[−][src]Trait rusoto_acm::Acm

pub trait Acm {
#[must_use]    pub fn add_tags_to_certificate<'life0, 'async_trait>(
        &'life0 self, 
        input: AddTagsToCertificateRequest
    ) -> Pin<Box<dyn Future<Output = Result<(), RusotoError<AddTagsToCertificateError>>> + Send + 'async_trait>>
    where
        'life0: 'async_trait,
        Self: 'async_trait;

#[must_use]    pub fn delete_certificate<'life0, 'async_trait>(
        &'life0 self, 
        input: DeleteCertificateRequest
    ) -> Pin<Box<dyn Future<Output = Result<(), RusotoError<DeleteCertificateError>>> + Send + 'async_trait>>
    where
        'life0: 'async_trait,
        Self: 'async_trait;

#[must_use]    pub fn describe_certificate<'life0, 'async_trait>(
        &'life0 self, 
        input: DescribeCertificateRequest
    ) -> Pin<Box<dyn Future<Output = Result<DescribeCertificateResponse, RusotoError<DescribeCertificateError>>> + Send + 'async_trait>>
    where
        'life0: 'async_trait,
        Self: 'async_trait;

#[must_use]    pub fn export_certificate<'life0, 'async_trait>(
        &'life0 self, 
        input: ExportCertificateRequest
    ) -> Pin<Box<dyn Future<Output = Result<ExportCertificateResponse, RusotoError<ExportCertificateError>>> + Send + 'async_trait>>
    where
        'life0: 'async_trait,
        Self: 'async_trait;

#[must_use]    pub fn get_certificate<'life0, 'async_trait>(
        &'life0 self, 
        input: GetCertificateRequest
    ) -> Pin<Box<dyn Future<Output = Result<GetCertificateResponse, RusotoError<GetCertificateError>>> + Send + 'async_trait>>
    where
        'life0: 'async_trait,
        Self: 'async_trait;

#[must_use]    pub fn import_certificate<'life0, 'async_trait>(
        &'life0 self, 
        input: ImportCertificateRequest
    ) -> Pin<Box<dyn Future<Output = Result<ImportCertificateResponse, RusotoError<ImportCertificateError>>> + Send + 'async_trait>>
    where
        'life0: 'async_trait,
        Self: 'async_trait;

#[must_use]    pub fn list_certificates<'life0, 'async_trait>(
        &'life0 self, 
        input: ListCertificatesRequest
    ) -> Pin<Box<dyn Future<Output = Result<ListCertificatesResponse, RusotoError<ListCertificatesError>>> + Send + 'async_trait>>
    where
        'life0: 'async_trait,
        Self: 'async_trait;

#[must_use]    pub fn list_tags_for_certificate<'life0, 'async_trait>(
        &'life0 self, 
        input: ListTagsForCertificateRequest
    ) -> Pin<Box<dyn Future<Output = Result<ListTagsForCertificateResponse, RusotoError<ListTagsForCertificateError>>> + Send + 'async_trait>>
    where
        'life0: 'async_trait,
        Self: 'async_trait;

#[must_use]    pub fn remove_tags_from_certificate<'life0, 'async_trait>(
        &'life0 self, 
        input: RemoveTagsFromCertificateRequest
    ) -> Pin<Box<dyn Future<Output = Result<(), RusotoError<RemoveTagsFromCertificateError>>> + Send + 'async_trait>>
    where
        'life0: 'async_trait,
        Self: 'async_trait;

#[must_use]    pub fn renew_certificate<'life0, 'async_trait>(
        &'life0 self, 
        input: RenewCertificateRequest
    ) -> Pin<Box<dyn Future<Output = Result<(), RusotoError<RenewCertificateError>>> + Send + 'async_trait>>
    where
        'life0: 'async_trait,
        Self: 'async_trait;

#[must_use]    pub fn request_certificate<'life0, 'async_trait>(
        &'life0 self, 
        input: RequestCertificateRequest
    ) -> Pin<Box<dyn Future<Output = Result<RequestCertificateResponse, RusotoError<RequestCertificateError>>> + Send + 'async_trait>>
    where
        'life0: 'async_trait,
        Self: 'async_trait;

#[must_use]    pub fn resend_validation_email<'life0, 'async_trait>(
        &'life0 self, 
        input: ResendValidationEmailRequest
    ) -> Pin<Box<dyn Future<Output = Result<(), RusotoError<ResendValidationEmailError>>> + Send + 'async_trait>>
    where
        'life0: 'async_trait,
        Self: 'async_trait;

#[must_use]    pub fn update_certificate_options<'life0, 'async_trait>(
        &'life0 self, 
        input: UpdateCertificateOptionsRequest
    ) -> Pin<Box<dyn Future<Output = Result<(), RusotoError<UpdateCertificateOptionsError>>> + Send + 'async_trait>>
    where
        'life0: 'async_trait,
        Self: 'async_trait;
}

Trait representing the capabilities of the ACM API. ACM clients implement this trait.

Required methods

#[must_use]pub fn add_tags_to_certificate<'life0, 'async_trait>(
    &'life0 self,
    input: AddTagsToCertificateRequest
) -> Pin<Box<dyn Future<Output = Result<(), RusotoError<AddTagsToCertificateError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, [src]

Adds one or more tags to an ACM certificate. Tags are labels that you can use to identify and organize your AWS resources. Each tag consists of a key and an optional value. You specify the certificate on input by its Amazon Resource Name (ARN). You specify the tag by using a key-value pair.

You can apply a tag to just one certificate if you want to identify a specific characteristic of that certificate, or you can apply the same tag to multiple certificates if you want to filter for a common relationship among those certificates. Similarly, you can apply the same tag to multiple resources if you want to specify a relationship among those resources. For example, you can add the same tag to an ACM certificate and an Elastic Load Balancing load balancer to indicate that they are both used by the same website. For more information, see Tagging ACM certificates.

To remove one or more tags, use the RemoveTagsFromCertificate action. To view all of the tags that have been applied to the certificate, use the ListTagsForCertificate action.

#[must_use]pub fn delete_certificate<'life0, 'async_trait>(
    &'life0 self,
    input: DeleteCertificateRequest
) -> Pin<Box<dyn Future<Output = Result<(), RusotoError<DeleteCertificateError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, [src]

Deletes a certificate and its associated private key. If this action succeeds, the certificate no longer appears in the list that can be displayed by calling the ListCertificates action or be retrieved by calling the GetCertificate action. The certificate will not be available for use by AWS services integrated with ACM.

You cannot delete an ACM certificate that is being used by another AWS service. To delete a certificate that is in use, the certificate association must first be removed.

#[must_use]pub fn describe_certificate<'life0, 'async_trait>(
    &'life0 self,
    input: DescribeCertificateRequest
) -> Pin<Box<dyn Future<Output = Result<DescribeCertificateResponse, RusotoError<DescribeCertificateError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, [src]

Returns detailed metadata about the specified ACM certificate.

#[must_use]pub fn export_certificate<'life0, 'async_trait>(
    &'life0 self,
    input: ExportCertificateRequest
) -> Pin<Box<dyn Future<Output = Result<ExportCertificateResponse, RusotoError<ExportCertificateError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, [src]

Exports a private certificate issued by a private certificate authority (CA) for use anywhere. The exported file contains the certificate, the certificate chain, and the encrypted private 2048-bit RSA key associated with the public key that is embedded in the certificate. For security, you must assign a passphrase for the private key when exporting it.

For information about exporting and formatting a certificate using the ACM console or CLI, see Export a Private Certificate.

#[must_use]pub fn get_certificate<'life0, 'async_trait>(
    &'life0 self,
    input: GetCertificateRequest
) -> Pin<Box<dyn Future<Output = Result<GetCertificateResponse, RusotoError<GetCertificateError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, [src]

Retrieves an Amazon-issued certificate and its certificate chain. The chain consists of the certificate of the issuing CA and the intermediate certificates of any other subordinate CAs. All of the certificates are base64 encoded. You can use OpenSSL to decode the certificates and inspect individual fields.

#[must_use]pub fn import_certificate<'life0, 'async_trait>(
    &'life0 self,
    input: ImportCertificateRequest
) -> Pin<Box<dyn Future<Output = Result<ImportCertificateResponse, RusotoError<ImportCertificateError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, [src]

Imports a certificate into AWS Certificate Manager (ACM) to use with services that are integrated with ACM. Note that integrated services allow only certificate types and keys they support to be associated with their resources. Further, their support differs depending on whether the certificate is imported into IAM or into ACM. For more information, see the documentation for each service. For more information about importing certificates into ACM, see Importing Certificates in the AWS Certificate Manager User Guide.

ACM does not provide managed renewal for certificates that you import.

Note the following guidelines when importing third party certificates:

  • You must enter the private key that matches the certificate you are importing.

  • The private key must be unencrypted. You cannot import a private key that is protected by a password or a passphrase.

  • If the certificate you are importing is not self-signed, you must enter its certificate chain.

  • If a certificate chain is included, the issuer must be the subject of one of the certificates in the chain.

  • The certificate, private key, and certificate chain must be PEM-encoded.

  • The current time must be between the Not Before and Not After certificate fields.

  • The Issuer field must not be empty.

  • The OCSP authority URL, if present, must not exceed 1000 characters.

  • To import a new certificate, omit the CertificateArn argument. Include this argument only when you want to replace a previously imported certifica

  • When you import a certificate by using the CLI, you must specify the certificate, the certificate chain, and the private key by their file names preceded by file://. For example, you can specify a certificate saved in the C:\temp folder as file://C:\temp\certificate_to_import.pem. If you are making an HTTP or HTTPS Query request, include these arguments as BLOBs.

  • When you import a certificate by using an SDK, you must specify the certificate, the certificate chain, and the private key files in the manner required by the programming language you're using.

  • The cryptographic algorithm of an imported certificate must match the algorithm of the signing CA. For example, if the signing CA key type is RSA, then the certificate key type must also be RSA.

This operation returns the Amazon Resource Name (ARN) of the imported certificate.

#[must_use]pub fn list_certificates<'life0, 'async_trait>(
    &'life0 self,
    input: ListCertificatesRequest
) -> Pin<Box<dyn Future<Output = Result<ListCertificatesResponse, RusotoError<ListCertificatesError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, [src]

Retrieves a list of certificate ARNs and domain names. You can request that only certificates that match a specific status be listed. You can also filter by specific attributes of the certificate. Default filtering returns only RSA_2048 certificates. For more information, see Filters.

#[must_use]pub fn list_tags_for_certificate<'life0, 'async_trait>(
    &'life0 self,
    input: ListTagsForCertificateRequest
) -> Pin<Box<dyn Future<Output = Result<ListTagsForCertificateResponse, RusotoError<ListTagsForCertificateError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, [src]

Lists the tags that have been applied to the ACM certificate. Use the certificate's Amazon Resource Name (ARN) to specify the certificate. To add a tag to an ACM certificate, use the AddTagsToCertificate action. To delete a tag, use the RemoveTagsFromCertificate action.

#[must_use]pub fn remove_tags_from_certificate<'life0, 'async_trait>(
    &'life0 self,
    input: RemoveTagsFromCertificateRequest
) -> Pin<Box<dyn Future<Output = Result<(), RusotoError<RemoveTagsFromCertificateError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, [src]

Remove one or more tags from an ACM certificate. A tag consists of a key-value pair. If you do not specify the value portion of the tag when calling this function, the tag will be removed regardless of value. If you specify a value, the tag is removed only if it is associated with the specified value.

To add tags to a certificate, use the AddTagsToCertificate action. To view all of the tags that have been applied to a specific ACM certificate, use the ListTagsForCertificate action.

#[must_use]pub fn renew_certificate<'life0, 'async_trait>(
    &'life0 self,
    input: RenewCertificateRequest
) -> Pin<Box<dyn Future<Output = Result<(), RusotoError<RenewCertificateError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, [src]

Renews an eligable ACM certificate. At this time, only exported private certificates can be renewed with this operation. In order to renew your ACM PCA certificates with ACM, you must first grant the ACM service principal permission to do so. For more information, see Testing Managed Renewal in the ACM User Guide.

#[must_use]pub fn request_certificate<'life0, 'async_trait>(
    &'life0 self,
    input: RequestCertificateRequest
) -> Pin<Box<dyn Future<Output = Result<RequestCertificateResponse, RusotoError<RequestCertificateError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, [src]

Requests an ACM certificate for use with other AWS services. To request an ACM certificate, you must specify a fully qualified domain name (FQDN) in the DomainName parameter. You can also specify additional FQDNs in the SubjectAlternativeNames parameter.

If you are requesting a private certificate, domain validation is not required. If you are requesting a public certificate, each domain name that you specify must be validated to verify that you own or control the domain. You can use DNS validation or email validation. We recommend that you use DNS validation. ACM issues public certificates after receiving approval from the domain owner.

#[must_use]pub fn resend_validation_email<'life0, 'async_trait>(
    &'life0 self,
    input: ResendValidationEmailRequest
) -> Pin<Box<dyn Future<Output = Result<(), RusotoError<ResendValidationEmailError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, [src]

Resends the email that requests domain ownership validation. The domain owner or an authorized representative must approve the ACM certificate before it can be issued. The certificate can be approved by clicking a link in the mail to navigate to the Amazon certificate approval website and then clicking I Approve. However, the validation email can be blocked by spam filters. Therefore, if you do not receive the original mail, you can request that the mail be resent within 72 hours of requesting the ACM certificate. If more than 72 hours have elapsed since your original request or since your last attempt to resend validation mail, you must request a new certificate. For more information about setting up your contact email addresses, see Configure Email for your Domain.

#[must_use]pub fn update_certificate_options<'life0, 'async_trait>(
    &'life0 self,
    input: UpdateCertificateOptionsRequest
) -> Pin<Box<dyn Future<Output = Result<(), RusotoError<UpdateCertificateOptionsError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, [src]

Updates a certificate. Currently, you can use this function to specify whether to opt in to or out of recording your certificate in a certificate transparency log. For more information, see Opting Out of Certificate Transparency Logging.

Loading content...

Implementors

impl Acm for AcmClient[src]

pub fn add_tags_to_certificate<'life0, 'async_trait>(
    &'life0 self,
    input: AddTagsToCertificateRequest
) -> Pin<Box<dyn Future<Output = Result<(), RusotoError<AddTagsToCertificateError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, [src]

Adds one or more tags to an ACM certificate. Tags are labels that you can use to identify and organize your AWS resources. Each tag consists of a key and an optional value. You specify the certificate on input by its Amazon Resource Name (ARN). You specify the tag by using a key-value pair.

You can apply a tag to just one certificate if you want to identify a specific characteristic of that certificate, or you can apply the same tag to multiple certificates if you want to filter for a common relationship among those certificates. Similarly, you can apply the same tag to multiple resources if you want to specify a relationship among those resources. For example, you can add the same tag to an ACM certificate and an Elastic Load Balancing load balancer to indicate that they are both used by the same website. For more information, see Tagging ACM certificates.

To remove one or more tags, use the RemoveTagsFromCertificate action. To view all of the tags that have been applied to the certificate, use the ListTagsForCertificate action.

pub fn delete_certificate<'life0, 'async_trait>(
    &'life0 self,
    input: DeleteCertificateRequest
) -> Pin<Box<dyn Future<Output = Result<(), RusotoError<DeleteCertificateError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, [src]

Deletes a certificate and its associated private key. If this action succeeds, the certificate no longer appears in the list that can be displayed by calling the ListCertificates action or be retrieved by calling the GetCertificate action. The certificate will not be available for use by AWS services integrated with ACM.

You cannot delete an ACM certificate that is being used by another AWS service. To delete a certificate that is in use, the certificate association must first be removed.

pub fn describe_certificate<'life0, 'async_trait>(
    &'life0 self,
    input: DescribeCertificateRequest
) -> Pin<Box<dyn Future<Output = Result<DescribeCertificateResponse, RusotoError<DescribeCertificateError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, [src]

Returns detailed metadata about the specified ACM certificate.

pub fn export_certificate<'life0, 'async_trait>(
    &'life0 self,
    input: ExportCertificateRequest
) -> Pin<Box<dyn Future<Output = Result<ExportCertificateResponse, RusotoError<ExportCertificateError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, [src]

Exports a private certificate issued by a private certificate authority (CA) for use anywhere. The exported file contains the certificate, the certificate chain, and the encrypted private 2048-bit RSA key associated with the public key that is embedded in the certificate. For security, you must assign a passphrase for the private key when exporting it.

For information about exporting and formatting a certificate using the ACM console or CLI, see Export a Private Certificate.

pub fn get_certificate<'life0, 'async_trait>(
    &'life0 self,
    input: GetCertificateRequest
) -> Pin<Box<dyn Future<Output = Result<GetCertificateResponse, RusotoError<GetCertificateError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, [src]

Retrieves an Amazon-issued certificate and its certificate chain. The chain consists of the certificate of the issuing CA and the intermediate certificates of any other subordinate CAs. All of the certificates are base64 encoded. You can use OpenSSL to decode the certificates and inspect individual fields.

pub fn import_certificate<'life0, 'async_trait>(
    &'life0 self,
    input: ImportCertificateRequest
) -> Pin<Box<dyn Future<Output = Result<ImportCertificateResponse, RusotoError<ImportCertificateError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, [src]

Imports a certificate into AWS Certificate Manager (ACM) to use with services that are integrated with ACM. Note that integrated services allow only certificate types and keys they support to be associated with their resources. Further, their support differs depending on whether the certificate is imported into IAM or into ACM. For more information, see the documentation for each service. For more information about importing certificates into ACM, see Importing Certificates in the AWS Certificate Manager User Guide.

ACM does not provide managed renewal for certificates that you import.

Note the following guidelines when importing third party certificates:

  • You must enter the private key that matches the certificate you are importing.

  • The private key must be unencrypted. You cannot import a private key that is protected by a password or a passphrase.

  • If the certificate you are importing is not self-signed, you must enter its certificate chain.

  • If a certificate chain is included, the issuer must be the subject of one of the certificates in the chain.

  • The certificate, private key, and certificate chain must be PEM-encoded.

  • The current time must be between the Not Before and Not After certificate fields.

  • The Issuer field must not be empty.

  • The OCSP authority URL, if present, must not exceed 1000 characters.

  • To import a new certificate, omit the CertificateArn argument. Include this argument only when you want to replace a previously imported certifica

  • When you import a certificate by using the CLI, you must specify the certificate, the certificate chain, and the private key by their file names preceded by file://. For example, you can specify a certificate saved in the C:\temp folder as file://C:\temp\certificate_to_import.pem. If you are making an HTTP or HTTPS Query request, include these arguments as BLOBs.

  • When you import a certificate by using an SDK, you must specify the certificate, the certificate chain, and the private key files in the manner required by the programming language you're using.

  • The cryptographic algorithm of an imported certificate must match the algorithm of the signing CA. For example, if the signing CA key type is RSA, then the certificate key type must also be RSA.

This operation returns the Amazon Resource Name (ARN) of the imported certificate.

pub fn list_certificates<'life0, 'async_trait>(
    &'life0 self,
    input: ListCertificatesRequest
) -> Pin<Box<dyn Future<Output = Result<ListCertificatesResponse, RusotoError<ListCertificatesError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, [src]

Retrieves a list of certificate ARNs and domain names. You can request that only certificates that match a specific status be listed. You can also filter by specific attributes of the certificate. Default filtering returns only RSA_2048 certificates. For more information, see Filters.

pub fn list_tags_for_certificate<'life0, 'async_trait>(
    &'life0 self,
    input: ListTagsForCertificateRequest
) -> Pin<Box<dyn Future<Output = Result<ListTagsForCertificateResponse, RusotoError<ListTagsForCertificateError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, [src]

Lists the tags that have been applied to the ACM certificate. Use the certificate's Amazon Resource Name (ARN) to specify the certificate. To add a tag to an ACM certificate, use the AddTagsToCertificate action. To delete a tag, use the RemoveTagsFromCertificate action.

pub fn remove_tags_from_certificate<'life0, 'async_trait>(
    &'life0 self,
    input: RemoveTagsFromCertificateRequest
) -> Pin<Box<dyn Future<Output = Result<(), RusotoError<RemoveTagsFromCertificateError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, [src]

Remove one or more tags from an ACM certificate. A tag consists of a key-value pair. If you do not specify the value portion of the tag when calling this function, the tag will be removed regardless of value. If you specify a value, the tag is removed only if it is associated with the specified value.

To add tags to a certificate, use the AddTagsToCertificate action. To view all of the tags that have been applied to a specific ACM certificate, use the ListTagsForCertificate action.

pub fn renew_certificate<'life0, 'async_trait>(
    &'life0 self,
    input: RenewCertificateRequest
) -> Pin<Box<dyn Future<Output = Result<(), RusotoError<RenewCertificateError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, [src]

Renews an eligable ACM certificate. At this time, only exported private certificates can be renewed with this operation. In order to renew your ACM PCA certificates with ACM, you must first grant the ACM service principal permission to do so. For more information, see Testing Managed Renewal in the ACM User Guide.

pub fn request_certificate<'life0, 'async_trait>(
    &'life0 self,
    input: RequestCertificateRequest
) -> Pin<Box<dyn Future<Output = Result<RequestCertificateResponse, RusotoError<RequestCertificateError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, [src]

Requests an ACM certificate for use with other AWS services. To request an ACM certificate, you must specify a fully qualified domain name (FQDN) in the DomainName parameter. You can also specify additional FQDNs in the SubjectAlternativeNames parameter.

If you are requesting a private certificate, domain validation is not required. If you are requesting a public certificate, each domain name that you specify must be validated to verify that you own or control the domain. You can use DNS validation or email validation. We recommend that you use DNS validation. ACM issues public certificates after receiving approval from the domain owner.

pub fn resend_validation_email<'life0, 'async_trait>(
    &'life0 self,
    input: ResendValidationEmailRequest
) -> Pin<Box<dyn Future<Output = Result<(), RusotoError<ResendValidationEmailError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, [src]

Resends the email that requests domain ownership validation. The domain owner or an authorized representative must approve the ACM certificate before it can be issued. The certificate can be approved by clicking a link in the mail to navigate to the Amazon certificate approval website and then clicking I Approve. However, the validation email can be blocked by spam filters. Therefore, if you do not receive the original mail, you can request that the mail be resent within 72 hours of requesting the ACM certificate. If more than 72 hours have elapsed since your original request or since your last attempt to resend validation mail, you must request a new certificate. For more information about setting up your contact email addresses, see Configure Email for your Domain.

pub fn update_certificate_options<'life0, 'async_trait>(
    &'life0 self,
    input: UpdateCertificateOptionsRequest
) -> Pin<Box<dyn Future<Output = Result<(), RusotoError<UpdateCertificateOptionsError>>> + Send + 'async_trait>> where
    'life0: 'async_trait,
    Self: 'async_trait, [src]

Updates a certificate. Currently, you can use this function to specify whether to opt in to or out of recording your certificate in a certificate transparency log. For more information, see Opting Out of Certificate Transparency Logging.

Loading content...