratorError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Describe an accelerator.

#[must_use]pub fn describe_accelerator_attributes<'life0, 'async_trait>(
    &'life0 self,
    input: DescribeAcceleratorAttributesRequest
) -> Pin<Box<dyn Future<Output = Result<DescribeAcceleratorAttributesResponse, RusotoError<DescribeAcceleratorAttributesError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Describe the attributes of an accelerator.

#[must_use]pub fn describe_custom_routing_accelerator<'life0, 'async_trait>(
    &'life0 self,
    input: DescribeCustomRoutingAcceleratorRequest
) -> Pin<Box<dyn Future<Output = Result<DescribeCustomRoutingAcceleratorResponse, RusotoError<DescribeCustomRoutingAcceleratorError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Describe a custom routing accelerator.

#[must_use]pub fn describe_custom_routing_accelerator_attributes<'life0, 'async_trait>(
    &'life0 self,
    input: DescribeCustomRoutingAcceleratorAttributesRequest
) -> Pin<Box<dyn Future<Output = Result<DescribeCustomRoutingAcceleratorAttributesResponse, RusotoError<DescribeCustomRoutingAcceleratorAttributesError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Describe the attributes of a custom routing accelerator.

#[must_use]pub fn describe_custom_routing_endpoint_group<'life0, 'async_trait>(
    &'life0 self,
    input: DescribeCustomRoutingEndpointGroupRequest
) -> Pin<Box<dyn Future<Output = Result<DescribeCustomRoutingEndpointGroupResponse, RusotoError<DescribeCustomRoutingEndpointGroupError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Describe an endpoint group for a custom routing accelerator.

#[must_use]pub fn describe_custom_routing_listener<'life0, 'async_trait>(
    &'life0 self,
    input: DescribeCustomRoutingListenerRequest
) -> Pin<Box<dyn Future<Output = Result<DescribeCustomRoutingListenerResponse, RusotoError<DescribeCustomRoutingListenerError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

The description of a listener for a custom routing accelerator.

#[must_use]pub fn describe_endpoint_group<'life0, 'async_trait>(
    &'life0 self,
    input: DescribeEndpointGroupRequest
) -> Pin<Box<dyn Future<Output = Result<DescribeEndpointGroupResponse, RusotoError<DescribeEndpointGroupError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Describe an endpoint group.

#[must_use]pub fn describe_listener<'life0, 'async_trait>(
    &'life0 self,
    input: DescribeListenerRequest
) -> Pin<Box<dyn Future<Output = Result<DescribeListenerResponse, RusotoError<DescribeListenerError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Describe a listener.

#[must_use]pub fn list_accelerators<'life0, 'async_trait>(
    &'life0 self,
    input: ListAcceleratorsRequest
) -> Pin<Box<dyn Future<Output = Result<ListAcceleratorsResponse, RusotoError<ListAcceleratorsError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

List the accelerators for an AWS account.

#[must_use]pub fn list_byoip_cidrs<'life0, 'async_trait>(
    &'life0 self,
    input: ListByoipCidrsRequest
) -> Pin<Box<dyn Future<Output = Result<ListByoipCidrsResponse, RusotoError<ListByoipCidrsError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Lists the IP address ranges that were specified in calls to ProvisionByoipCidr, including the current state and a history of state changes.

#[must_use]pub fn list_custom_routing_accelerators<'life0, 'async_trait>(
    &'life0 self,
    input: ListCustomRoutingAcceleratorsRequest
) -> Pin<Box<dyn Future<Output = Result<ListCustomRoutingAcceleratorsResponse, RusotoError<ListCustomRoutingAcceleratorsError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

List the custom routing accelerators for an AWS account.

#[must_use]pub fn list_custom_routing_endpoint_groups<'life0, 'async_trait>(
    &'life0 self,
    input: ListCustomRoutingEndpointGroupsRequest
) -> Pin<Box<dyn Future<Output = Result<ListCustomRoutingEndpointGroupsResponse, RusotoError<ListCustomRoutingEndpointGroupsError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

List the endpoint groups that are associated with a listener for a custom routing accelerator.

#[must_use]pub fn list_custom_routing_listeners<'life0, 'async_trait>(
    &'life0 self,
    input: ListCustomRoutingListenersRequest
) -> Pin<Box<dyn Future<Output = Result<ListCustomRoutingListenersResponse, RusotoError<ListCustomRoutingListenersError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

List the listeners for a custom routing accelerator.

#[must_use]pub fn list_custom_routing_port_mappings<'life0, 'async_trait>(
    &'life0 self,
    input: ListCustomRoutingPortMappingsRequest
) -> Pin<Box<dyn Future<Output = Result<ListCustomRoutingPortMappingsResponse, RusotoError<ListCustomRoutingPortMappingsError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Provides a complete mapping from the public accelerator IP address and port to destination EC2 instance IP addresses and ports in the virtual public cloud (VPC) subnet endpoint for a custom routing accelerator. For each subnet endpoint that you add, Global Accelerator creates a new static port mapping for the accelerator. The port mappings don't change after Global Accelerator generates them, so you can retrieve and cache the full mapping on your servers.

If you remove a subnet from your accelerator, Global Accelerator removes (reclaims) the port mappings. If you add a subnet to your accelerator, Global Accelerator creates new port mappings (the existing ones don't change). If you add or remove EC2 instances in your subnet, the port mappings don't change, because the mappings are created when you add the subnet to Global Accelerator.

The mappings also include a flag for each destination denoting which destination IP addresses and ports are allowed or denied traffic.

#[must_use]pub fn list_custom_routing_port_mappings_by_destination<'life0, 'async_trait>(
    &'life0 self,
    input: ListCustomRoutingPortMappingsByDestinationRequest
) -> Pin<Box<dyn Future<Output = Result<ListCustomRoutingPortMappingsByDestinationResponse, RusotoError<ListCustomRoutingPortMappingsByDestinationError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

List the port mappings for a specific EC2 instance (destination) in a VPC subnet endpoint. The response is the mappings for one destination IP address. This is useful when your subnet endpoint has mappings that span multiple custom routing accelerators in your account, or for scenarios where you only want to list the port mappings for a specific destination instance.

#[must_use]pub fn list_endpoint_groups<'life0, 'async_trait>(
    &'life0 self,
    input: ListEndpointGroupsRequest
) -> Pin<Box<dyn Future<Output = Result<ListEndpointGroupsResponse, RusotoError<ListEndpointGroupsError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

List the endpoint groups that are associated with a listener.

#[must_use]pub fn list_listeners<'life0, 'async_trait>(
    &'life0 self,
    input: ListListenersRequest
) -> Pin<Box<dyn Future<Output = Result<ListListenersResponse, RusotoError<ListListenersError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

List the listeners for an accelerator.

#[must_use]pub fn list_tags_for_resource<'life0, 'async_trait>(
    &'life0 self,
    input: ListTagsForResourceRequest
) -> Pin<Box<dyn Future<Output = Result<ListTagsForResourceResponse, RusotoError<ListTagsForResourceError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

List all tags for an accelerator.

For more information, see Tagging in AWS Global Accelerator in the AWS Global Accelerator Developer Guide.

#[must_use]pub fn provision_byoip_cidr<'life0, 'async_trait>(
    &'life0 self,
    input: ProvisionByoipCidrRequest
) -> Pin<Box<dyn Future<Output = Result<ProvisionByoipCidrResponse, RusotoError<ProvisionByoipCidrError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Provisions an IP address range to use with your AWS resources through bring your own IP addresses (BYOIP) and creates a corresponding address pool. After the address range is provisioned, it is ready to be advertised using AdvertiseByoipCidr.

For more information, see Bring Your Own IP Addresses (BYOIP) in the AWS Global Accelerator Developer Guide.

#[must_use]pub fn remove_custom_routing_endpoints<'life0, 'async_trait>(
    &'life0 self,
    input: RemoveCustomRoutingEndpointsRequest
) -> Pin<Box<dyn Future<Output = Result<(), RusotoError<RemoveCustomRoutingEndpointsError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Remove endpoints from a custom routing accelerator.

#[must_use]pub fn tag_resource<'life0, 'async_trait>(
    &'life0 self,
    input: TagResourceRequest
) -> Pin<Box<dyn Future<Output = Result<TagResourceResponse, RusotoError<TagResourceError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Add tags to an accelerator resource.

For more information, see Tagging in AWS Global Accelerator in the AWS Global Accelerator Developer Guide.

#[must_use]pub fn untag_resource<'life0, 'async_trait>(
    &'life0 self,
    input: UntagResourceRequest
) -> Pin<Box<dyn Future<Output = Result<UntagResourceResponse, RusotoError<UntagResourceError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Remove tags from a Global Accelerator resource. When you specify a tag key, the action removes both that key and its associated value. The operation succeeds even if you attempt to remove tags from an accelerator that was already removed.

For more information, see Tagging in AWS Global Accelerator in the AWS Global Accelerator Developer Guide.

#[must_use]pub fn update_accelerator<'life0, 'async_trait>(
    &'life0 self,
    input: UpdateAcceleratorRequest
) -> Pin<Box<dyn Future<Output = Result<UpdateAcceleratorResponse, RusotoError<UpdateAcceleratorError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Update an accelerator.

Global Accelerator is a global service that supports endpoints in multiple AWS Regions but you must specify the US West (Oregon) Region to create or update accelerators.

#[must_use]pub fn update_accelerator_attributes<'life0, 'async_trait>(
    &'life0 self,
    input: UpdateAcceleratorAttributesRequest
) -> Pin<Box<dyn Future<Output = Result<UpdateAcceleratorAttributesResponse, RusotoError<UpdateAcceleratorAttributesError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Update the attributes for an accelerator.

#[must_use]pub fn update_custom_routing_accelerator<'life0, 'async_trait>(
    &'life0 self,
    input: UpdateCustomRoutingAcceleratorRequest
) -> Pin<Box<dyn Future<Output = Result<UpdateCustomRoutingAcceleratorResponse, RusotoError<UpdateCustomRoutingAcceleratorError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Update a custom routing accelerator.

#[must_use]pub fn update_custom_routing_accelerator_attributes<'life0, 'async_trait>(
    &'life0 self,
    input: UpdateCustomRoutingAcceleratorAttributesRequest
) -> Pin<Box<dyn Future<Output = Result<UpdateCustomRoutingAcceleratorAttributesResponse, RusotoError<UpdateCustomRoutingAcceleratorAttributesError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Update the attributes for a custom routing accelerator.

#[must_use]pub fn update_custom_routing_listener<'life0, 'async_trait>(
    &'life0 self,
    input: UpdateCustomRoutingListenerRequest
) -> Pin<Box<dyn Future<Output = Result<UpdateCustomRoutingListenerResponse, RusotoError<UpdateCustomRoutingListenerError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Update a listener for a custom routing accelerator.

#[must_use]pub fn update_endpoint_group<'life0, 'async_trait>(
    &'life0 self,
    input: UpdateEndpointGroupRequest
) -> Pin<Box<dyn Future<Output = Result<UpdateEndpointGroupResponse, RusotoError<UpdateEndpointGroupError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Update an endpoint group. A resource must be valid and active when you add it as an endpoint.

#[must_use]pub fn update_listener<'life0, 'async_trait>(
    &'life0 self,
    input: UpdateListenerRequest
) -> Pin<Box<dyn Future<Output = Result<UpdateListenerResponse, RusotoError<UpdateListenerError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Update a listener.

#[must_use]pub fn withdraw_byoip_cidr<'life0, 'async_trait>(
    &'life0 self,
    input: WithdrawByoipCidrRequest
) -> Pin<Box<dyn Future<Output = Result<WithdrawByoipCidrResponse, RusotoError<WithdrawByoipCidrError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Stops advertising an address range that is provisioned as an address pool. You can perform this operation at most once every 10 seconds, even if you specify different address ranges each time.

It can take a few minutes before traffic to the specified addresses stops routing to AWS because of propagation delays.

For more information, see Bring Your Own IP Addresses (BYOIP) in the AWS Global Accelerator Developer Guide.

Loading content...

Implementors

impl GlobalAccelerator for GlobalAcceleratorClient

pub fn add_custom_routing_endpoints<'life0, 'async_trait>(
    &'life0 self,
    input: AddCustomRoutingEndpointsRequest
) -> Pin<Box<dyn Future<Output = Result<AddCustomRoutingEndpointsResponse, RusotoError<AddCustomRoutingEndpointsError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Associate a virtual private cloud (VPC) subnet endpoint with your custom routing accelerator.

The listener port range must be large enough to support the number of IP addresses that can be specified in your subnet. The number of ports required is: subnet size times the number of ports per destination EC2 instances. For example, a subnet defined as /24 requires a listener port range of at least 255 ports.

Note: You must have enough remaining listener ports available to map to the subnet ports, or the call will fail with a LimitExceededException.

By default, all destinations in a subnet in a custom routing accelerator cannot receive traffic. To enable all destinations to receive traffic, or to specify individual port mappings that can receive traffic, see the AllowCustomRoutingTraffic operation.

pub fn advertise_byoip_cidr<'life0, 'async_trait>(
    &'life0 self,
    input: AdvertiseByoipCidrRequest
) -> Pin<Box<dyn Future<Output = Result<AdvertiseByoipCidrResponse, RusotoError<AdvertiseByoipCidrError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Advertises an IPv4 address range that is provisioned for use with your AWS resources through bring your own IP addresses (BYOIP). It can take a few minutes before traffic to the specified addresses starts routing to AWS because of propagation delays.

To stop advertising the BYOIP address range, use WithdrawByoipCidr.

For more information, see Bring Your Own IP Addresses (BYOIP) in the AWS Global Accelerator Developer Guide.

pub fn allow_custom_routing_traffic<'life0, 'async_trait>(
    &'life0 self,
    input: AllowCustomRoutingTrafficRequest
) -> Pin<Box<dyn Future<Output = Result<(), RusotoError<AllowCustomRoutingTrafficError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Specify the Amazon EC2 instance (destination) IP addresses and ports for a VPC subnet endpoint that can receive traffic for a custom routing accelerator. You can allow traffic to all destinations in the subnet endpoint, or allow traffic to a specified list of destination IP addresses and ports in the subnet. Note that you cannot specify IP addresses or ports outside of the range that you configured for the endpoint group.

After you make changes, you can verify that the updates are complete by checking the status of your accelerator: the status changes from IN_PROGRESS to DEPLOYED.

pub fn create_accelerator<'life0, 'async_trait>(
    &'life0 self,
    input: CreateAcceleratorRequest
) -> Pin<Box<dyn Future<Output = Result<CreateAcceleratorResponse, RusotoError<CreateAcceleratorError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Create an accelerator. An accelerator includes one or more listeners that process inbound connections and direct traffic to one or more endpoint groups, each of which includes endpoints, such as Network Load Balancers.

Global Accelerator is a global service that supports endpoints in multiple AWS Regions but you must specify the US West (Oregon) Region to create or update accelerators.

pub fn create_custom_routing_accelerator<'life0, 'async_trait>(
    &'life0 self,
    input: CreateCustomRoutingAcceleratorRequest
) -> Pin<Box<dyn Future<Output = Result<CreateCustomRoutingAcceleratorResponse, RusotoError<CreateCustomRoutingAcceleratorError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Create a custom routing accelerator. A custom routing accelerator directs traffic to one of possibly thousands of Amazon EC2 instance destinations running in a single or multiple virtual private clouds (VPC) subnet endpoints.

Be aware that, by default, all destination EC2 instances in a VPC subnet endpoint cannot receive traffic. To enable all destinations to receive traffic, or to specify individual port mappings that can receive traffic, see the AllowCustomRoutingTraffic operation.

pub fn create_custom_routing_endpoint_group<'life0, 'async_trait>(
    &'life0 self,
    input: CreateCustomRoutingEndpointGroupRequest
) -> Pin<Box<dyn Future<Output = Result<CreateCustomRoutingEndpointGroupResponse, RusotoError<CreateCustomRoutingEndpointGroupError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Create an endpoint group for the specified listener for a custom routing accelerator. An endpoint group is a collection of endpoints in one AWS Region.

pub fn create_custom_routing_listener<'life0, 'async_trait>(
    &'life0 self,
    input: CreateCustomRoutingListenerRequest
) -> Pin<Box<dyn Future<Output = Result<CreateCustomRoutingListenerResponse, RusotoError<CreateCustomRoutingListenerError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Create a listener to process inbound connections from clients to a custom routing accelerator. Connections arrive to assigned static IP addresses on the port range that you specify.

pub fn create_endpoint_group<'life0, 'async_trait>(
    &'life0 self,
    input: CreateEndpointGroupRequest
) -> Pin<Box<dyn Future<Output = Result<CreateEndpointGroupResponse, RusotoError<CreateEndpointGroupError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Create an endpoint group for the specified listener. An endpoint group is a collection of endpoints in one AWS Region. A resource must be valid and active when you add it as an endpoint.

pub fn create_listener<'life0, 'async_trait>(
    &'life0 self,
    input: CreateListenerRequest
) -> Pin<Box<dyn Future<Output = Result<CreateListenerResponse, RusotoError<CreateListenerError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Create a listener to process inbound connections from clients to an accelerator. Connections arrive to assigned static IP addresses on a port, port range, or list of port ranges that you specify.

pub fn delete_accelerator<'life0, 'async_trait>(
    &'life0 self,
    input: DeleteAcceleratorRequest
) -> Pin<Box<dyn Future<Output = Result<(), RusotoError<DeleteAcceleratorError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Delete an accelerator. Before you can delete an accelerator, you must disable it and remove all dependent resources (listeners and endpoint groups). To disable the accelerator, update the accelerator to set Enabled to false.

When you create an accelerator, by default, Global Accelerator provides you with a set of two static IP addresses. Alternatively, you can bring your own IP address ranges to Global Accelerator and assign IP addresses from those ranges.

The IP addresses are assigned to your accelerator for as long as it exists, even if you disable the accelerator and it no longer accepts or routes traffic. However, when you delete an accelerator, you lose the static IP addresses that are assigned to the accelerator, so you can no longer route traffic by using them. As a best practice, ensure that you have permissions in place to avoid inadvertently deleting accelerators. You can use IAM policies with Global Accelerator to limit the users who have permissions to delete an accelerator. For more information, see Authentication and Access Control in the AWS Global Accelerator Developer Guide.

pub fn delete_custom_routing_accelerator<'life0, 'async_trait>(
    &'life0 self,
    input: DeleteCustomRoutingAcceleratorRequest
) -> Pin<Box<dyn Future<Output = Result<(), RusotoError<DeleteCustomRoutingAcceleratorError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Delete a custom routing accelerator. Before you can delete an accelerator, you must disable it and remove all dependent resources (listeners and endpoint groups). To disable the accelerator, update the accelerator to set Enabled to false.

When you create a custom routing accelerator, by default, Global Accelerator provides you with a set of two static IP addresses.

The IP addresses are assigned to your accelerator for as long as it exists, even if you disable the accelerator and it no longer accepts or routes traffic. However, when you delete an accelerator, you lose the static IP addresses that are assigned to the accelerator, so you can no longer route traffic by using them. As a best practice, ensure that you have permissions in place to avoid inadvertently deleting accelerators. You can use IAM policies with Global Accelerator to limit the users who have permissions to delete an accelerator. For more information, see Authentication and Access Control in the AWS Global Accelerator Developer Guide.

pub fn delete_custom_routing_endpoint_group<'life0, 'async_trait>(
    &'life0 self,
    input: DeleteCustomRoutingEndpointGroupRequest
) -> Pin<Box<dyn Future<Output = Result<(), RusotoError<DeleteCustomRoutingEndpointGroupError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Delete an endpoint group from a listener for a custom routing accelerator.

pub fn delete_custom_routing_listener<'life0, 'async_trait>(
    &'life0 self,
    input: DeleteCustomRoutingListenerRequest
) -> Pin<Box<dyn Future<Output = Result<(), RusotoError<DeleteCustomRoutingListenerError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Delete a listener for a custom routing accelerator.

pub fn delete_endpoint_group<'life0, 'async_trait>(
    &'life0 self,
    input: DeleteEndpointGroupRequest
) -> Pin<Box<dyn Future<Output = Result<(), RusotoError<DeleteEndpointGroupError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Delete an endpoint group from a listener.

pub fn delete_listener<'life0, 'async_trait>(
    &'life0 self,
    input: DeleteListenerRequest
) -> Pin<Box<dyn Future<Output = Result<(), RusotoError<DeleteListenerError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Delete a listener from an accelerator.

pub fn deny_custom_routing_traffic<'life0, 'async_trait>(
    &'life0 self,
    input: DenyCustomRoutingTrafficRequest
) -> Pin<Box<dyn Future<Output = Result<(), RusotoError<DenyCustomRoutingTrafficError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Specify the Amazon EC2 instance (destination) IP addresses and ports for a VPC subnet endpoint that cannot receive traffic for a custom routing accelerator. You can deny traffic to all destinations in the VPC endpoint, or deny traffic to a specified list of destination IP addresses and ports. Note that you cannot specify IP addresses or ports outside of the range that you configured for the endpoint group.

After you make changes, you can verify that the updates are complete by checking the status of your accelerator: the status changes from IN_PROGRESS to DEPLOYED.

pub fn deprovision_byoip_cidr<'life0, 'async_trait>(
    &'life0 self,
    input: DeprovisionByoipCidrRequest
) -> Pin<Box<dyn Future<Output = Result<DeprovisionByoipCidrResponse, RusotoError<DeprovisionByoipCidrError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Releases the specified address range that you provisioned to use with your AWS resources through bring your own IP addresses (BYOIP) and deletes the corresponding address pool.

Before you can release an address range, you must stop advertising it by using WithdrawByoipCidr and you must not have any accelerators that are using static IP addresses allocated from its address range.

For more information, see Bring Your Own IP Addresses (BYOIP) in the AWS Global Accelerator Developer Guide.

pub fn describe_accelerator<'life0, 'async_trait>(
    &'life0 self,
    input: DescribeAcceleratorRequest
) -> Pin<Box<dyn Future<Output = Result<DescribeAcceleratorResponse, RusotoError<DescribeAcceleratorError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Describe an accelerator.

pub fn describe_accelerator_attributes<'life0, 'async_trait>(
    &'life0 self,
    input: DescribeAcceleratorAttributesRequest
) -> Pin<Box<dyn Future<Output = Result<DescribeAcceleratorAttributesResponse, RusotoError<DescribeAcceleratorAttributesError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Describe the attributes of an accelerator.

pub fn describe_custom_routing_accelerator<'life0, 'async_trait>(
    &'life0 self,
    input: DescribeCustomRoutingAcceleratorRequest
) -> Pin<Box<dyn Future<Output = Result<DescribeCustomRoutingAcceleratorResponse, RusotoError<DescribeCustomRoutingAcceleratorError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Describe a custom routing accelerator.

pub fn describe_custom_routing_accelerator_attributes<'life0, 'async_trait>(
    &'life0 self,
    input: DescribeCustomRoutingAcceleratorAttributesRequest
) -> Pin<Box<dyn Future<Output = Result<DescribeCustomRoutingAcceleratorAttributesResponse, RusotoError<DescribeCustomRoutingAcceleratorAttributesError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Describe the attributes of a custom routing accelerator.

pub fn describe_custom_routing_endpoint_group<'life0, 'async_trait>(
    &'life0 self,
    input: DescribeCustomRoutingEndpointGroupRequest
) -> Pin<Box<dyn Future<Output = Result<DescribeCustomRoutingEndpointGroupResponse, RusotoError<DescribeCustomRoutingEndpointGroupError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Describe an endpoint group for a custom routing accelerator.

pub fn describe_custom_routing_listener<'life0, 'async_trait>(
    &'life0 self,
    input: DescribeCustomRoutingListenerRequest
) -> Pin<Box<dyn Future<Output = Result<DescribeCustomRoutingListenerResponse, RusotoError<DescribeCustomRoutingListenerError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

The description of a listener for a custom routing accelerator.

pub fn describe_endpoint_group<'life0, 'async_trait>(
    &'life0 self,
    input: DescribeEndpointGroupRequest
) -> Pin<Box<dyn Future<Output = Result<DescribeEndpointGroupResponse, RusotoError<DescribeEndpointGroupError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Describe an endpoint group.

pub fn describe_listener<'life0, 'async_trait>(
    &'life0 self,
    input: DescribeListenerRequest
) -> Pin<Box<dyn Future<Output = Result<DescribeListenerResponse, RusotoError<DescribeListenerError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Describe a listener.

pub fn list_accelerators<'life0, 'async_trait>(
    &'life0 self,
    input: ListAcceleratorsRequest
) -> Pin<Box<dyn Future<Output = Result<ListAcceleratorsResponse, RusotoError<ListAcceleratorsError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

List the accelerators for an AWS account.

pub fn list_byoip_cidrs<'life0, 'async_trait>(
    &'life0 self,
    input: ListByoipCidrsRequest
) -> Pin<Box<dyn Future<Output = Result<ListByoipCidrsResponse, RusotoError<ListByoipCidrsError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Lists the IP address ranges that were specified in calls to ProvisionByoipCidr, including the current state and a history of state changes.

pub fn list_custom_routing_accelerators<'life0, 'async_trait>(
    &'life0 self,
    input: ListCustomRoutingAcceleratorsRequest
) -> Pin<Box<dyn Future<Output = Result<ListCustomRoutingAcceleratorsResponse, RusotoError<ListCustomRoutingAcceleratorsError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

List the custom routing accelerators for an AWS account.

pub fn list_custom_routing_endpoint_groups<'life0, 'async_trait>(
    &'life0 self,
    input: ListCustomRoutingEndpointGroupsRequest
) -> Pin<Box<dyn Future<Output = Result<ListCustomRoutingEndpointGroupsResponse, RusotoError<ListCustomRoutingEndpointGroupsError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

List the endpoint groups that are associated with a listener for a custom routing accelerator.

pub fn list_custom_routing_listeners<'life0, 'async_trait>(
    &'life0 self,
    input: ListCustomRoutingListenersRequest
) -> Pin<Box<dyn Future<Output = Result<ListCustomRoutingListenersResponse, RusotoError<ListCustomRoutingListenersError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

List the listeners for a custom routing accelerator.

pub fn list_custom_routing_port_mappings<'life0, 'async_trait>(
    &'life0 self,
    input: ListCustomRoutingPortMappingsRequest
) -> Pin<Box<dyn Future<Output = Result<ListCustomRoutingPortMappingsResponse, RusotoError<ListCustomRoutingPortMappingsError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Provides a complete mapping from the public accelerator IP address and port to destination EC2 instance IP addresses and ports in the virtual public cloud (VPC) subnet endpoint for a custom routing accelerator. For each subnet endpoint that you add, Global Accelerator creates a new static port mapping for the accelerator. The port mappings don't change after Global Accelerator generates them, so you can retrieve and cache the full mapping on your servers.

If you remove a subnet from your accelerator, Global Accelerator removes (reclaims) the port mappings. If you add a subnet to your accelerator, Global Accelerator creates new port mappings (the existing ones don't change). If you add or remove EC2 instances in your subnet, the port mappings don't change, because the mappings are created when you add the subnet to Global Accelerator.

The mappings also include a flag for each destination denoting which destination IP addresses and ports are allowed or denied traffic.

pub fn list_custom_routing_port_mappings_by_destination<'life0, 'async_trait>(
    &'life0 self,
    input: ListCustomRoutingPortMappingsByDestinationRequest
) -> Pin<Box<dyn Future<Output = Result<ListCustomRoutingPortMappingsByDestinationResponse, RusotoError<ListCustomRoutingPortMappingsByDestinationError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

List the port mappings for a specific EC2 instance (destination) in a VPC subnet endpoint. The response is the mappings for one destination IP address. This is useful when your subnet endpoint has mappings that span multiple custom routing accelerators in your account, or for scenarios where you only want to list the port mappings for a specific destination instance.

pub fn list_endpoint_groups<'life0, 'async_trait>(
    &'life0 self,
    input: ListEndpointGroupsRequest
) -> Pin<Box<dyn Future<Output = Result<ListEndpointGroupsResponse, RusotoError<ListEndpointGroupsError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

List the endpoint groups that are associated with a listener.

pub fn list_listeners<'life0, 'async_trait>(
    &'life0 self,
    input: ListListenersRequest
) -> Pin<Box<dyn Future<Output = Result<ListListenersResponse, RusotoError<ListListenersError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

List the listeners for an accelerator.

pub fn list_tags_for_resource<'life0, 'async_trait>(
    &'life0 self,
    input: ListTagsForResourceRequest
) -> Pin<Box<dyn Future<Output = Result<ListTagsForResourceResponse, RusotoError<ListTagsForResourceError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

List all tags for an accelerator.

For more information, see Tagging in AWS Global Accelerator in the AWS Global Accelerator Developer Guide.

pub fn provision_byoip_cidr<'life0, 'async_trait>(
    &'life0 self,
    input: ProvisionByoipCidrRequest
) -> Pin<Box<dyn Future<Output = Result<ProvisionByoipCidrResponse, RusotoError<ProvisionByoipCidrError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Provisions an IP address range to use with your AWS resources through bring your own IP addresses (BYOIP) and creates a corresponding address pool. After the address range is provisioned, it is ready to be advertised using AdvertiseByoipCidr.

For more information, see Bring Your Own IP Addresses (BYOIP) in the AWS Global Accelerator Developer Guide.

pub fn remove_custom_routing_endpoints<'life0, 'async_trait>(
    &'life0 self,
    input: RemoveCustomRoutingEndpointsRequest
) -> Pin<Box<dyn Future<Output = Result<(), RusotoError<RemoveCustomRoutingEndpointsError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Remove endpoints from a custom routing accelerator.

pub fn tag_resource<'life0, 'async_trait>(
    &'life0 self,
    input: TagResourceRequest
) -> Pin<Box<dyn Future<Output = Result<TagResourceResponse, RusotoError<TagResourceError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Add tags to an accelerator resource.

For more information, see Tagging in AWS Global Accelerator in the AWS Global Accelerator Developer Guide.

pub fn untag_resource<'life0, 'async_trait>(
    &'life0 self,
    input: UntagResourceRequest
) -> Pin<Box<dyn Future<Output = Result<UntagResourceResponse, RusotoError<UntagResourceError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Remove tags from a Global Accelerator resource. When you specify a tag key, the action removes both that key and its associated value. The operation succeeds even if you attempt to remove tags from an accelerator that was already removed.

For more information, see Tagging in AWS Global Accelerator in the AWS Global Accelerator Developer Guide.

pub fn update_accelerator<'life0, 'async_trait>(
    &'life0 self,
    input: UpdateAcceleratorRequest
) -> Pin<Box<dyn Future<Output = Result<UpdateAcceleratorResponse, RusotoError<UpdateAcceleratorError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Update an accelerator.

Global Accelerator is a global service that supports endpoints in multiple AWS Regions but you must specify the US West (Oregon) Region to create or update accelerators.

pub fn update_accelerator_attributes<'life0, 'async_trait>(
    &'life0 self,
    input: UpdateAcceleratorAttributesRequest
) -> Pin<Box<dyn Future<Output = Result<UpdateAcceleratorAttributesResponse, RusotoError<UpdateAcceleratorAttributesError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Update the attributes for an accelerator.

pub fn update_custom_routing_accelerator<'life0, 'async_trait>(
    &'life0 self,
    input: UpdateCustomRoutingAcceleratorRequest
) -> Pin<Box<dyn Future<Output = Result<UpdateCustomRoutingAcceleratorResponse, RusotoError<UpdateCustomRoutingAcceleratorError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Update a custom routing accelerator.

pub fn update_custom_routing_accelerator_attributes<'life0, 'async_trait>(
    &'life0 self,
    input: UpdateCustomRoutingAcceleratorAttributesRequest
) -> Pin<Box<dyn Future<Output = Result<UpdateCustomRoutingAcceleratorAttributesResponse, RusotoError<UpdateCustomRoutingAcceleratorAttributesError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Update the attributes for a custom routing accelerator.

pub fn update_custom_routing_listener<'life0, 'async_trait>(
    &'life0 self,
    input: UpdateCustomRoutingListenerRequest
) -> Pin<Box<dyn Future<Output = Result<UpdateCustomRoutingListenerResponse, RusotoError<UpdateCustomRoutingListenerError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Update a listener for a custom routing accelerator.

pub fn update_endpoint_group<'life0, 'async_trait>(
    &'life0 self,
    input: UpdateEndpointGroupRequest
) -> Pin<Box<dyn Future<Output = Result<UpdateEndpointGroupResponse, RusotoError<UpdateEndpointGroupError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Update an endpoint group. A resource must be valid and active when you add it as an endpoint.

pub fn update_listener<'life0, 'async_trait>(
    &'life0 self,
    input: UpdateListenerRequest
) -> Pin<Box<dyn Future<Output = Result<UpdateListenerResponse, RusotoError<UpdateListenerError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Update a listener.

pub fn withdraw_byoip_cidr<'life0, 'async_trait>(
    &'life0 self,
    input: WithdrawByoipCidrRequest
) -> Pin<Box<dyn Future<Output = Result<WithdrawByoipCidrResponse, RusotoError<WithdrawByoipCidrError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, 

Stops advertising an address range that is provisioned as an address pool. You can perform this operation at most once every 10 seconds, even if you specify different address ranges each time.

It can take a few minutes before traffic to the specified addresses stops routing to AWS because of propagation delays.

For more information, see Bring Your Own IP Addresses (BYOIP) in the AWS Global Accelerator Developer Guide.

Loading content...