[−][src]Struct nrf_softdevice_s132::ble_gap_evt_adv_report_t
@brief Event structure for @ref BLE_GAP_EVT_ADV_REPORT.
@note If @ref ble_gap_adv_report_type_t::status is set to @ref BLE_GAP_ADV_DATA_STATUS_INCOMPLETE_MORE_DATA, not all fields in the advertising report may be available.
@note When ble_gap_adv_report_type_t::status is not set to @ref BLE_GAP_ADV_DATA_STATUS_INCOMPLETE_MORE_DATA, scanning will be paused. To continue scanning, call @ref sd_ble_gap_scan_start.
Fields
type_: ble_gap_adv_report_type_t
< Advertising report type. See @ref ble_gap_adv_report_type_t.
peer_addr: ble_gap_addr_t
< Bluetooth address of the peer device. If the peer_addr is resolved: @ref ble_gap_addr_t::addr_id_peer is set to 1 and the address is the peer's identity address.
direct_addr: ble_gap_addr_t
< Contains the target address of the advertising event if @ref ble_gap_adv_report_type_t::directed is set to 1. If the SoftDevice was able to resolve the address, @ref ble_gap_addr_t::addr_id_peer is set to 1 and the direct_addr contains the local identity address. If the target address of the advertising event is @ref BLE_GAP_ADDR_TYPE_RANDOM_PRIVATE_RESOLVABLE, and the SoftDevice was unable to resolve it, the application may try to resolve this address to find out if the advertising event was directed to us.
primary_phy: u8
< Indicates the PHY on which the primary advertising packet was received. See @ref BLE_GAP_PHYS.
secondary_phy: u8
< Indicates the PHY on which the secondary advertising packet was received. See @ref BLE_GAP_PHYS. This field is set to @ref BLE_GAP_PHY_NOT_SET if no packets were received on a secondary advertising channel.
tx_power: i8
< TX Power reported by the advertiser in the last packet header received. This field is set to @ref BLE_GAP_POWER_LEVEL_INVALID if the last received packet did not contain the Tx Power field. @note TX Power is only included in extended advertising packets.
rssi: i8
< Received Signal Strength Indication in dBm of the last packet received.
ch_index: u8
< Channel Index on which the last advertising packet is received (0-39).
set_id: u8
< Set ID of the received advertising data. Set ID is not present if set to @ref BLE_GAP_ADV_REPORT_SET_ID_NOT_AVAILABLE.
_bitfield_1: __BindgenBitfieldUnit<[u8; 2], u16>
data: ble_data_t
< Received advertising or scan response data. If @ref ble_gap_adv_report_type_t::status is not set to @ref BLE_GAP_ADV_DATA_STATUS_INCOMPLETE_MORE_DATA, the data buffer provided in @ref sd_ble_gap_scan_start is now released.
aux_pointer: ble_gap_aux_pointer_t
< The offset and PHY of the next advertising packet in this extended advertising event. @note This field is only set if @ref ble_gap_adv_report_type_t::status is set to @ref BLE_GAP_ADV_DATA_STATUS_INCOMPLETE_MORE_DATA.
Implementations
impl ble_gap_evt_adv_report_t
[src]
pub fn data_id(&self) -> u16
[src]
pub fn set_data_id(&mut self, val: u16)
[src]
pub fn new_bitfield_1(data_id: u16) -> __BindgenBitfieldUnit<[u8; 2], u16>
[src]
Trait Implementations
impl Clone for ble_gap_evt_adv_report_t
[src]
fn clone(&self) -> ble_gap_evt_adv_report_t
[src]
fn clone_from(&mut self, source: &Self)
1.0.0[src]
impl Copy for ble_gap_evt_adv_report_t
[src]
impl Debug for ble_gap_evt_adv_report_t
[src]
Auto Trait Implementations
impl !Send for ble_gap_evt_adv_report_t
impl !Sync for ble_gap_evt_adv_report_t
impl Unpin for ble_gap_evt_adv_report_t
Blanket Implementations
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,
impl<T> Borrow<T> for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
[src]
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
impl<T> From<T> for T
[src]
impl<T, U> Into<U> for T where
U: From<T>,
[src]
U: From<T>,
impl<T, U> TryFrom<U> for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T, U> TryInto<U> for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,