Module nuc1xx::gpa::ien

GPIO Port Interrupt Enable

Structs

IF_EN_W	Write proxy for fields IF_EN(0-15)
IR_EN_W	Write proxy for fields IR_EN(0-15)

Enums

IF_EN_A

Port [A/B/C/D/E] Interrupt Enable by Input Falling Edge or Input Level Low IF_EN[n] used to enable the interrupt for each of the corresponding input GPIO_PIN[n]. Set bit to 1 also enable the pin wakeup function When set the IF_EN[n] bit to 1: If the interrupt is level trigger, the input PIN[n] state at level "low" will generate the interrupt. If the interrupt is edge trigger, the input PIN[n] state change from "high-to-low" will generate the interrupt

IR_EN_A

Port [A/B/C/D/E] Interrupt Enable by Input Rising Edge or Input Level High IR_EN[n] used to enable the interrupt for each of the corresponding input GPIO_PIN[n]. Set bit to 1 also enable the pin wakeup function When set the IR_EN[n] bit to 1: If the interrupt is level trigger, the input PIN[n] state at level "high" will generate the interrupt. If the interrupt is edge trigger, the input PIN[n] state change from "low-to-high" will generate the interrupt

Type Definitions

IF_EN_R	Reader of field IF_EN[%s]
IR_EN_R	Reader of field IR_EN[%s]
R	Reader of register IEN
W	Writer for register IEN