Enum otter_api_tests::crates::otter_support::crates::nix::sys::socket::AddressFamily
[−]#[repr(i32)]
#[non_exhaustive]
pub enum AddressFamily {
Show 41 variants
Unix,
Inet,
Inet6,
Netlink,
Packet,
Ax25,
Ipx,
AppleTalk,
NetRom,
Bridge,
AtmPvc,
X25,
Rose,
Decnet,
NetBeui,
Security,
Key,
Ash,
Econet,
AtmSvc,
Rds,
Sna,
Irda,
Pppox,
Wanpipe,
Llc,
Ib,
Mpls,
Can,
Tipc,
Bluetooth,
Iucv,
RxRpc,
Isdn,
Phonet,
Ieee802154,
Caif,
Alg,
Nfc,
Vsock,
Unspec,
}Expand description
These constants specify the protocol family to be used
in socket and socketpair
References
Variants (Non-exhaustive)
This enum is marked as non-exhaustive
Unix
Local communication (see unix(7))
Inet
IPv4 Internet protocols (see ip(7))
Inet6
IPv6 Internet protocols (see ipv6(7))
Netlink
Kernel user interface device (see netlink(7))
Packet
Low level packet interface (see packet(7))
Ax25
Amateur radio AX.25 protocol
Ipx
IPX - Novell protocols
AppleTalk
AppleTalk
NetRom
AX.25 packet layer protocol. (see netrom(4))
Bridge
Can’t be used for creating sockets; mostly used for bridge links in rtnetlink(7) protocol commands.
AtmPvc
Access to raw ATM PVCs
X25
ITU-T X.25 / ISO-8208 protocol (see x25(7))
Rose
RATS (Radio Amateur Telecommunications Society) Open Systems environment (ROSE) AX.25 packet layer protocol. (see netrom(4))
Decnet
DECet protocol sockets.
NetBeui
Reserved for “802.2LLC project”; never used.
Security
This was a short-lived (between Linux 2.1.30 and 2.1.99pre2) protocol family for firewall upcalls.
Key
Key management protocol.
Ash
Econet
Acorn Econet protocol
AtmSvc
Access to ATM Switched Virtual Circuits
Rds
Reliable Datagram Sockets (RDS) protocol
Sna
IBM SNA
Irda
Socket interface over IrDA
Pppox
Generic PPP transport layer, for setting up L2 tunnels (L2TP and PPPoE)
Wanpipe
Legacy protocol for wide area network (WAN) connectivity that was used by Sangoma WAN cards
Llc
Logical link control (IEEE 802.2 LLC) protocol
Ib
InfiniBand native addressing
Mpls
Multiprotocol Label Switching
Can
Controller Area Network automotive bus protocol
Tipc
TIPC, “cluster domain sockets” protocol
Bluetooth
Bluetooth low-level socket protocol
Iucv
IUCV (inter-user communication vehicle) z/VM protocol for hypervisor-guest interaction
RxRpc
Rx, Andrew File System remote procedure call protocol
Isdn
New “modular ISDN” driver interface protocol
Phonet
Nokia cellular modem IPC/RPC interface
Ieee802154
IEEE 802.15.4 WPAN (wireless personal area network) raw packet protocol
Caif
Ericsson’s Communication CPU to Application CPU interface (CAIF) protocol.
Alg
Interface to kernel crypto API
Nfc
Near field communication
Vsock
VMWare VSockets protocol for hypervisor-guest interaction.
Unspec
Unspecified address family, (see getaddrinfo(3))
Implementations
impl AddressFamily
impl AddressFamily
pub const fn from_i32(family: i32) -> Option<AddressFamily>
pub const fn from_i32(family: i32) -> Option<AddressFamily>
Create a new AddressFamily from an integer value retrieved from libc, usually from
the sa_family field of a sockaddr.
Currently only supports these address families: Unix, Inet (v4 & v6), Netlink, Link/Packet and System. Returns None for unsupported or unknown address families.
Trait Implementations
impl Clone for AddressFamily
impl Clone for AddressFamily
fn clone(&self) -> AddressFamily
fn clone(&self) -> AddressFamily
Returns a copy of the value. Read more
1.0.0 · sourcefn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
Performs copy-assignment from source. Read more
impl Debug for AddressFamily
impl Debug for AddressFamily
impl Hash for AddressFamily
impl Hash for AddressFamily
impl PartialEq<AddressFamily> for AddressFamily
impl PartialEq<AddressFamily> for AddressFamily
impl Copy for AddressFamily
impl Eq for AddressFamily
impl StructuralEq for AddressFamily
impl StructuralPartialEq for AddressFamily
Auto Trait Implementations
impl RefUnwindSafe for AddressFamily
impl Send for AddressFamily
impl Sync for AddressFamily
impl Unpin for AddressFamily
impl UnwindSafe for AddressFamily
Blanket Implementations
sourceimpl<T> BorrowMut<T> for T where
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
const: unstable · sourcefn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
impl<T> Downcast for T where
T: Any,
impl<T> Downcast for T where
T: Any,
fn into_any(self: Box<T, Global>) -> Box<dyn Any + 'static, Global>ⓘNotable traits for Box<W, Global>impl<W> Write for Box<W, Global> where
W: Write + ?Sized, impl<R> Read for Box<R, Global> where
R: Read + ?Sized, impl<F, A> Future for Box<F, A> where
F: Future + Unpin + ?Sized,
A: Allocator + 'static, type Output = <F as Future>::Output;impl<I, A> Iterator for Box<I, A> where
I: Iterator + ?Sized,
A: Allocator, type Item = <I as Iterator>::Item;
fn into_any(self: Box<T, Global>) -> Box<dyn Any + 'static, Global>ⓘNotable traits for Box<W, Global>impl<W> Write for Box<W, Global> where
W: Write + ?Sized, impl<R> Read for Box<R, Global> where
R: Read + ?Sized, impl<F, A> Future for Box<F, A> where
F: Future + Unpin + ?Sized,
A: Allocator + 'static, type Output = <F as Future>::Output;impl<I, A> Iterator for Box<I, A> where
I: Iterator + ?Sized,
A: Allocator, type Item = <I as Iterator>::Item;
W: Write + ?Sized, impl<R> Read for Box<R, Global> where
R: Read + ?Sized, impl<F, A> Future for Box<F, A> where
F: Future + Unpin + ?Sized,
A: Allocator + 'static, type Output = <F as Future>::Output;impl<I, A> Iterator for Box<I, A> where
I: Iterator + ?Sized,
A: Allocator, type Item = <I as Iterator>::Item;
Convert Box<dyn Trait> (where Trait: Downcast) to Box<dyn Any>. Box<dyn Any> can
then be further downcast into Box<ConcreteType> where ConcreteType implements Trait. Read more
fn into_any_rc(self: Rc<T>) -> Rc<dyn Any + 'static>
fn into_any_rc(self: Rc<T>) -> Rc<dyn Any + 'static>
Convert Rc<Trait> (where Trait: Downcast) to Rc<Any>. Rc<Any> can then be
further downcast into Rc<ConcreteType> where ConcreteType implements Trait. Read more
fn as_any(&self) -> &(dyn Any + 'static)
fn as_any(&self) -> &(dyn Any + 'static)
Convert &Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot
generate &Any’s vtable from &Trait’s. Read more
fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)
fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)
Convert &mut Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot
generate &mut Any’s vtable from &mut Trait’s. Read more
impl<A> DynCastExt for A
impl<A> DynCastExt for A
fn dyn_cast<T>(
self
) -> Result<<A as DynCastExtHelper<T>>::Target, <A as DynCastExtHelper<T>>::Source> where
A: DynCastExtHelper<T>,
T: ?Sized,
fn dyn_cast<T>(
self
) -> Result<<A as DynCastExtHelper<T>>::Target, <A as DynCastExtHelper<T>>::Source> where
A: DynCastExtHelper<T>,
T: ?Sized,
Use this to cast from one trait object type to another. Read more
fn dyn_upcast<T>(self) -> <A as DynCastExtAdvHelper<T, T>>::Target where
A: DynCastExtAdvHelper<T, T, Source = <A as DynCastExtAdvHelper<T, T>>::Target>,
T: ?Sized,
fn dyn_upcast<T>(self) -> <A as DynCastExtAdvHelper<T, T>>::Target where
A: DynCastExtAdvHelper<T, T, Source = <A as DynCastExtAdvHelper<T, T>>::Target>,
T: ?Sized,
Use this to upcast a trait to one of its supertraits. Read more
fn dyn_cast_adv<F, T>(
self
) -> Result<<A as DynCastExtAdvHelper<F, T>>::Target, <A as DynCastExtAdvHelper<F, T>>::Source> where
A: DynCastExtAdvHelper<F, T>,
F: ?Sized,
T: ?Sized,
fn dyn_cast_adv<F, T>(
self
) -> Result<<A as DynCastExtAdvHelper<F, T>>::Target, <A as DynCastExtAdvHelper<F, T>>::Source> where
A: DynCastExtAdvHelper<F, T>,
F: ?Sized,
T: ?Sized,
fn dyn_cast_with_config<C>(
self
) -> Result<<A as DynCastExtAdvHelper<<C as DynCastConfig>::Source, <C as DynCastConfig>::Target>>::Target, <A as DynCastExtAdvHelper<<C as DynCastConfig>::Source, <C as DynCastConfig>::Target>>::Source> where
C: DynCastConfig,
A: DynCastExtAdvHelper<<C as DynCastConfig>::Source, <C as DynCastConfig>::Target>,
fn dyn_cast_with_config<C>(
self
) -> Result<<A as DynCastExtAdvHelper<<C as DynCastConfig>::Source, <C as DynCastConfig>::Target>>::Target, <A as DynCastExtAdvHelper<<C as DynCastConfig>::Source, <C as DynCastConfig>::Target>>::Source> where
C: DynCastConfig,
A: DynCastExtAdvHelper<<C as DynCastConfig>::Source, <C as DynCastConfig>::Target>,
Use this to cast from one trait object type to another. With this method the type parameter is a config type that uniquely specifies which cast should be preformed. Read more
sourceimpl<Q, K> Equivalent<K> for Q where
Q: Eq + ?Sized,
K: Borrow<Q> + ?Sized,
impl<Q, K> Equivalent<K> for Q where
Q: Eq + ?Sized,
K: Borrow<Q> + ?Sized,
sourcefn equivalent(&self, key: &K) -> bool
fn equivalent(&self, key: &K) -> bool
Compare self to key and return true if they are equal.
sourceimpl<T> Instrument for T
impl<T> Instrument for T
sourcefn instrument(self, span: Span) -> Instrumented<Self>ⓘNotable traits for Instrumented<T>impl<T> Future for Instrumented<T> where
T: Future, type Output = <T as Future>::Output;
fn instrument(self, span: Span) -> Instrumented<Self>ⓘNotable traits for Instrumented<T>impl<T> Future for Instrumented<T> where
T: Future, type Output = <T as Future>::Output;
T: Future, type Output = <T as Future>::Output;
sourcefn in_current_span(self) -> Instrumented<Self>ⓘNotable traits for Instrumented<T>impl<T> Future for Instrumented<T> where
T: Future, type Output = <T as Future>::Output;
fn in_current_span(self) -> Instrumented<Self>ⓘNotable traits for Instrumented<T>impl<T> Future for Instrumented<T> where
T: Future, type Output = <T as Future>::Output;
T: Future, type Output = <T as Future>::Output;
impl<V, T> VZip<V> for T where
V: MultiLane<T>,
impl<V, T> VZip<V> for T where
V: MultiLane<T>,
fn vzip(self) -> V
sourceimpl<T> WithSubscriber for T
impl<T> WithSubscriber for T
sourcefn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>ⓘNotable traits for WithDispatch<T>impl<T> Future for WithDispatch<T> where
T: Future, type Output = <T as Future>::Output; where
S: Into<Dispatch>,
fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>ⓘNotable traits for WithDispatch<T>impl<T> Future for WithDispatch<T> where
T: Future, type Output = <T as Future>::Output; where
S: Into<Dispatch>,
T: Future, type Output = <T as Future>::Output;
Attaches the provided Subscriber to this type, returning a
WithDispatch wrapper. Read more
sourcefn with_current_subscriber(self) -> WithDispatch<Self>ⓘNotable traits for WithDispatch<T>impl<T> Future for WithDispatch<T> where
T: Future, type Output = <T as Future>::Output;
fn with_current_subscriber(self) -> WithDispatch<Self>ⓘNotable traits for WithDispatch<T>impl<T> Future for WithDispatch<T> where
T: Future, type Output = <T as Future>::Output;
T: Future, type Output = <T as Future>::Output;
Attaches the current default Subscriber to this type, returning a
WithDispatch wrapper. Read more