[−][src]Module rsl10_pac::rf::rf_reg20

REG20

Structs

AGC_LUT_5_AGC_LEVEL_11_HI_W	Write proxy for field `AGC_LUT_5_AGC_LEVEL_11_HI`
TIMINGS_1_T_GRANULARITY_TX_W	Write proxy for field `TIMINGS_1_T_GRANULARITY_TX`
TIMINGS_1_T_GRANULARITY_RX_W	Write proxy for field `TIMINGS_1_T_GRANULARITY_RX`
TIMINGS_2_T_SUBBAND_TX_W	Write proxy for field `TIMINGS_2_T_SUBBAND_TX`
TIMINGS_2_T_TX_RF_W	Write proxy for field `TIMINGS_2_T_TX_RF`
TIMINGS_3_T_DLL_W	Write proxy for field `TIMINGS_3_T_DLL`
TIMINGS_3_T_PLL_TX_W	Write proxy for field `TIMINGS_3_T_PLL_TX`

AGC_LUT_5_AGC_LEVEL_11_HI_A	Look up table with the AGC values: agc_level_0 is supposed the lowest attenuation, while agc_level_11 is the one with a maximum of attenuation.
TIMINGS_1_T_GRANULARITY_TX_A	Fixes the granularity of the timer in Tx mode. The granularity is given by (2^(t_granularity-2))x1us
TIMINGS_1_T_GRANULARITY_RX_A	Fixes the granularity of the timer in Rx mode. The granularity is given by (2^(t_granularity))x1us
TIMINGS_2_T_SUBBAND_TX_A	Time needed by the subband algorithm to calibrate in Tx.
TIMINGS_2_T_TX_RF_A	Time needed by the Tx RF blocks to switch on.
TIMINGS_3_T_DLL_A	Time needed by the DLL blocks to switch on.
TIMINGS_3_T_PLL_TX_A	Time needed by the PLL blocks in Tx mode to switch on.

AGC_LUT_5_AGC_LEVEL_11_HI_R	Reader of field `AGC_LUT_5_AGC_LEVEL_11_HI`
R	Reader of register RF_REG20
TIMINGS_1_T_GRANULARITY_TX_R	Reader of field `TIMINGS_1_T_GRANULARITY_TX`
TIMINGS_1_T_GRANULARITY_RX_R	Reader of field `TIMINGS_1_T_GRANULARITY_RX`
TIMINGS_2_T_SUBBAND_TX_R	Reader of field `TIMINGS_2_T_SUBBAND_TX`
TIMINGS_2_T_TX_RF_R	Reader of field `TIMINGS_2_T_TX_RF`
TIMINGS_3_T_DLL_R	Reader of field `TIMINGS_3_T_DLL`
TIMINGS_3_T_PLL_TX_R	Reader of field `TIMINGS_3_T_PLL_TX`
W	Writer for register RF_REG20