Module nrf52svd::radio

2.4 GHz Radio

Modules

base0	Base address 0
base1	Base address 1
bcc	Bit counter compare
crccnf	CRC configuration
crcinit	CRC initial value
crcpoly	CRC polynomial
crcstatus	CRC status
dab	Description collection[0]: Device address base segment 0
dacnf	Device address match configuration
dai	Device address match index
dap	Description collection[0]: Device address prefix 0
datawhiteiv	Data whitening initial value
events_address	Address sent or received
events_bcmatch	Bit counter reached bit count value.
events_crcerror	Packet received with CRC error
events_crcok	Packet received with CRC ok
events_devmatch	A device address match occurred on the last received packet
events_devmiss	No device address match occurred on the last received packet
events_disabled	RADIO has been disabled
events_end	Packet sent or received
events_payload	Packet payload sent or received
events_ready	RADIO has ramped up and is ready to be started
events_rssiend	Sampling of receive signal strength complete.
frequency	Frequency
intenclr	Disable interrupt
intenset	Enable interrupt
mode	Data rate and modulation
modecnf0	Radio mode configuration register 0
packetptr	Packet pointer
pcnf0	Packet configuration register 0
pcnf1	Packet configuration register 1
power	Peripheral power control
prefix0	Prefixes bytes for logical addresses 0-3
prefix1	Prefixes bytes for logical addresses 4-7
rssisample	RSSI sample
rxaddresses	Receive address select
rxcrc	CRC field of previously received packet
rxmatch	Received address
shorts	Shortcut register
state	Current radio state
tasks_bcstart	Start the bit counter
tasks_bcstop	Stop the bit counter
tasks_disable	Disable RADIO
tasks_rssistart	Start the RSSI and take one single sample of the receive signal strength.
tasks_rssistop	Stop the RSSI measurement
tasks_rxen	Enable RADIO in RX mode
tasks_start	Start RADIO
tasks_stop	Stop RADIO
tasks_txen	Enable RADIO in TX mode
tifs	Inter Frame Spacing in us
txaddress	Transmit address select
txpower	Output power
unused0	Unspecified

Structs

BASE0	Base address 0
BASE1	Base address 1
BCC	Bit counter compare
CRCCNF	CRC configuration
CRCINIT	CRC initial value
CRCPOLY	CRC polynomial
CRCSTATUS	CRC status
DAB	Description collection[0]: Device address base segment 0
DACNF	Device address match configuration
DAI	Device address match index
DAP	Description collection[0]: Device address prefix 0
DATAWHITEIV	Data whitening initial value
EVENTS_ADDRESS	Address sent or received
EVENTS_BCMATCH	Bit counter reached bit count value.
EVENTS_CRCERROR	Packet received with CRC error
EVENTS_CRCOK	Packet received with CRC ok
EVENTS_DEVMATCH	A device address match occurred on the last received packet
EVENTS_DEVMISS	No device address match occurred on the last received packet
EVENTS_DISABLED	RADIO has been disabled
EVENTS_END	Packet sent or received
EVENTS_PAYLOAD	Packet payload sent or received
EVENTS_READY	RADIO has ramped up and is ready to be started
EVENTS_RSSIEND	Sampling of receive signal strength complete.
FREQUENCY	Frequency
INTENCLR	Disable interrupt
INTENSET	Enable interrupt
MODE	Data rate and modulation
MODECNF0	Radio mode configuration register 0
PACKETPTR	Packet pointer
PCNF0	Packet configuration register 0
PCNF1	Packet configuration register 1
POWER	Peripheral power control
PREFIX0	Prefixes bytes for logical addresses 0-3
PREFIX1	Prefixes bytes for logical addresses 4-7
RSSISAMPLE	RSSI sample
RXADDRESSES	Receive address select
RXCRC	CRC field of previously received packet
RXMATCH	Received address
RegisterBlock	Register block
SHORTS	Shortcut register
STATE	Current radio state
TASKS_BCSTART	Start the bit counter
TASKS_BCSTOP	Stop the bit counter
TASKS_DISABLE	Disable RADIO
TASKS_RSSISTART	Start the RSSI and take one single sample of the receive signal strength.
TASKS_RSSISTOP	Stop the RSSI measurement
TASKS_RXEN	Enable RADIO in RX mode
TASKS_START	Start RADIO
TASKS_STOP	Stop RADIO
TASKS_TXEN	Enable RADIO in TX mode
TIFS	Inter Frame Spacing in us
TXADDRESS	Transmit address select
TXPOWER	Output power
UNUSED0	Unspecified