Module nrf52840_pac::radio
source · Expand description
2.4 GHz radio
Modules
Base address 0
Base address 1
Bit counter compare
IEEE 802.15.4 clear channel assessment control
CRC configuration
CRC initial value
CRC polynomial
CRC status
Description collection[n]: Device address base segment n
Device address match configuration
Device address match index
Description collection[n]: Device address prefix n
Data whitening initial value
IEEE 802.15.4 energy detect loop count
IEEE 802.15.4 energy detect level
Address sent or received
Bit counter reached bit count value
Wireless medium busy - do not send
Wireless medium in idle - clear to send
The CCA has stopped
Packet received with CRC error
Packet received with CRC ok
A device address match occurred on the last received packet
No device address match occurred on the last received packet
RADIO has been disabled
Sampling of energy detection complete. A new ED sample is ready for readout from the RADIO.EDSAMPLE register.
The sampling of energy detection has stopped
Packet sent or received
IEEE 802.15.4 length field received
MAC header match found
Packet payload sent or received
Generated in Ble_LR125Kbit, Ble_LR500Kbit and BleIeee802154_250Kbit modes when last bit is sent on air.
Ble_LR CI field received, receive mode is changed from Ble_LR125Kbit to Ble_LR500Kbit.
RADIO has ramped up and is ready to be started
Sampling of receive signal strength complete
RADIO has ramped up and is ready to be started RX path
RADIO has ramped up and is ready to be started TX path
Frequency
Disable interrupt
Enable interrupt
Search pattern configuration
Pattern mask
Data rate and modulation
Radio mode configuration register 0
Packet pointer
Packet configuration register 0
Packet configuration register 1
Payload status
Peripheral power control
Prefixes bytes for logical addresses 0-3
Prefixes bytes for logical addresses 4-7
RSSI sample
Receive address select
CRC field of previously received packet
Received address
IEEE 802.15.4 start of frame delimiter
Shortcut register
Current radio state
Start the bit counter
Stop the bit counter
Start the clear channel assessment used in IEEE 802.15.4 mode
Stop the clear channel assessment
Disable RADIO
Start the energy detect measurement used in IEEE 802.15.4 mode
Stop the energy detect measurement
Start the RSSI and take one single sample of the receive signal strength
Stop the RSSI measurement
Enable RADIO in RX mode
Start RADIO
Stop RADIO
Enable RADIO in TX mode
Interframe spacing in us
Transmit address select
Output power
Structs
Base address 0
Base address 1
Bit counter compare
IEEE 802.15.4 clear channel assessment control
CRC configuration
CRC initial value
CRC polynomial
CRC status
Description collection[n]: Device address base segment n
Device address match configuration
Device address match index
Description collection[n]: Device address prefix n
Data whitening initial value
IEEE 802.15.4 energy detect loop count
IEEE 802.15.4 energy detect level
Address sent or received
Bit counter reached bit count value
Wireless medium busy - do not send
Wireless medium in idle - clear to send
The CCA has stopped
Packet received with CRC error
Packet received with CRC ok
A device address match occurred on the last received packet
No device address match occurred on the last received packet
RADIO has been disabled
Sampling of energy detection complete. A new ED sample is ready for readout from the RADIO.EDSAMPLE register.
The sampling of energy detection has stopped
Packet sent or received
IEEE 802.15.4 length field received
MAC header match found
Packet payload sent or received
Generated in Ble_LR125Kbit, Ble_LR500Kbit and BleIeee802154_250Kbit modes when last bit is sent on air.
Ble_LR CI field received, receive mode is changed from Ble_LR125Kbit to Ble_LR500Kbit.
RADIO has ramped up and is ready to be started
Sampling of receive signal strength complete
RADIO has ramped up and is ready to be started RX path
RADIO has ramped up and is ready to be started TX path
Frequency
Disable interrupt
Enable interrupt
Search pattern configuration
Pattern mask
Data rate and modulation
Radio mode configuration register 0
Packet pointer
Packet configuration register 0
Packet configuration register 1
Payload status
Peripheral power control
Prefixes bytes for logical addresses 0-3
Prefixes bytes for logical addresses 4-7
RSSI sample
Receive address select
CRC field of previously received packet
Received address
Register block
IEEE 802.15.4 start of frame delimiter
Shortcut register
Current radio state
Start the bit counter
Stop the bit counter
Start the clear channel assessment used in IEEE 802.15.4 mode
Stop the clear channel assessment
Disable RADIO
Start the energy detect measurement used in IEEE 802.15.4 mode
Stop the energy detect measurement
Start the RSSI and take one single sample of the receive signal strength
Stop the RSSI measurement
Enable RADIO in RX mode
Start RADIO
Stop RADIO
Enable RADIO in TX mode
Interframe spacing in us
Transmit address select
Output power