Module nrf52810_pac::radio

2.4 GHz Radio

Modules

base0	Base address 0
base1	Base address 1
bcc	Bit counter compare
crccnf	CRC configuration
crcinit	CRC initial value
crcpoly	CRC polynomial
crcstatus	CRC status
dab	Description collection: Device address base segment n
dacnf	Device address match configuration
dai	Device address match index
dap	Description collection: Device address prefix n
datawhiteiv	Data whitening initial value
events_address	Address sent or received
events_bcmatch	Bit counter reached bit count value.
events_crcerror	Packet received with CRC error
events_crcok	Packet received with CRC ok
events_devmatch	A device address match occurred on the last received packet
events_devmiss	No device address match occurred on the last received packet
events_disabled	RADIO has been disabled
events_end	Packet sent or received
events_payload	Packet payload sent or received
events_ready	RADIO has ramped up and is ready to be started
events_rssiend	Sampling of receive signal strength complete.
frequency	Frequency
intenclr	Disable interrupt
intenset	Enable interrupt
mode	Data rate and modulation
modecnf0	Radio mode configuration register 0
packetptr	Packet pointer
pcnf0	Packet configuration register 0
pcnf1	Packet configuration register 1
power	Peripheral power control
prefix0	Prefixes bytes for logical addresses 0-3
prefix1	Prefixes bytes for logical addresses 4-7
rssisample	RSSI sample
rxaddresses	Receive address select
rxcrc	CRC field of previously received packet
rxmatch	Received address
shorts	Shortcuts between local events and tasks
state	Current radio state
tasks_bcstart	Start the bit counter
tasks_bcstop	Stop the bit counter
tasks_disable	Disable RADIO
tasks_rssistart	Start the RSSI and take one single sample of the receive signal strength.
tasks_rssistop	Stop the RSSI measurement
tasks_rxen	Enable RADIO in RX mode
tasks_start	Start RADIO
tasks_stop	Stop RADIO
tasks_txen	Enable RADIO in TX mode
tifs	Inter Frame Spacing in us
txaddress	Transmit address select
txpower	Output power

Structs

BASE0	Base address 0
BASE1	Base address 1
BCC	Bit counter compare
CRCCNF	CRC configuration
CRCINIT	CRC initial value
CRCPOLY	CRC polynomial
CRCSTATUS	CRC status
DAB	Description collection: Device address base segment n
DACNF	Device address match configuration
DAI	Device address match index
DAP	Description collection: Device address prefix n
DATAWHITEIV	Data whitening initial value
EVENTS_ADDRESS	Address sent or received
EVENTS_BCMATCH	Bit counter reached bit count value.
EVENTS_CRCERROR	Packet received with CRC error
EVENTS_CRCOK	Packet received with CRC ok
EVENTS_DEVMATCH	A device address match occurred on the last received packet
EVENTS_DEVMISS	No device address match occurred on the last received packet
EVENTS_DISABLED	RADIO has been disabled
EVENTS_END	Packet sent or received
EVENTS_PAYLOAD	Packet payload sent or received
EVENTS_READY	RADIO has ramped up and is ready to be started
EVENTS_RSSIEND	Sampling of receive signal strength complete.
FREQUENCY	Frequency
INTENCLR	Disable interrupt
INTENSET	Enable interrupt
MODE	Data rate and modulation
MODECNF0	Radio mode configuration register 0
PACKETPTR	Packet pointer
PCNF0	Packet configuration register 0
PCNF1	Packet configuration register 1
POWER	Peripheral power control
PREFIX0	Prefixes bytes for logical addresses 0-3
PREFIX1	Prefixes bytes for logical addresses 4-7
RSSISAMPLE	RSSI sample
RXADDRESSES	Receive address select
RXCRC	CRC field of previously received packet
RXMATCH	Received address
RegisterBlock	Register block
SHORTS	Shortcuts between local events and tasks
STATE	Current radio state
TASKS_BCSTART	Start the bit counter
TASKS_BCSTOP	Stop the bit counter
TASKS_DISABLE	Disable RADIO
TASKS_RSSISTART	Start the RSSI and take one single sample of the receive signal strength.
TASKS_RSSISTOP	Stop the RSSI measurement
TASKS_RXEN	Enable RADIO in RX mode
TASKS_START	Start RADIO
TASKS_STOP	Stop RADIO
TASKS_TXEN	Enable RADIO in TX mode
TIFS	Inter Frame Spacing in us
TXADDRESS	Transmit address select
TXPOWER	Output power