[][src]Crate pest_derive

pest. The Elegant Parser

pest is a general purpose parser written in Rust with a focus on accessibility, correctness, and performance. It uses parsing expression grammars (or PEG) as input, which are similar in spirit to regular expressions, but which offer the enhanced expressivity needed to parse complex languages.

Getting started

The recommended way to start parsing with pest is to read the official book.

Other helpful resources:

  • API reference on docs.rs
  • play with grammars and share them on our fiddle
  • leave feedback, ask questions, or greet us on Gitter

.pest files

Grammar definitions reside in custom .pest files located in the src directory. Their path is relative to src and is specified between the derive attribute and empty struct that Parser will be derived on.

This example is not tested
#[derive(Parser)]
#[grammar = "path/to/my_grammar.pest"] // relative to src
struct MyParser;

Inline grammars

Grammars can also be inlined by using the #[grammar_inline = "..."] attribute.

Grammar

A grammar is a series of rules separated by whitespace, possibly containing comments.

Comments

Comments start with // and end at the end of the line.

This example is not tested
// a comment

Rules

Rules have the following form:

This example is not tested
name = optional_modifier { expression }

The name of the rule is formed from alphanumeric characters or _ with the condition that the first character is not a digit and is used to create token pairs. When the rule starts being parsed, the starting part of the token is being produced, with the ending part being produced when the rule finishes parsing.

The following token pair notation a(b(), c()) denotes the tokens: start a, start b, end b, start c, end c, end a.

Modifiers

Modifiers are optional and can be one of _, @, $, or !. These modifiers change the behavior of the rules.

  1. Silent (_)

    Silent rules do not create token pairs during parsing, nor are they error-reported.

    This example is not tested
    a = _{ "a" }
    b =  { a ~ "b" }

    Parsing "ab" produces the token pair b().

  2. Atomic (@)

    Atomic rules do not accept whitespace or comments within their expressions and have a cascading effect on any rule they call. I.e. rules that are not atomic but are called by atomic rules behave atomically.

    Any rules called by atomic rules do not generate token pairs.

    This example is not tested
    a =  { "a" }
    b = @{ a ~ "b" }
    
    WHITESPACE = _{ " " }

    Parsing "ab" produces the token pair b(), while "a b" produces an error.

  3. Compound-atomic ($)

    Compound-atomic are identical to atomic rules with the exception that rules called by them are not forbidden from generating token pairs.

    This example is not tested
    a =  { "a" }
    b = ${ a ~ "b" }
    
    WHITESPACE = _{ " " }

    Parsing "ab" produces the token pairs b(a()), while "a b" produces an error.

  4. Non-atomic (!)

    Non-atomic are identical to normal rules with the exception that they stop the cascading effect of atomic and compound-atomic rules.

    This example is not tested
    a =  { "a" }
    b = !{ a ~ "b" }
    c = @{ b }
    
    WHITESPACE = _{ " " }

    Parsing both "ab" and "a b" produce the token pairs c(a()).

Expressions

Expressions can be either terminals or non-terminals.

  1. Terminals

    Terminal Usage
    "a"
    ^"a"
    'a'..'z'
    a

Strings and characters follow Rust's escape mechanisms, while identifiers can contain alpha-numeric characters and underscores (_), as long as they do not start with a digit.

  1. Non-terminals

    Non-terminal Usage
    (e)
    e1 ~ e2
    e1 | e2
    e*
    e+
    e{n}
    e{, n}
    e{n,}
    e{m, n}
    e?
    &e
    !e
    PUSH(e)

    where e, e1, and e2 are expressions.

Expressions can modify the stack only if they match the input. For example, if e1 in the compound expression e1 | e2 does not match the input, then it does not modify the stack, so e2 sees the stack in the same state as e1 did. Repetitions and optionals (e*, e+, e{, n}, e{n,}, e{m,n}, e?) can modify the stack each time e matches. The !e and &e expressions are a special case; they never modify the stack.

Special rules

Special rules can be called within the grammar. They are:

  • WHITESPACE - runs between rules and sub-rules
  • COMMENT - runs between rules and sub-rules
  • ANY - matches exactly one char
  • SOI - (start-of-input) matches only when a Parser is still at the starting position
  • EOI - (end-of-input) matches only when a Parser has reached its end
  • POP - pops a string from the stack and matches it
  • POP_ALL - pops the entire state of the stack and matches it
  • PEEK - peeks a string from the stack and matches it
  • PEEK[a..b] - peeks part of the stack and matches it
  • PEEK_ALL - peeks the entire state of the stack and matches it
  • DROP - drops the top of the stack (fails to match if the stack is empty)

WHITESPACE and COMMENT should be defined manually if needed. All other rules cannot be overridden.

WHITESPACE and COMMENT

When defined, these rules get matched automatically in sequences (~) and repetitions (*, +) between expressions. Atomic rules and those rules called by atomic rules are exempt from this behavior.

These rules should be defined so as to match one whitespace character and one comment only since they are run in repetitions.

If both WHITESPACE and COMMENT are defined, this grammar:

This example is not tested
a = { b ~ c }

is effectively transformed into this one behind the scenes:

This example is not tested
a = { b ~ WHITESPACE* ~ (COMMENT ~ WHITESPACE*)* ~ c }

PUSH, POP, DROP, and PEEK

PUSH(e) simply pushes the captured string of the expression e down a stack. This stack can then later be used to match grammar based on its content with POP and PEEK.

PEEK always matches the string at the top of stack. So, if the stack contains ["b", "a"] ("a" being on top), this grammar:

This example is not tested
a = { PEEK }

is effectively transformed into at parse time:

This example is not tested
a = { "a" }

POP works the same way with the exception that it pops the string off of the stack if the match worked. With the stack from above, if POP matches "a", the stack will be mutated to ["b"].

DROP makes it possible to remove the string at the top of the stack without matching it. If the stack is nonempty, DROP drops the top of the stack. If the stack is empty, then DROP fails to match.

Advanced peeking

PEEK[start..end] and PEEK_ALL allow to peek deeper into the stack. The syntax works exactly like Rust’s exclusive slice syntax. Additionally, negative indices can be used to indicate an offset from the top. If the end lies before or at the start, the expression matches (as does a PEEK_ALL on an empty stack). With the stack ["c", "b", "a"] ("a" on top):

This example is not tested
fill = PUSH("c") ~ PUSH("b") ~ PUSH("a")
v = { PEEK_ALL } = { "a" ~ "b" ~ "c" }  // top to bottom
w = { PEEK[..] } = { "c" ~ "b" ~ "a" }  // bottom to top
x = { PEEK[1..2] } = { PEEK[1..-1] } = { "b" }
y = { PEEK[..-2] } = { PEEK[0..1] } = { "a" }
z = { PEEK[1..] } = { PEEK[-2..3] } = { "c" ~ "b" }
n = { PEEK[2..-2] } = { PEEK[2..1] } = { "" }

For historical reasons, PEEK_ALL matches from top to bottom, while PEEK[start..end] matches from bottom to top. There is currectly no syntax to match a slice of the stack top to bottom.

Rule

All rules defined or used in the grammar populate a generated enum called Rule. This implements pest's RuleType and can be used throughout the API.

Built-in rules

Pest also comes with a number of built-in rules for convenience. They are:

  • ASCII_DIGIT - matches a numeric character from 0..9
  • ASCII_NONZERO_DIGIT - matches a numeric character from 1..9
  • ASCII_BIN_DIGIT - matches a numeric character from 0..1
  • ASCII_OCT_DIGIT - matches a numeric character from 0..7
  • ASCII_HEX_DIGIT - matches a numeric character from 0..9 or a..f or A..F
  • ASCII_ALPHA_LOWER - matches a character from a..z
  • ASCII_ALPHA_UPPER - matches a character from A..Z
  • ASCII_ALPHA - matches a character from a..z or A..Z
  • ASCII_ALPHANUMERIC - matches a character from a..z or A..Z or 0..9
  • ASCII - matches a character from \x00..\x7f
  • NEWLINE - matches either "\n" or "\r\n" or "\r"

Derive Macros

Parser