pub enum DurationError {
InvalidCharacter(usize),
NumberExpected(usize),
UnknownUnit {
start: usize,
end: usize,
unit: String,
value: u64,
},
NumberOverflow,
Empty,
}
Expand description
Error parsing human-friendly duration
Variants
InvalidCharacter(usize)
Invalid character during parsing
More specifically anything that is not alphanumeric is prohibited
The field is an byte offset of the character in the string.
NumberExpected(usize)
Non-numeric value where number is expected
This usually means that either time unit is broken into words,
e.g. m sec
instead of msec
, or just number is omitted,
for example 2 hours min
instead of 2 hours 1 min
The field is an byte offset of the errorneous character in the string.
UnknownUnit
Fields
start: usize
Start of the invalid unit inside the original string
end: usize
End of the invalid unit inside the original string
unit: String
The unit verbatim
value: u64
A number associated with the unit
Unit in the number is not one of allowed units
See documentation of parse_duration
for the list of supported
time units.
The two fields are start and end (exclusive) of the slice from the original string, containing errorneous value
NumberOverflow
The numeric value is too large
Usually this means value is too large to be useful. If user writes data in subsecond units, then the maximum is about 3k years. When using seconds, or larger units, the limit is even larger.
Empty
The value was an empty string (or consists only whitespace)
Trait Implementations
impl Error for Error
impl Error for Error
1.30.0 · sourcefn source(&self) -> Option<&(dyn Error + 'static)>
fn source(&self) -> Option<&(dyn Error + 'static)>
The lower-level source of this error, if any. Read more
sourcefn backtrace(&self) -> Option<&Backtrace>
fn backtrace(&self) -> Option<&Backtrace>
backtrace
)Returns a stack backtrace, if available, of where this error occurred. Read more
1.0.0 · sourcefn description(&self) -> &str
fn description(&self) -> &str
use the Display impl or to_string()
impl StructuralPartialEq for Error
Auto Trait Implementations
impl RefUnwindSafe for Error
impl Send for Error
impl Sync for Error
impl Unpin for Error
impl UnwindSafe for Error
Blanket Implementations
impl<T> AsFail for T where
T: Fail,
impl<T> AsFail for T where
T: Fail,
fn as_fail(&self) -> &(dyn Fail + 'static)
fn as_fail(&self) -> &(dyn Fail + 'static)
Converts a reference to Self
into a dynamic trait object of Fail
.
sourceimpl<T> BorrowMut<T> for T where
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
const: unstable · sourcefn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
impl<T> Downcast for T where
T: Any,
impl<T> Downcast for T where
T: Any,
fn into_any(self: Box<T, Global>) -> Box<dyn Any + 'static, Global>ⓘNotable traits for Box<W, Global>impl<W> Write for Box<W, Global> where
W: Write + ?Sized, impl<R> Read for Box<R, Global> where
R: Read + ?Sized, impl<F, A> Future for Box<F, A> where
F: Future + Unpin + ?Sized,
A: Allocator + 'static, type Output = <F as Future>::Output;impl<I, A> Iterator for Box<I, A> where
I: Iterator + ?Sized,
A: Allocator, type Item = <I as Iterator>::Item;
fn into_any(self: Box<T, Global>) -> Box<dyn Any + 'static, Global>ⓘNotable traits for Box<W, Global>impl<W> Write for Box<W, Global> where
W: Write + ?Sized, impl<R> Read for Box<R, Global> where
R: Read + ?Sized, impl<F, A> Future for Box<F, A> where
F: Future + Unpin + ?Sized,
A: Allocator + 'static, type Output = <F as Future>::Output;impl<I, A> Iterator for Box<I, A> where
I: Iterator + ?Sized,
A: Allocator, type Item = <I as Iterator>::Item;
W: Write + ?Sized, impl<R> Read for Box<R, Global> where
R: Read + ?Sized, impl<F, A> Future for Box<F, A> where
F: Future + Unpin + ?Sized,
A: Allocator + 'static, type Output = <F as Future>::Output;impl<I, A> Iterator for Box<I, A> where
I: Iterator + ?Sized,
A: Allocator, type Item = <I as Iterator>::Item;
Convert Box<dyn Trait>
(where Trait: Downcast
) to Box<dyn Any>
. Box<dyn Any>
can
then be further downcast
into Box<ConcreteType>
where ConcreteType
implements Trait
. Read more
fn into_any_rc(self: Rc<T>) -> Rc<dyn Any + 'static>
fn into_any_rc(self: Rc<T>) -> Rc<dyn Any + 'static>
Convert Rc<Trait>
(where Trait: Downcast
) to Rc<Any>
. Rc<Any>
can then be
further downcast
into Rc<ConcreteType>
where ConcreteType
implements Trait
. Read more
fn as_any(&self) -> &(dyn Any + 'static)
fn as_any(&self) -> &(dyn Any + 'static)
Convert &Trait
(where Trait: Downcast
) to &Any
. This is needed since Rust cannot
generate &Any
’s vtable from &Trait
’s. Read more
fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)
fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)
Convert &mut Trait
(where Trait: Downcast
) to &Any
. This is needed since Rust cannot
generate &mut Any
’s vtable from &mut Trait
’s. Read more
impl<A> DynCastExt for A
impl<A> DynCastExt for A
fn dyn_cast<T>(
self
) -> Result<<A as DynCastExtHelper<T>>::Target, <A as DynCastExtHelper<T>>::Source> where
A: DynCastExtHelper<T>,
T: ?Sized,
fn dyn_cast<T>(
self
) -> Result<<A as DynCastExtHelper<T>>::Target, <A as DynCastExtHelper<T>>::Source> where
A: DynCastExtHelper<T>,
T: ?Sized,
Use this to cast from one trait object type to another. Read more
fn dyn_upcast<T>(self) -> <A as DynCastExtAdvHelper<T, T>>::Target where
A: DynCastExtAdvHelper<T, T, Source = <A as DynCastExtAdvHelper<T, T>>::Target>,
T: ?Sized,
fn dyn_upcast<T>(self) -> <A as DynCastExtAdvHelper<T, T>>::Target where
A: DynCastExtAdvHelper<T, T, Source = <A as DynCastExtAdvHelper<T, T>>::Target>,
T: ?Sized,
Use this to upcast a trait to one of its supertraits. Read more
fn dyn_cast_adv<F, T>(
self
) -> Result<<A as DynCastExtAdvHelper<F, T>>::Target, <A as DynCastExtAdvHelper<F, T>>::Source> where
A: DynCastExtAdvHelper<F, T>,
F: ?Sized,
T: ?Sized,
fn dyn_cast_adv<F, T>(
self
) -> Result<<A as DynCastExtAdvHelper<F, T>>::Target, <A as DynCastExtAdvHelper<F, T>>::Source> where
A: DynCastExtAdvHelper<F, T>,
F: ?Sized,
T: ?Sized,
fn dyn_cast_with_config<C>(
self
) -> Result<<A as DynCastExtAdvHelper<<C as DynCastConfig>::Source, <C as DynCastConfig>::Target>>::Target, <A as DynCastExtAdvHelper<<C as DynCastConfig>::Source, <C as DynCastConfig>::Target>>::Source> where
C: DynCastConfig,
A: DynCastExtAdvHelper<<C as DynCastConfig>::Source, <C as DynCastConfig>::Target>,
fn dyn_cast_with_config<C>(
self
) -> Result<<A as DynCastExtAdvHelper<<C as DynCastConfig>::Source, <C as DynCastConfig>::Target>>::Target, <A as DynCastExtAdvHelper<<C as DynCastConfig>::Source, <C as DynCastConfig>::Target>>::Source> where
C: DynCastConfig,
A: DynCastExtAdvHelper<<C as DynCastConfig>::Source, <C as DynCastConfig>::Target>,
Use this to cast from one trait object type to another. With this method the type parameter is a config type that uniquely specifies which cast should be preformed. Read more
impl<E> Fail for E where
E: 'static + Error + Send + Sync,
impl<E> Fail for E where
E: 'static + Error + Send + Sync,
fn cause(&self) -> Option<&(dyn Fail + 'static)>
fn cause(&self) -> Option<&(dyn Fail + 'static)>
Returns a reference to the underlying cause of this failure, if it is an error that wraps other errors. Read more
fn backtrace(&self) -> Option<&Backtrace>
fn backtrace(&self) -> Option<&Backtrace>
Returns a reference to the Backtrace
carried by this failure, if it
carries one. Read more
sourceimpl<T> Instrument for T
impl<T> Instrument for T
sourcefn instrument(self, span: Span) -> Instrumented<Self>ⓘNotable traits for Instrumented<T>impl<T> Future for Instrumented<T> where
T: Future, type Output = <T as Future>::Output;
fn instrument(self, span: Span) -> Instrumented<Self>ⓘNotable traits for Instrumented<T>impl<T> Future for Instrumented<T> where
T: Future, type Output = <T as Future>::Output;
T: Future, type Output = <T as Future>::Output;
sourcefn in_current_span(self) -> Instrumented<Self>ⓘNotable traits for Instrumented<T>impl<T> Future for Instrumented<T> where
T: Future, type Output = <T as Future>::Output;
fn in_current_span(self) -> Instrumented<Self>ⓘNotable traits for Instrumented<T>impl<T> Future for Instrumented<T> where
T: Future, type Output = <T as Future>::Output;
T: Future, type Output = <T as Future>::Output;
impl<V, T> VZip<V> for T where
V: MultiLane<T>,
impl<V, T> VZip<V> for T where
V: MultiLane<T>,
fn vzip(self) -> V
sourceimpl<T> WithSubscriber for T
impl<T> WithSubscriber for T
sourcefn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>ⓘNotable traits for WithDispatch<T>impl<T> Future for WithDispatch<T> where
T: Future, type Output = <T as Future>::Output;
where
S: Into<Dispatch>,
fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>ⓘNotable traits for WithDispatch<T>impl<T> Future for WithDispatch<T> where
T: Future, type Output = <T as Future>::Output;
where
S: Into<Dispatch>,
T: Future, type Output = <T as Future>::Output;
Attaches the provided Subscriber
to this type, returning a
WithDispatch
wrapper. Read more
sourcefn with_current_subscriber(self) -> WithDispatch<Self>ⓘNotable traits for WithDispatch<T>impl<T> Future for WithDispatch<T> where
T: Future, type Output = <T as Future>::Output;
fn with_current_subscriber(self) -> WithDispatch<Self>ⓘNotable traits for WithDispatch<T>impl<T> Future for WithDispatch<T> where
T: Future, type Output = <T as Future>::Output;
T: Future, type Output = <T as Future>::Output;
Attaches the current default Subscriber
to this type, returning a
WithDispatch
wrapper. Read more